• Journal of the Korean Society of Costume
• /
• v.54 no.6
• /
• pp.141-148
• /
• 2004

This study examines the dyeability of fabrics in relation to dyeing temperature, time, concentration, and the number of repeated dyeings. For this study, at first we extracted natural dyes from the peel of C.umshiu mandarin, which is fast as a dye and considered as recycling agricultural wastes. Additionally, it represents the image of Jeju Island. Then, we dyed cotton, wool, silk and nylon fabrics with the extracted dyes. The findings of this study are as follows. 1) Dyed cotton, wool, silk and nylon fabrics with the extract of C.umshiu mandarin peel are generally yellow. 2) Wool, nylon, silk, and cotton, in this order, are of good dyeability; Wool fabrics have the highest dyeability and cotton fabrics have the lowest. The dyeabilty of cotton fabrics was not improved even after dyeing in different conditions. 3) Colorfastness with washing, rubbing and perspiration are all good, while colorfastness with light is poor. 4) Higher dyeing concentration makes better dyeability. 5) Dyeability is enhanced as the dyeing temperature increases, while the dyeability of silk and nylon is relatively good even at low temperatures. 6) Looking at dyeability according to dyeing time, the longer the dyeing time, the better the dyeablility. Sixty minutes of dyeing time is appropriate to dye fabrics. 7) With an increase in the number of repeated dyeings, increased dyeability is obtaihed.

• Fibers and Polymers
• /
• v.5 no.4
• /
• pp.303-308
• /
• 2004

A natural colorant was extracted from Cassia tara L. using buffer solutions (pH: 2-11) as extractants. The dyeing solution (Cassia tara L. extract) extracted using pH 9 buffer solution was found to give the highest K/S values of dyed fabrics. Cotton and silk fabrics were dyed with Cassia tara L. extract at $60^{\circ}C$ for 60 min with pre-treatment of various metal salts as mordants. It was found that Cassia tara L. extract was polygenetic dyestuffs and its major components were anthraquinones. Studies have been made on the effects of the kind of mordant on dyeing properties and colour fastnesses of cotton and silk fabrics. The K/S of cotton fabrics increased in the order of the dyeing using $FeSO_4 >CuSO_4> ZnSO_4> MnSO_4\cong Al_2(SO_4)_3 > NiSo_4 > none$, however, the K/S of silk fabrics increased in the order of the dyeing using $FeSO_4 > CuSO_4 > ZnSO_4\cong Al_2(SO_4)_3 > MnSO_4\cong NiSO_4 > none$. It was found that the K/S values of dyed fabrics were largely affected by the colour difference $(\DeltaE)$ between mordanted fabric and control fabric. However, they were not depended on the content of mordanted metal ion of the fabrics. Mordants $FeSO_4$ and CuSO_4$ for cotton fabric, $FeSO_4,\; CuSO_4,\; and\; Al_2(S0_4)_3$ for silk fabric were found to give good light fastness (rating 4).

• Journal of the Korean Society of Clothing and Textiles
• /
• v.43 no.2
• /
• pp.288-296
• /
• 2019

This study examined the proper dyeing conditions, color fastness and functionality for wool fabrics dyed with Chamaecyparis obtusa leaf extract. FT-IR and UV-Vis spectrum analysis showed that tannin and flavonoids were contained in the extracted colorant. The dyeing of wool fabrics using Chamaecyparis obtusa leaf was good without pretreatment or mordant treatment. Optimal dyeing conditions for wool fabrics were a colorant concentration of 70%(v/v), dyeing temperature of $100^{\circ}C$, dyeing time of 100 minutes and dyebath pH of 5.8. Color fastness of dyed wool fabrics to washing, rubbing, perspiration was good, whereas light was grade 3. The UV protection rate and deodorization rate of wool fabrics dyed with Chamaecyparis obtusa leaf improved. Reduction rate of Staphylococcus aureus/Klebsiella pneumoniae were excellent at 99.9%. Therefore, it was confirmed that Chamaecyparis obtusa leaf can be used as environ-mentally friendly natural dye.

• Textile Coloration and Finishing
• /
• v.11 no.3
• /
• pp.15-22
• /
• 1999

This study investigated the mordanting effect of natural mordants such as camellia ash, bean chaff ash and pyrolignite of iron(Iron(II) Acetate) on silk fabrics dyed with green tea extracts. Experimental variables include the conditions of extraction and dyeing, and types of natural mordants. Inorganic ion contents In natural mordants were analysed by Induced Coupled Plasma Atomic Emission Spectrometer. In the ash Al, Fe, Si and Mn were in % unit, Cr and Ni were detected in ppm unit, and in the aqueous extracts of the ash all the metal ions were in ppm unit. On the other hand, fairly high content of Al(2.13% ) in camellia ash extract and Fe(7.91% ) in the aqueous extracts of pyrolignite iron were detected. The absorbance intensity of green tea extracts in UV-Visible spectrum increased with the temperature and time of extraction. The maximum absorption wavelength of the extracts appeared at 272.5nm and 210.5nm. The US values of silk fabrics dyed with green tea extracts were increased with temperature and time of dyeing. Surface color of silk fabric dyed with green tea extracts was 9.1YR, but it was changed from 7.9YR to 7.5YR by camellia ash extract and 7.4YR to 6.4YR by bean chaff ash extract with increase in mordant concentration. Pre-mordanted and post-mordanted fabrics with pyrolignite of iron were changed from 1.4YR to 1.1R and 7.2P to 4.2P, respectively.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.37 no.7
• /
• pp.874-881
• /
• 2013

Dansam (Salvia miltiorrhiza Bunge) is a perennial plant that belongs to the Labiatae family and is characterized by red pigment found in the epidermis of its roots. Research on the dyeability of Dansam extract was performed with repeated trials under various conditions such as temperature, time, and mordant treatment. Silk fabrics were dyed with Dansam extract and mordanted with various agents such as Al, Fe, Cu, and Sn to evaluate the dyeability and functionality of Dansam extract; subsequently, the K/S value and the change of surface color were analyzed using a colorimeter. In addition, the dyeability of dyed fabrics (such as color fastness to washing, dry cleaning fastness, rubbing fastness and light fastness) and functionality (such as antibacterial activity and deodorization) were analyzed. The surface colors of all dyed fabrics were recorded and the results showed the presence of mostly YR series of colors; in addition, a GY color series appeared in the Fe pre-mordants of the silk fabric. The highest K/S values were recorded in Fe post-mordants. The washing fastness were Level 3 and Level 4; in addition, the dry-cleaning fastness showed excellent results at Level 4 and Level 5. The rubbing fastness was satisfactory at Level 3 and Level 4 and the light fastness was satisfactory at Level 4. The results of the measurements (that pertained to the antibacterial activity of fabrics dyed with Dansam extract) showed a 99.9% bacteria reduction rate of Staphylococcus aureus and Klebsiella pneumoniae. In regards to deodorization ability, dyed fabrics were found to have higher deodorization rates than those not dyed. The dyed fabric demonstrated exceptional deodorization qualities.

• Fashion & Textile Research Journal
• /
• v.14 no.4
• /
• pp.648-659
• /
• 2012

This research categorizes fundamental data needed to develop eco-friendly fabrics treated with bamboo leaf & pine leaf extracts. The effect of mordant on those fabrics was analyzed through the measurement of mechanical properties and the estimation of primary hand values for cotton and silk fabrics dyed with bamboo leaf and pine leaf extracts that were later treated with various mordants. When cotton was dyed with bamboo leaves and pine leaves extracts, EM, WT, 2HB, 2HG, 2HG5, LC, T, and W increased however, RT, SMD, and RC decreased compared to raw cotton fabric. The B, G, and MIU increased after mordant treatment to the dyed cotton and resulted in a stiffer and rougher cotton's hand. EM, WT, RT, MIU, WC, T, and W increased (in terms of silk); however, LT, B, 2HB, G, 2HG, 2HG5, MMD, SMD, and LC decreased compared to raw silk fabric. Similar to the dyed cotton, mordant treatment increased the MIU and LC of dyed silk subsequently, the hand became stiffer and rougher. A greater tannin adsorption results in an increased mechanical property and the primary hand value. For both fabrics, mordant treatment made its smoothness drop. However, the scale of drop for cotton was significant, while the scale of the drop for silk was minor. In terms of type of mordant, femordant and natural-mordant treatment influenced the tensile, shear, surface properties of fabrics, and primary hand values more than Cu-mordant and synthetic-mordant in addition, this increased the stiffness, hardness, and roughness of fabrics.

• Textile Coloration and Finishing
• /
• v.23 no.3
• /
• pp.179-186
• /
• 2011

For the application of Jeju scoria scattered around the island as a natural dye, cotton fabrics were dyed with the dye and their properties were measured including dyeability, colorfastness, antibacterial activity, deodorization efficiency, ultraviolet protection, and far-infrared emission. The dyed cotton fabrics were in yellowish red and optimal dyeing conditions were obtained with a colorant concentration of 25%(o.w.b) at a temperature of $80^{\circ}C$ for the dyeing time of 120 minutes. The ratings of colorfastness to light, rubbing, perspiration, and washing were 8, 5, 5, and 4~5 respectively. After 15 wash cycles, colorfastness remained as much as 4~5 rating. The cotton fabric dyed with Jeju scoria demonstrated excellent antimicrobial activity and deodorization efficiency of 99.9% and 93.9% respectively. Ultraviolet protection factor was 50+. Far-infrared emission rate and far-infrared emission intensity were 90% and 362(W/$m^2{\cdot}{\mu}m$) respectively. The Jeju scoria can be introduced as a new colorant for the natural dyeing of cotton.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.26 no.2
• /
• pp.263-269
• /
• 2002

This research was conducted to establish the efficient use of the colored rice bran fur dyeing textiles. To investigate the fabric dyeability of the colored rice bran extract, the anthocyanin pigments were extracted with water of different temperature ranges of 40 ~ 8$0^{\circ}C$ and were dyed on silk fabrics with different dyeing temperature $25^{\circ}C$~6$0^{\circ}C$, at acidic pH and neutral pH, respectively. Aluminum chloride was preheated with mordant K/S value and dyeing fastness of dyed silk fabrics were examined. The anthocyanins of the colored rice bran were stable and red color at acidic pH, red purple or purple blue at neutral pH, but unstable, blue color at alkaline pH. If extracting temperature and dyeing temperature of dyeing solution were higher, the dyeability was high, but the color of dyed fabric showed red tone. When extracting temperature was 8$0^{\circ}C$ and dyeing temperature of dyeing solution was 6$0^{\circ}C$, the dyeability was best. Without mordant, the dyeability of silk fabrics was higher in acidic pH than in neutral pH solution. With mordant, the dyeability was higher than without mordant, and also higher in acidic pH. Pretreatment of aluminum chloride resulted in the increase of color intensity and stability. The laundering fastness of dyed fabrics was good from grade 5 to grade 3-4. Because of the anthocyanins sensitivity on light radiation, the light fastness of dyed fabrics was poor from grade 3 to grade 1-2.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.121-121
• /
• 2012

To evaluate the Hwangsu spring as natural mordants effect on dyeing. The natural mordant effect of Hwangsu spring was analyzed by pH, temperature, trace elements and organic matter. Hwangsu spring having pH 2.42 and $14.4^{\circ}C$ was harvested at the end of September, 2011, in Yeongcheon(Gyeongbuk Province, Korea) and left on a $0^{\circ}C$ and $25^{\circ}C$ before use. The Result of ICP analysis, it contain bned Fe(414.9 ppm), Al(88.9 ppm), Mn(4.9 ppm). Dyeing and post-mordant procedure; Fabrics(cotton, silk, rayon) were dyed with natural colorants(Sopbora Japonica L., Caesalpinia sappan L., Allium cepa L.) for 20 min at $80^{\circ}C$. Hwangsu spring, aluminium sulfate $14-18H_2O(Al_2(SO_4)_3{\cdot}14-18H_2O)$, iron sulfate peptahydrate($FeSO_4{\cdot}7H_2O$), copper sulfate pentahydrate($CuSO_4{\cdot}5H_2O$) were used by post mordants. But in the case of Caesalpinia sappan L. was dyed after pre-mordanting with Al(II). The fabrics were dyed with each mordant solutions at $25^{\circ}C$ for 10min. The colorless also was measured by color-differnce meter. Comparison with a synthetic mordants, the K/S values of cotton fabrics dyed with Hwangsu sping were increased.

• The Research Journal of the Costume Culture
• /
• v.12 no.3
• /
• pp.407-414
• /
• 2004

A natural dye aqueous walnut shell extract was obtained by extraction of walnut shell using water at various conditions in this study. Silk fabrics were dyed at various dyeing and mordanting conditions using walnut shell extract and various mordants (Al, Cu, Fe ions). Studies have been made on the effects of dyeing and mordanting conditions on the dyeing properties and fastness (light, water and dry cleaning fastness) of dyed silk Fabric. The results obtained in this study were as follows;. The dye content in the walnut shell extract increased with increasing extraction temperature to 90℃ and extraction time to 120min, and thereafter the dye content decreased a little. The dry cleaning and water fastness of non-mordanted silk fabrics were better than those of mordanted silk fabrics.