• 한국무역상무학회:학술대회논문집
• /
• 2006.06a
• /
• pp.45-72
• /
• 2006

The Equator Principles are a set of voluntary environmental and social guidelines for ethical project finance. These principles commit banks and other signatories to not finance projects that fail to meet these guidelines. The principles were conceived in 2002 on an initiative of the International Finance Corporation and launched in 2003. Since then, dozens of major banks have adopted the Principles, and with these banks among them accounting for more than three quarters of all project loan market volume the Principles have become the de facto standard for all banks and investors on how to deal with potential social and environmental effects of projects to be financed. While regarding the Principles an important initiative, NGOs have criticised the Principles for not producing real changes in financing activities and for allowing projects to go through that should have been screened out by the Principles, such as the Sakhalin-II oil and gas project in Russia. In early 2006, a process of revision of the principles was begun. The Equator Principles state that endorsing banks will only provide loans directly to projects under the following circumstances: - The risk of the project is categorized in accordance with internal guidelines based upon the environmental and social screening criteria of the International Finance Corporation (IFC). - For all medium or high risk projects (Category A and B projects), sponsors complete an Environmental Assessment, the preparation of which must meet certain requirements and satisfactorily address key environmental and social issues. - The Environmental Assessment report addresses baseline environmental and social conditions, requirements under host country laws and regulations, applicable international treaties and agreements, sustainable development and use of renewable natural resources, protection of human health, cultural properties, and biodiversity, including endangered species and sensitive ecosystems, use of dangerous substances, major hazards, occupational health and safety, fire prevention and life safety, socio-economic impacts, land acquisition and land use, involuntary resettlement, impacts on indigenous peoples and communities, cumulative impacts of existing projects, the proposed project, and anticipated future projects, participation of affected parties in the design, review and implementation of the project, consideration of feasible environmentally and socially preferable alternatives, efficient production, delivery and use of energy, pollution prevention and waste minimization, pollution controls (liquid effluents and air emissions) and solid and chemical waste management. - Based on the Environmental Assessment, Equator banks then make agreements with their clients on how they mitigate, monitor and manage those risks through an 'Environmental Management Plan'. Compliance with the plan is required in the covenant. If the borrower doesn't comply with the agreed terms, the bank will take corrective action, which if unsuccessful, could ultimately result in the bank canceling the loan and demanding immediate repayment. - For risky projects, the borrower consults with stakeholders (NGO's and project affected groups) and provides them with information on the risks of the project. - If necessary, an expert is consulted. The Principles only apply to projects over 50 million US dollars, which, according to the Equator Principles website, represent 97% of the total market. In early 2006, the financial institutions behind the Principles launched stakeholder consultations and negotiations aimed at revising the principles. The draft revised principles were met with criticism from NGO stakeholders, who in a joint position paper argued that the draft fails by ignoring the most serious critiques of the principles: a lack of consistent and rigorous implementation.

• Environmental and Resource Economics Review
• /
• v.20 no.3
• /
• pp.531-565
• /
• 2011

All previous studies analyzing multivariate time series data of EUA (European Union Allowance) price commonly used endogenous variables within the four variables and included the period from April to June of 2006 in the analysis, when the price distortion occurred. This study uses graph theory and structural vector error correction model (SVECM) to analyze the daily time series data of the EUA (European Union Allowance) price. As endogenous variables, five variables are considered for the analysis, including prices of crude oil, natural gas, electricity and coal in addition to carbon price. Data period is Phase 2 period (April 21, 2008 to March 31, 2010) to avoid the EUA price distortion of Phase 1 period (2005~2007). Further, the monthly data including the economic variables as endogenous variables are analyzed.

• Journal of the Korean Applied Science and Technology
• /
• v.37 no.4
• /
• pp.906-914
• /
• 2020

To investigate the usefulness of natural plants, physicochemical characteristics, functional components and physiological activities of dodder(Cuscuta australis R.Brown) were experimented. The extraction of dodder was carried out at 60℃ in shaking bath with 10 times of distilled water for three hours. Harmful metals such as lead, cadmium and arsenic were not detected, but the content of mercury from dodder was 0.0004ppm in acceptable standards. The extraction yield was 23.45%, total content of phenolics equivalent to gallic acid was 699.8 mg/100g and total content of flavonoid equivalent to naringin was 373.8 mg/100g. 28 kinds of free amino acids were detected with the contents of 252mg/100g in the dodder extract, and the contents of anserine and sarcosine were analysed highest in all amino acids. From the comparison of physiological activities of dodder extract with those of ascorbic acid, total reducing power, electron donating ability based on DPPH radical scavenging and ferric reducing antioxidant power was equivalent to 88%, 56% and 40%, respectively, of ascorbic acid. The nitrite scavenging activity of dodder extract was 78% of ascorbic acid on pH 1.5, but the antioxidant index of dodder on perilla oil was about 4 times greater than that of ascorbic acid.

• The Korean Journal of Physiology and Pharmacology
• /
• v.21 no.3
• /
• pp.309-316
• /
• 2017

Transient receptor potential vanilloid 3 (TRPV3) is a non-selective cation channel with modest permeability to calcium ions. It is involved in intracellular calcium signaling and is therefore important in processes such as thermal sensation, skin barrier formation, and wound healing. TRPV3 was initially proposed as a warm temperature sensor. It is activated by synthetic small-molecule chemicals and plant-derived natural compounds such as camphor and eugenol. Schisandra chinensis (Turcz.) Baill (SC) has diverse pharmacological properties including antiallergic, anti-inflammatory, and wound healing activities. It is extensively used as an oriental herbal medicine for the treatment of various diseases. In this study, we investigated whether SC fruit extracts and seed oil, as well as four compounds isolated from the fruit can activate the TRPV3 channel. By performing whole-cell patch clamp recording in HEK293T cells overexpressing TRPV3, we found that the methanolic extract of SC fruit has an agonistic effect on the TRPV3 channel. Furthermore, electrophysiological analysis revealed that ${\gamma}$-schisandrin, one of the isolated compounds, activated TRPV3 at a concentration of $30{\mu}M$. In addition, ${\gamma}$-schisandrin (${\sim}100{\mu}M$) increased cytoplasmic $Ca^{2+}$ concentrations by approximately 20% in response to TRPV3 activation. This is the first report to indicate that SC extract and ${\gamma}$-schisandrin can modulate the TRPV3 channel. This report also suggests a mechanism by which ${\gamma}$-schisandrin acts as a therapeutic agent against TRPV3-related diseases.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.681-688
• /
• 2018

As environmental regulations have been strengthened and high fuel efficiency has been in demand in recent years, the number of ships using natural gas as a fuel is increasing. The demand for ships using LPG or methanol, which are emerging as eco-friendly vessel fuels, is also increasing. In this perspective, ME-LGI engines using LPG or methanol as a fuel have attracted considerable attention. Ships equipped with an ME-LGI engine are required to check the reliability of the fuel injection valve during shipping. This means that the development of a fuel injection valve tester is essential for the commercialization of ME-LGI engine. This study conducted the conceptual design of a fuel injection valve tester for ME-LGI engines using a system engineering process in the order of requirements analysis, functional analysis, and design synthesis. In the requirement analysis stage, the operating process of fuel injection valve was analyzed, and the necessity of checking the sealing oil leakage was then derived. In the functional analysis stage, the functions and flow of them were defined at each functional level. In the design synthesis stage, the equipment for each function was set and the process block diagram based on it was derived. In addition, preliminary risk analysis was performed as a part of system analysis and control, and safety measures were added to the conceptual design. This study is expected to be a good reference material for the concept design of other systems in the future because it shows the application process of a system engineering process to the conceptual design in detail.

• Journal of Korean Society for Atmospheric Environment
• /
• v.20 no.4
• /
• pp.555-569
• /
• 2004

Size -segregated measurements of aerosol composition using 8-stage DRUM impactor are used to determine the transport of natural and anthropogenic aerosols at Gosan site from 29 March to 30 May in 2002. Separation of ambient aerosols by DRUM impactor offers many Advantages over other standard filtration techniques. Some of the most important advantages are the ability to segregate into details by particle tire, to better preserve chemical integrity since the air stream doesn＇t pars through the deposit, to collect samples as a function of time, and to have a wide variety of impaction surfaces available to match analytical needs. Although the transport of Yellow sand is a well-known phenomenon in springtime, the result of measurement shows that not only soil dust but also anthropogenic aerosols, including sulfur, enriched trace metals such as Pb, Ni, Zn. Cu, Cr, As, Se, Br, are transported to Gosan in springtime. This study combines the size- and time-resolved aerosol composition measurements with isentropic, backward air-mass trajectories in order to identify some potential source regions of anthropogenic aerosols. As a result, during the NYS period, the average concentration of PM$_{10}$ was 46$\mu\textrm{g}$/㎥, Si, Al. S, Fe, Cl, K, Ca were higher than 1,000 ng/㎥ and Ti was about 100 ng/㎥. The concentrations of Zn, Mn, Cu. Pb, Br, Rb, V, Cr, Ni. At, Se ranged between 1 and 70 ng/㎥. More than 50% typical soil elements, tuck as Al, Si, Fe, Cd. Ti, Cr, Cu, Br. were distributed in a coarse particle range(5.0-12${\mu}{\textrm}{m}$). In other hand, anthropogenic pollutants, luck as S, N, Vi, were mainly distributed in a fine particle range (0.09-0.56${\mu}{\textrm}{m}$). During the YS period, PM$_{10}$ increased about 8 times than NYS period, and main soil elements, such as Al, Si, S, K, V, Mn, Fe also doubled in coarse particle range (1.15-12${\mu}{\textrm}{m}$). But Zn, As, Pb, Cu and Se, which distributed in the time aerosols (0.09-0.56${\mu}{\textrm}{m}$), were on the same level with or decreased than NYS period. Finally. except the YS Period, coarse particles (2.5-12${\mu}{\textrm}{m}$) are inferred to be influenced by soil, coal combustion, waste incineration, ferrous and nonferrous sources through similar pathways with Yellow Sand. But fine particles have different sources, such as coal combustion, gasoline vehicle, biomass burning, oil or coal combustion, nonferrous and ferrous metal sources, which are transported from China, Korea peninsula and local sources.ces.

• The Korean Journal of Pesticide Science
• /
• v.2 no.2
• /
• pp.113-118
• /
• 1998

The efficacy of conidia of Beauveria bassiana (Balsamo) Vuillemin strain CS-1 that showed high mortality in laboratory and net house was examined against diamondback moth larvae in the field. Conidia ($4{\times}10^{7}$ conidia/ml) were applied to larvae on chinese cabbage in a 1.5% emulsifiable oil-emulsion amended with 4% clay at a volume of 0.55 L/3.3 $m^{2}$. There were no significant differences among plants and replicates in the deposition of spray droplets on water-sensitive papers or of conidia on leaves and larvae. Weather conditions were rainy and cool during first few days, and then hot and dry. Persistence of conidia was equally short on both leaves and larvae. Nevertheless, treatment of B. bassiana potentially reduced larval populations. But the field efficacy was lower than the laboratory efficacy. This reduced efficacy was ascribed to unfavorable environmental conditions.

• Journal of Korea Technology Innovation Society
• /
• v.12 no.3
• /
• pp.471-498
• /
• 2009

The ability to judge a country's scientific standing is vital for the governments and businesses that must decide scientific priorities and funding. In this paper, we analyze the output and outcomes from research investment over the recent years, to measure the quality of scientific research on national scales and to set it in an international context. There are many ways to evaluate the quality of scientific research, but few have proved satisfactory. To measure the quantity and quality of science in different nations, we analyzed the numbers of published research papers and their citations. The number of citations per paper is a useful measure of the impact of a nation's research output. Essential at a were acquired from SCI database by Thomson Scientific, which indexes more than 8,000 journals, representing most significant materials in science and engineering. The purpose of this paper is to evaluate and compare the output and outcomes among nations in a variety of viewpoints and criteria. One of the implications in response to the result of analysis is that sustainable economic development in highly competitive world markets requires a direct engagement in the generation of knowledge. Even modest improvement in healthcare, clean water, sanitation, food, and transport need capabilities in engineering, technology, and medicine beyond many countries' reach. Nations exporting natural resources such as gold and oil can import technology and expertise, but only until these resources are exhausted. For them, sustainability should imply investment in alternative agricultural and technological capabilities through improvements in their skills base. A strong science base does not necessarily leat to wealth generation. However, strength in science has additional benefits for individual nations, and for the world as a whole.

• Journal of Wetlands Research
• /
• v.9 no.1
• /
• pp.69-78
• /
• 2007

Constructed wetlands and other aquatic systems have been successfully used for waste and wastewater treatment in either temperate or tropical regions. To treat waste or wastewater in a sustainable manner, the integrated eco-engineering designs are explained in this paper with 2 case studies: (i) a combination of vertical-flow constructed wetland (CW) with plant irrigation systemfor fecal sludge management and (ii) integrated CW units with landscaping at full-scale application for domestic wastewater treatment. The pilot-scale study of fecal sludge management employed 3 vertical-flow CW units, each with a dimension of $5{\times}5{\times}0.65m$ (width ${\times}$ length ${\times}$ media depth) and planted with cattails (Typha augustifolia). At the solid loading rate of 250 kg total solids (TS)/$m^2.yr$ and a 6-day percolate impoundment, the CW system could achieve chemical oxygen demand (COD), TS and total Kjeldahl nitrogen (TKN) removal efficiencies in the range of 80 - 96%. The accumulated sludge layers of about 80 - 90 cm was found at the CW bed surface after operating the CW units for 7 years, but no clogging problem has been observed. The CW percolate was applied to 16 irrigation Sunflower plant (Helianthus annuus) plots, each with a dimension of $4.5{\times}4.5m$ ($width{\times}length$). In the study, the CW percolate were fed to the treatment plots at the application rate of 7.5 mm/day but the percolate was mixed with tap water at different ratio of 20%, 80% and 100%. Based on a 1-year data of 3-crop plantation were experimented, the contents of Zn, Mn and Cu in soil of the experimental plots were found to increase with increasing in CW percolate ratios. The highest plant biomass yield and oil content of 1,000 kg/ha and 35%, respectively, were obtained from the plots fed with 20% or 50% of the CW percolate, whereas no accumulation of heavy metals in the plant tissues (i.e. leaves, stems and flowers) of the sunflower is found. In addition to the pilot-scale and field experiments, a case study of the integrated CW systems for wastewater treatment at Phi Phi Island (a Tsunami-hit area), Krabi province, Thailand is illustrated. The $5,200-m^2$ CW systems on Phi Phi Island are not only for treatment of $400m^3/day$ wastewater from hotels, households or other domestic activities, but also incorporating public consultation in the design processes, resulting in introducing the aesthetic landscaping as well as reusing of the treated effluent for irrigating green areas on the Island.

• Korean Journal of Ichthyology
• /
• v.8 no.1
• /
• pp.83-89
• /
• 1996

The early life history of Korean bullhead, Pseudobagrus fulvidraco was studied to obtain some information required in aquaculture and reinforcement of natural population. The fertilized eggs were almost spherical in shape and demersal. The egg membranes were transparent with minute folds on the surface, causing them to stick to other substrates. Yolk is yellowish without oil droplets. The eggs just after fertilization were measuring $1.4{\pm}0.03mm$(1.3~1.5mm, n=10) and expanded to $1.7{\pm}0.08mm$(1.6~1.8mm, n=10) in diameter in 1.5 hr. The blastodisc was formed in 30 min and cleavage started in 1 hr after fertilization, and the intervals of each stage of cleavage was about 30 min at $25.0^{\circ}C$. The yolk from 32-cell stage to gastrula stage partly depressed and the depressed part moved clockwise. Hatching occurred in 53 hr after fertilization and hatched embryos had 18~19+20~21(38~40) myomeres measuring 4.2~4.3mm in total length. At the age 7 d after hatching, 4 pairs of barbels were already formed ; 1 pair on the posterior part of the nostril, 1 pair on the upper jaw, and 2 pairs on the lower jaw. And the posterior margin of caudal fin changed into two folds. The lateral band and the form of all fins were completed in 3 weeks.