• Journal of The Korean Society of Agricultural Engineers
• /
• v.55 no.4
• /
• pp.29-35
• /
• 2013

The objective of the current study is to evaluate the effects depending on the types of reinforcing fibers being influential in view of mechanical properties and impact resistance of hybrid fiber reinforced concrete (HFRC) for applications to precast concrete structure. Hybrid fibers applied therefor were three types such as PP/MSF (polypropylene fiber+macro synthetic fiber), PVA/MAF (polyvinyl alcohol fiber+MSF) and JUTE/MSF (natural jute fiber+MSF), where the volume fraction of PP, PVA and natural jute was applied with 0.2 %, respectively, while based on 0.05 % volume fraction of MSF. The HFRC was tested for slump, compressive strength, flexural strength and impact resistance. The test result demonstrated that mixture of such hybrid fibers improve compressive strength, flexural strength and impact resistance of concrete. Moreover, it was found that HFRCs to which hydrophilic fibers, i.e. PVA/MSF and JUTE/MSF, were mixed show more improved features that HFRC to which non-hydrophilic fiber, i.e. PP/MSF was mixed. Meanwhile, the finding that PVA/MSF HFRC exhibited better performance than JUTE/MSF HFRC was attributed from the former having higher aspect ratio than that of the latter.

• Journal of Ocean Engineering and Technology
• /
• v.34 no.6
• /
• pp.481-488
• /
• 2020

Composite materialsuch as glass-fiber reinforced plastic and carbon-fiber reinforced plastic (CFRP) shows anisotropic property and have been widely used for structural members and outfitings of ships. The structural safety of composite structures has been generally evaluated via finite element analysis. This paper presents a technique for updating the finite element model of anisotropic beams or plates via natural frequencies. The finite element model updates involved a compensation process of anisotropic material properties, such as the elastic and shear moduli of orthotropic structural members. The technique adopted was based on a discrete genetic algorithm, which is an optimization technique. The cost function was adopted to assess the optimization problem, which consisted of the calculated and referenced low-order natural frequencies for the target structure. The optimization process was implemented with MATLAB, which includes the finite element updates and the corresponding natural frequency calculations with MSC/NASTRAN. Material properties of a virtual cantilevered orthotropic beam were estimated to verify the presented method and the results obtained were compared with the reference values. Furthermore, the technique was applied to a cantilevered CFRP beam to successfully estimate the unknown material properties.

• Journal of the Korean Society for Precision Engineering
• /
• v.26 no.4
• /
• pp.107-113
• /
• 2009

In this paper, we studied of measurement the vibration of natural frequency using optical fiber sensor. The boring bar for measurement of vibration in use optical fiber sensor has the advantage of direct measure for the frequency than accelerometer. Because it deal with output value on electrical signal of optical fiber in physical disturbance when it measures the frequency of vibration. The optical fiber sensor measured the vibration of boring bar by the gap in sensing jig while optical fiber just kept contact with boring bar. A prototype system was composed of jig part with gap and optical system part. In this paper, we found out the possibility to measurement of vibration by the gap in use optical fiber.

• Proceedings of the Korean Institute of Building Construction Conference
• /
• 2013.05a
• /
• pp.321-322
• /
• 2013

Recently, the exhaustion of resource and environmental damage is serious due to the global warming because of the CO₂ exhaust and each type the natural aggregate picking described below. meanwhile, The rest is the actual condition gone to the dumping ground that there is nearly no use which the waste glass can recycle and it is recycled. This research applied the waste glass as the cement substitute material the inorganic binder and coares aggregate substitute material. It utilizes the substitute material of the cement according to it and natural aggregate and tries to develop the environment-friendly artificial stone. The inorganic binder used the blast furnace slag, red mud, and fly ash. The straight type steel fiber, PVA fiber, PA fiber, and cellulosic fiber were used with a kind of fiber. As to the experimental item according to it, the compressive strength is the flexural strength and compressive strength.

• Textile Coloration and Finishing
• /
• v.32 no.1
• /
• pp.44-50
• /
• 2020

In this study, pre-treatment was performed on kapok, a hydrophobic fiber, to compare dyeability by hydrophilization. The pretreatment conditions of kapok fiber were used with different amounts of sodium oleate(NaO), a fatty acid-based anionic surfactant, and xanthan gum(XG) as a natural thickener. At this time, NaO and XG were separately or mixed treated with 0.01%, 0.1%, 1% aqueous solution at 80℃ for 30 min. Hydrophilicity through dyeing was confirmed using Sappan wood extract. Therefore, SEM observation was performed to investigate the surface change of kapok fiber according to the conditions. The surface color difference was also analyzed. Pretreated kapok fibers were made from nonwoven fabrics and the contact angles were measured to determine their hydrophilization. The surface of the fiber after pretreatment was found to be cracked when NaO and NaO were mixed with XG. The surface color was the highest in a^⁎ and K/S values after the simultaneous treatment of NaO and XG, followed by NaO pretreatment and XG pretreatment. The contact angle of kapok fiber made of nonwoven fabric was slightly lower at 300g/㎡ than the fabric weight of 150g/㎡. Such hydrophilized nonwoven kapok fiber are expected to be used in various fields.

• Advances in concrete construction
• /
• v.5 no.1
• /
• pp.1-15
• /
• 2017

This research project aimed at evaluating experimentally the effect of natural perlite powder as an alternative supplementary cementing material (SCM) on the performance of fiber reinforced self-consolidating repair mortars (FR-SCRMs). For this purpose, four FR-SCRMs mixes incorporating 0%, 10%, 20%, and 30% of natural perlite powder as cement replacements were prepared. The evaluation was based on fresh (slump flow, flow time, and unit weight), hardened (air-dry unit weight, compressive and flexural strengths, dynamic modulus of elasticity), and durability (water absorption test) performances. The results reveal that structural repair mortars confronting the performance requirements of class R4 materials (European Standard EN 1504-3) could be designed using 10%, 20%, and 30% of perlite powder as cement substitutions. Bonding results between repair mortars containing perlite powder and old concrete substrate investigated by the slant shear test showed good interlocking justifying the effectiveness of these produced mortars.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.9 no.1
• /
• pp.1-13
• /
• 2006

The recent environmental protection issue has diminished the supply of sand for soft ground improvements so much that the prices of sand have shown a sudden rise. Plastic material is one of substitutes for sand material, but plastic is nonperishable and doubtable if it has potential environmental hormone disrupting substances. Moderate-priced natural fiber drain board made with coconut coir and jute filter are in the spotlight recently as an alternative material for sand and plastic drain board etc. Natural fiber drain has not only competitive price but also a characteristic of assimilation into the soils after finishing of its own function. Discharge capacity of the fiber drain board evaluated by triaxial type discharge capacity test was relatively lower than that of plastic drain board. Nevertheless, settlement and pore pressure dissipation behaviors of the fiber drain board and the plastic drain board which were installed in the clayey soil during the composite discharge capacity test were almost similar. It was also found that biodegradation of the fiber drain board was in progress until 18 month after installation in the clayey soil, but they had still enough engineering properties to use at field.

• Journal of the Korean Wood Science and Technology
• /
• v.46 no.4
• /
• pp.393-401
• /
• 2018

Natural fibers derived from lignocellulosic materials are considered to be more environment-friendly than petroleum-based synthetic fibers. Several natural fibers, such as seedpod fibers, have a potential for development, including kapok and balsa fibers. The characteristics of both fibers were evaluated to determine their suitability for specific valuable applications. The purpose of this study was to analyze some important fundamental properties of kapok and balsa fibers, including their dimensions, morphology, chemical components, and wettability. The results showed that the average fiber lengths for kapok and balsa were 1.63 and 1.30 cm, respectively. Kapok and balsa fibers had thin cell walls and large lumens filled with air. The kapok fiber was composed of 38.09% ${\alpha}-cellulose$, 14.09% lignin, and 2.34% wax content, whereas the balsa fiber was composed 44.62% ${\alpha}-cellulose$, 16.60% lignin, and 2.29% wax content. The characteristics of kapok and balsa fibers were examined by X-ray diffraction, Fourier-transform infrared spectroscopy and differential scanning calorimetry analyses. The contact angle of the distilled water on kapok and balsa fibers was more than $90^{\circ}$, indicating that both fibers are hydrophobic with low wettability properties because of to the presence of wax on the fiber surface.

• Textile Coloration and Finishing
• /
• v.27 no.4
• /
• pp.281-287
• /
• 2015

The aim of this study was to investigate the possibility utilizing Metasequoia(Metasequoia glyptostroboides) cone as a new natural dye resource. In previous study, dyeing onto cotton fiber was carried out and Metasequoia cone colorant showed low affinity to cotton fiber and maximum dye uptake was obtained at pH 3.5 showing YR Munsell color. For further evaluation of its efficacy as a new natural dye resource, effects of dyeing conditions and mordanting on dye uptake, color change, and colorfastness were investigated for silk fiber. Metasequoia cone colorant showed good affinity toward silk fiber showing YR Munsell color and maximum dye uptake was shown at pH 3.5. Post-mordanting with Cu and Fe improved dye uptake, especially Fe($C_5H_{10}FeO_6$) mordant was effective as much as 2 times higher dye uptake comparing with un-mordanted sample. The color of dyed fabrics with mordanting showed YR Munsell color. Fe mordanted fabrics appeared dark gray~black color. Colorfastness to washing was relatively good, whereas lightfastness of the dyed fabrics showed grade 2. It was confirmed that Metasequoia cone colorant can be used as a new dye resource for silk fiber getting brownish yellow to dark gray/black color depending on mordant type. In addition, it showed antimicrobial functionality.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.41 no.3
• /
• pp.59-65
• /
• 1999

This study has been performed to confirm the three dimensional effect of the crack reduction and the restrained effect of crack growth for the synthetic fiber reinforced soil. Two types of polyrpropylene fiber and low plastic clay(CL) were used for the test. And the test variable were fiber length and so on. The results of the study were summarized as follows ; 1) The mixing of synthetic fiber was effective in reducing crack growth due to adhesion between soil partlcles and synthetic fiber.l Especially initlal crack was delayed, as compared with the pure soil, for about 1 day in case of mono filament synthetic fiber and for about 1 or 2 days in case of fibrillated syntetic fiber. 2) As the content and length of synthetic fiber were increased , the effect of crack reduction was increased. It was found that 0.5% fibrillated synthetic fiber with 40mm length reinforced soil had about 3 times more effective than natural soils. 3) In case of the same fiber content and fiber length, the fibrillated synthetic fiber has nmore effective than the mono filament synthetic fiber for crack reduction.