• 제목/요약/키워드: natural hybrid

검색결과 644건 처리시간 0.03초

묵납자루 Acheilognathus signifer와 납자루 A. lanceolatus 사이의 자연 잡종 출현 (Occurrence of a Natural Hybrid between Acheilognathus signifer and A. lanceolatus (Pisces: Cyprinidae))

  • 김형수;윤승운;김현태;박종영
    • 한국어류학회지
    • /
    • 제27권3호
    • /
    • pp.199-204
    • /
    • 2015
  • 묵납자루 Acheilognathus signifer와 납자루 A. lanceolatus간 잡종으로 추정되는 개체를 한강 수계의 김화남대천에서 채집하였다. 잡종의 기원을 확인하기 위하여 형태적 특징과 미토콘드리아 cytochrome b gene (cyt b)와 recombination-activating gene 1 (RAG-1)를 분석하였다. 외부 형태를 분석한 결과 잡종 개체는 등지느러미와 뒷지느러미 반문, 뒷지느러미 색깔, 몸의 체색 등은 두 부모종의 중간적 형질을 보였다. 미토콘드리아 cyt b 분석 결과 잡종 개체는 묵납자루와 염기서열이 99.9% 일치하여 묵납자루가 모계임이 밝혀졌다. 또한 RAG-1 분석 결과 double peak가 나타났는데 이는 잡종 개체임을 강력하게 시사하였다.

접착제 접합된 자연섬유강화 복합재료의 파괴강도 특성에 미치는 섬유 방향의 영향 (Effect of Fiber Orientation on Failure Strength Properties of Natural Fiber Reinforced Composites including Adhesive Bonded Joint)

  • 윤호철
    • Journal of Welding and Joining
    • /
    • 제24권5호
    • /
    • pp.43-48
    • /
    • 2006
  • This paper is concerned with a fracture strength study of composite adhesive lap joints. The tests were carried out on specimen joints manufactured hybrid stacked composites such as the polyester and bamboo natural fiber layer. The main objective of the work was to test the fracture strength using hybrid stacked composites with a polyester and bamboo natural fiber layer. Tensile and peel strength of hybrid stacked composites are tested before appling adhesive bonding. From results, Natural fiber reinforced composites have lower tensile strength than the original polyester. and The load directional orientation and small amount and low thickness of bamboo natural fiber layer have a good effect on the tensile and peel strength of natural fiber reinforced composites. The failure strength of these materials applied adhesive bonding is also affected by fiber orientation and thickness of bamboo natural fiber layer. There for, Fiber orientation of bamboo natural fiber layer have a great effect on the tensile-shear strength of natural fiber reinforced composites including adhesive bonded joints.

하이브리드 샤프트 설계 파라미터 변화에 따른 특성 연구 (A Study on Characteristics According to the Parameter Variation for Hybrid Shaft Design)

  • 홍용;김현식;홍동표
    • 한국소음진동공학회논문집
    • /
    • 제19권3호
    • /
    • pp.274-281
    • /
    • 2009
  • The carbon fiber epoxy composite material and aluminum have many advantages over other materials because of their high specific stiffness and good fatigue characteristics. Basically, the propeller shaft of automobile requires bending frequency of higher than 2,700 Nm and high natural frequency of higher than 9,200 rpm occurred by fast revolution. For this reason, natural frequency and torsion torque characteristics of hybrid shaft was studied in variation of its outer-diameter and thickness. Vibration and torque characteristics of hybrid shaft were compared by torsion tester, natural frequency experiments and FE analysis. Designed hybrid shaft satisfied its vibration and torque characteristics when its outer-diameter was 60 mm and thickness was 5 mm. Therefore, hybrid material enables to manufacture one piece structure hybrid propeller shaft rather than current two piece structure.

한강납줄개 Rhodeus pseudosericeus와 묵납자루 Acheilognathus signifer (Pisces: Cyprinidae)의 속간 자연 잡종 출현 (Occurrence of a Natural Intergeneric Hybrid between Rhodeus pseudosericeus and Acheilognathus signifer (Pisces: Cyprinidae) from the Namhangang (river), Korea)

  • 김형수;윤승운;고재근;박종영
    • 한국어류학회지
    • /
    • 제26권3호
    • /
    • pp.153-158
    • /
    • 2014
  • 한강납줄개 Rhodeus pseudosericeus와 묵납자루 Acheilognathus signifer의 속간 잡종으로 추정되는 개체를 한강 수계의 주천강에서 채집하였다. 잡종의 기원을 확인하기 위하여 형태적 특징과 mitochondrial cytochrome b (mt-cyb) gene을 조사하였다. 형태 형질 분석에서, 조사된 표본의 등지느러미의 반문, 체색, 체측 반점과 종대 무늬 등은 두 부모종의 중간적 형질을 보였다. 또한, 잡종 개체의 측선은 불완전하였고 측선유공린수는 부모종의 중간값을 보였다. mt-cyb gene 분석 결과 잡종 개체는 한강납줄개와 염기서열이 100% 일치하여 한강납줄개가 모계임이 밝혀졌다. 따라서 두 자료의 분석 결과 본 연구에서 조사한 개체는 한강납줄개와 묵납자루의 속간 자연 잡종 개체임을 확인하였다.

하이브리드 샤프트 설계 파라미터 변화에 따른 특성 연구 (A study on characteristics according to the parameter variation for hybrid shaft design)

  • 홍동표;김현식;홍용
    • 한국소음진동공학회:학술대회논문집
    • /
    • 한국소음진동공학회 2008년도 추계학술대회논문집
    • /
    • pp.99-104
    • /
    • 2008
  • The Carbon fiber epoxy composite material and aluminum have many advantages about higher specific stiffness and good fatigue characteristics. basically, the propeller shaft of automobile must satisfy high natural frequency more than 9,200 rpm to satisfy high number of rotation and high torsion torque more than 2,700Nm. In these reason, studied natural frequency and torsion torque characteristics of shaft according to parameter variations with the outdiameter and thickness. From the torsion tester and natural frequency experiments FE analyses was compared vibration and torque characteristics of hybrid shaft Designed hybrid shaft was experimented through FFT analyzer and torsion tester each and satisfied that hybrid shaft reverence 60mm and thickness 5mm by a these experiment is most suitable. Therefore, that can manufacture existent steel two piece type propeller shaft to one piece type hybrid shaft.

  • PDF

Electrical Conductivity of Chemically Reduced Graphene Powders under Compression

  • Rani, Adila;Nam, Seung-Woong;Oh, Kyoung-Ah;Park, Min
    • Carbon letters
    • /
    • 제11권2호
    • /
    • pp.90-95
    • /
    • 2010
  • Carbon materials such as graphite and graphene exhibit high electrical conductivity. We examined the electrical conductivity of synthetic and natural graphene powders after the chemical reduction of synthetic and natural graphite oxide from synthetic and natural graphite. The trend of electrical conductivity of both graphene (synthetic and natural) was compared with different graphite materials (synthetic, natural, and expanded) and carbon nanotubes (CNTs) under compression from 0.3 to 60 MPa. We found that synthetic graphene showed a marked increment in electrical conductivity compared to natural graphene. Interestingly, the total increment in electrical conductivity was greater for denser graphite; however, an opposite behavior was observed in nanocarbon materials such as graphene and CNTs, probably due to the differing layer arrangement of nanocarbon materials.

자연환기와 복사냉방을 병용한 하이브리드 시스템의 제안 (A Proposal of Hybrid Cooling System Coupled with Radiation Panel Cooling and Natural Ventilation)

  • 송두삼
    • 설비공학논문집
    • /
    • 제15권6호
    • /
    • pp.543-550
    • /
    • 2003
  • In order to saving the energy for HVAC system of buildings, utilization of wind-induced cross ventilation is thought to be promising. However, utilization of natural ventilation alone is not sufficient for maintaining the human thermal-comfort such as in hot and humid regions. A hybrid air conditioning system with a controlled natural ventilation system, or combination of natural ventilation with mechanical air conditioning is thought to overcome the deficiency of wind-driven cross ventilation and to have significant effects on energy reduction. This paper describes a concept of hybrid system and propose a new type of hybrid system using radiational cooling with wind-induced cross ventilation. Moreover, a radiational cooling system is compared with an all-air cooling system. The characteristics of the indoor environment will be examined through CFD (Computational Fluid Dynamics) simulation, which is coupled with a radiation heat transfer simulation and with HVAC control in which the PMV value for the human model in the center of the room is controlled to attain the target value.

Antimicrobial Ceramic Hybrid Polyethylene Films with Chamomile Extracts for Feed Packaging

  • Lee, Hye Sun;Chang, Jeong Ho
    • 한국세라믹학회지
    • /
    • 제54권3호
    • /
    • pp.228-234
    • /
    • 2017
  • This work was achieved on the preparation of antimicrobial ceramic hybrid polyethylene films with natural chamomile extracts. The antimicrobial activity and various physicochemical properties of the prepared films were evaluated. Various natural products demonstrated antimicrobial activity. Among them, chamomile extracts showed strong activity and no cytotoxicity rather than that of the natural extracts. Porous ceramic materials were synthesized and demonstrated loading and controlled release of natural antimicrobial extracts. Furthermore, chamomile loaded ceramic hybrid films showed antimicrobial activity that was maintained for over 15 days.

리튬이온전지용 하이브리드형 탄소의 탄소부극 특성 (The nagative carbon electrode properties of hybrid carbon for lithium ion batteries)

  • 양동복;박용필
    • 한국전기전자재료학회:학술대회논문집
    • /
    • 한국전기전자재료학회 2004년도 하계학술대회 논문집 Vol.5 No.2
    • /
    • pp.1199-1202
    • /
    • 2004
  • 리튬이온전지 음극활질용으로 Hybrid of pitch based graphite impregnating natural graphite와 Hybrid of pitch based carbon impregnating natural graphite로 탄소전극을 제작하여 전기화학적인 특성을 연구하였다. Natural graphite에 pitch based graphite나 pitch based carbon의 혼합은 흑연의 이론용량인 372 mAh/g를 초과하는 고용량을 나타내었다. 이것은 극소공동에 리튬종의 삽입과 탈삽입에 의한 것으로 파악된다. 그러나 충 방전이 계속 진행되면서 방전용량이 급격히 저하되는 현상이 관찰되었다. X-선 회절분석 결과로부터 Hybrid of pitch based carbon impregnating natural graphite 탄소전극에는 amorphous carbon이 상대적으로 다량 존재한다는 것을 확인하였고, 이는 리튬의 삽입된 상태의 전위에 분포가 있어 충 방전시에 완만한 전압의 구배를 만들며, 비가역용량을 증가시키는 요인으로 파악되었다.

  • PDF

Lattice Boltzmann 방법을 사용한 자연대류 해석에서 열모델의 선택에 관한 연구 (A STUDY ON THE CHOICE OF THERMAL MODELS IN THE COMPUTATION OF NATURAL CONVECTION WITH THE LATTICE BOLTZMANN METHOD)

  • 최석기;김성오
    • 한국전산유체공학회지
    • /
    • 제16권4호
    • /
    • pp.7-13
    • /
    • 2011
  • A comparative analysis of thermal models in the lattice Boltzmann method(LBM) for the simulation of laminar natural convection in a square cavity is presented. A HYBRID method, in which the thermal equation is solved by the Navier-Stokes equation method while the mass and momentum conservation are resolved by the lattice Boltzmann method, is introduced and its merits are explained. All the governing equations are discretized on a cell-centered, non-uniform grid using the finite-volume method. The convection terms are treated by a second-order central-difference scheme with a deferred correction method to ensure stability of the solutions. The HYBRID method and the double-population method are applied to the simulation of natural convection in a square cavity and the predicted results are compared with the benchmark solutions given in the literatures. The predicted results are also compared with those by the conventional Navier-Stokes equation method. In general, the present HYBRID method is as accurate as the Navier-Stokes equation method and the double-population method. The HYBRID method shows better convergence and stability than the double-population method. These observations indicate that this HYBRID method is an efficient and economic method for the simulation of incompressible fluid flow and heat transfer problem with the LBM.