• 대한기계학회논문집A
• /
• 제35권7호
• /
• pp.805-812
• /
• 2011

손가락형 전극과 압전섬유/에폭시 복합재료(MFC) 압전패치가 분포된 알루미늄 외팔보형의 에너지 회수장치를 설계하여 전기-기계적 특성을 연구하였다. 최대 전력을 얻기 위해서 보와 외부 가진이 공진주파수에서 진동하도록 하였다. ANSYS를 사용하여 해석기법을 개발했으며, 방법의 타당성 검증을 위해서 결과를 실험과 비교하였으며, 두 결과는 잘 일치하였다. 개발된 해석기법을 사용하여 PZT, PVDF, MFC 압전체에 의한 발생전압의 차이를 계산했으며, 압전체의 위치, 보의 치수가 성능에 미치는 영향을 연구하였다. 또한 MFC에 의한 최대 전압발생을 위해서 보의 치수에 대한 최적화가 수행되었으며, 그 결과 최적화된 보에서 1차고유진동수 24.5Hz에서 40.1V의 전압이 발생했으며 이 값은 PZT의 결과와 비슷하다. 그러나 압전섬유형 회수장치는 PZT보다 더 높은 내구수명이 기대되어 유리하다.

• 한국산학기술학회논문지
• /
• 제5권6호
• /
• pp.539-545
• /
• 2004

자연어 질의를 입력하고 문서로부터 질의에 대한 정답을 추출하여 제공하는 질의응답 시스템에서는 사용자의 질의 의도를 파악하여 질의 유형을 분류하는 과정이 매우 중요하다. 본 논문에서는 질의 유형을 분류하기 위해 복잡한 분류 규칙이나 대용량의 사전 정보를 이용하지 않고 질의의 의도를 나타내는 어휘들을 추출하고 인접 명사들의 의미 정보를 이용하여 질의 및 정답 유형을 결정할 수 있는 방법을 제안한다. 또 동의어 정보와 접미사 정보를 이용하고, 의문사가 생략된 경우 어휘 의미 정보를 이용하여 질의 유형 분류기의 성능을 향상시킬 수 있음을 보인다.

• International Journal of Computer Science & Network Security
• /
• 제22권2호
• /
• pp.413-423
• /
• 2022

The NHIS provides free or highly subsidized healthcare to all people by providing financial fortification. However, the financial sustainability of the scheme is threatened by numerous factors. Therefore, this work sought to provide a solution to process claims intelligently. The provided Petri net model demonstrated successful data flow among the various participant. For efficiency, scalability, and performance two main subsystems were modelled and integrated - data input and claims processing subsystems. We provided smart claims processing algorithm that has a simple and efficient error detection method. The complexity of the main algorithm is good but that of the error detection is excellent when compared to literature. Performance indicates that the model output is reachable from input and the token delivery rate is promising.

• Nuclear Engineering and Technology
• /
• 제42권3호
• /
• pp.319-328
• /
• 2010

Bonded tendons have been used in reactor buildings at some operating nuclear power plants in Korea. Assessing prestress force on these bonded tendons has become an important pending problem in efforts to assure continued operation beyond their design life. The System Identification (SI) technique was thus developed to improve upon the existing indirect assessment technique for bonded tendons. As a first step, this study analyzed the sensitivity of the key parameters to prestress force, and then determined the optimal parameters for the SI technique. A total of six scaled post-tensioned concrete beams with bonded tendons were manufactured. In order to investigate the correlation of the natural frequency and the displacement to prestress force, an impact test, a Single Input Multiple Output (SIMO) sine sweep test, and a bending test using an optical fiber sensor and compact displacement transducer were carried out. These tests found that both the natural frequency and the displacement show a good correlation with prestress force and that both parameters are available for the SI technique to predict prestress force. However, displacements by the optical fiber sensor and compact displacement transducer were shown to be more sensitive than the natural frequency to prestress force. Such displacements are more useful than the natural frequency as an input parameter for the SI technique.

• 디지털콘텐츠학회 논문지
• /
• 제9권3호
• /
• pp.461-470
• /
• 2008

영상기술을 이용하여 자연현상을 표현하는 방법에는 컴퓨터를 이용한 자연현상 시뮬레이션과 스크립트 기반으로 원하는 영상을 출력하는 방법이 있다. 대다수의 전문가들은 많은 데이터와 고도의 수식 등을 가지고 출력을 영상으로 획득한다. 이런 방법을 이용하여 출력영상을 취득하면 시간과 비용이 많이 소요된다는 문제점이 있다. 그래서 본 논문에서는 자연현상을 3차원 공간상에 구현함에 있어서 복잡한 수식이나 프로그래밍, 촬영 등을 배제하고 단지 2차원 이미지를 이용하여 유체의 자연현상 중 안개를 쉽게 표현함으로써 3차원 공간상에서 동양화 제작 시 배경처리를 효율적으로 표현할 수 있는 자연현상 라이브러리를 구축한다.

• 한국수소및신에너지학회논문집
• /
• 제23권5호
• /
• pp.545-550
• /
• 2012

This work is for the design study of natural gas reformer (40 $m^3/hr$ over). We used experimental kinetic data from literature. After that, we set up theoretical model based on experimental reaction kinetic data. The shape of reactor is 1.7 m long and 200 mm dia. with cylinder geometry. Volume of reactor is 53.4 liter. Average flow velocity of gases in the reactor has been determined 0.272 m/sec and residence time is 9.26 sec. Reaction temperature is $850^{\circ}C$, with pressure 9.3 Bar. Used natural gas volume is about 9.21 $m^3/hr$. Produced hydrogen is 43.7 $m^3/hr$ with no change of pressure. Unreacted natural gas is 0.09 $m^3/hr$ and the amount of steam is 26.9 $m^3/hr$. Steam to $CH_4$ (s/c ratio) is 2.91. Reforming reaction take place from the reactor entrance to 120 cm region of cylinder type reactor. After the entrance of reacting gases to 120 cm region, the reaction reaches equilibrium which is close to products. This study can be applicable to design various reactors. Output data is in good agreements with the data in literatures1).

• 한국소음진동공학회논문집
• /
• 제14권3호
• /
• pp.208-213
• /
• 2004

This paper is concerned with the theoretical estimation of the single-input single-output(SISO) positive position feedback(PPF) controller and the derivation of the stability conditions for the multi-input multi-output (MIMO) PPF controller. Although the stability condition for the SISO PPF controller was derived in the earlier works, the question regarding the performance estimation of the SISO PPF controller has never been studied theoretically. Hence, the SISO PPF controller for the single degree-of-freedom system was first investigated and then control parameters including gain, the filter frequency, and the damping factor of the PPF controller were analyzed in detail thus providing the design methodology for the SISO PPF controller. In the case of real structure. there are infinite number of natural modes so that some modes are to be controlled by a limited number of actuator and sensor. Based on the theoretical results on the SISO PPF controller, the stability condition for the multi-input multi-output PPF controller was derived when only the few number of modes are to be controlled. The control spillover problem is also discussed in detail.

• 전기학회논문지
• /
• 제66권5호
• /
• pp.819-832
• /
• 2017

We propose a new switching control scheme for a ball and beam system by utilizing two linearization methods. First, the Jacobian linearization is applied and state observer is developed afterward. Then, motivated [6], the approximate input-output linearization is carried out, and after that, the Jacobian linearization is applied along with the design of state observer. Since the second approach requires two linearizations, it is called a two-step linearization method. The state observer is needed for the estimation of the velocities of ball and motor movement. Since the Jacobian linearization based controller tends to provide faster response at the initial time, and after that, the two-step linearization based controller tends to provide better response in terms of output overshoot and convergence to the origin, it is natural to give a switching control scheme to provide the best overall control response. The validity of our control scheme is shown in both simulation and experimental results.

• Smart Structures and Systems
• /
• 제6권2호
• /
• pp.115-133
• /
• 2010

A modal filter is a tool used to extract the modal coordinates of each individual mode from a system's output. This is achieved by mapping the response vector from the physical space to the modal space. It decomposes the system's responses into modal coordinates, and thus, on the output of the filter, the frequency response with only one peak corresponding to the natural frequency to which the filter was tuned can be obtained. As was shown in the paper (Deraemecker and Preumont 2006), structural modification (e.g. a drop in stiffness or mass due to damage) causes the appearance of spurious peaks on the output of the modal filter. A modal filter is, therefore, a great indicator of damage detection, with such advantages as low computational effort due to data reduction, ease of automation and lack of sensitivity to environmental changes. This paper presents the application of modal filters for the detection of stiffness changes. Two experiments were conducted: the first one using the simulation data obtained from the numerical 7DOF model, and the second one on the experimental data from a laboratory stand in 4 states of damage.

• Journal of Construction Engineering and Project Management
• /
• 제1권2호
• /
• pp.43-48
• /
• 2011

In many parts of the world, low cost housing used to be built and maintained by the governments, based on designs and detail specifications prepared by the public sector with construction carried out by contractors. Results vary due to differences in design standards, workmanship and property management, depending also on the neighbourhood's care of the estates and their pattern of usage. In the UK, where Private Finance Initiative (PFI) has been used for infrastructure projects, there have been successful cases of city estate being transformed by PFI. These PFI housing schemes involve new-build, refurbishment as well as facility management. Unlike traditional construction, which is based on prescriptive specifications, PFI housing is based on output specifications. A study has been undertaken to compare the two specification approaches as they are applied to housing estate. Results are enlightening and serve as good reference to cities such as Hong Kong SAR and Singapore, where public housing provisions have been a major concern of their citizens as the building stock gets older.