• Proceedings of the KIEE Conference
• /
• 2001.07d
• /
• pp.1984-1986
• /
• 2001

In order to provided continuous solutions, latest developing navigation systems tend to integrate GPS receiver with INS or DR. Using the GPS carrier-phase measurements, an attitude GPS receiver with three antennas obtain the 3-dimensional attitude such as roll, pitch, and heading as well as position and velocity. With these angle measurements, in the attitude GPS/INS integrated system, attitude or gyro errors can be directly compensated. In this paper, we develop an integrated navigation system that combines attitude GPS receiver with INS. The performance of real-time integrated navigation system is determined by not only the implements of integration filter but also the synchronization of measurements. To meet these real-time requirements, the navigation software is implemented in multi-tasking structure in this paper. We also employ time-synchronization technique in the multi-sensor fusion. Experimental results show that the performance of the attitude GPS/INS integrated system is consistent even when cycle-slip occurs in carrier-phase measurements.

• Journal of Sensor Science and Technology
• /
• v.17 no.5
• /
• pp.387-395
• /
• 2008

An optic module system is developed adopting multiple colorimetry units for the measurement of multi-pad urinalysis dipsticks. Multiple photometry system instead of moving mechanisms has the advantages of system reliability and simplicity as well as economic aspects due to the recent development of economic color light emitting diodes and stable photo sensors. An integration amplifier with programmable integration time, a current source circuit with selectable and stable current settings were connected through analog multiplexers to thirty light emitting diodes for illumination and ten photo transistors for reading each strip pad. All the circuits are controlled by a microprocessor through a simple set of serial communication commands. The detect ability is eighteen times better than the minimum color difference of the test grading which is 0.013 in urobilinogen in the color space defined in this paper.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.26 no.6
• /
• pp.381-389
• /
• 2021

Most diagnosis approaches rely on historical failure data that might not be feasible in real operating conditions because the battery voltage and internal parameters are nonlinear according to various operating conditions, such as cell-to-cell configuration and initial condition. To overcome this issue, the estimator and the predictor require integrated approaches that consider comprehensive data, with the degradation process and measured data taken into account. In this paper, vector autoregressive models (VAR) with various parameters that affect overdischarge to the cell in the battery pack were constructed, and the cell-to-cell parameters were identified using an adaptive model to analyze the influence of failure prognosis. The theoretical analysis is validated using experimental results in terms of the feasibility and advantages of fault prognosis.

• Journal of Sensor Science and Technology
• /
• v.31 no.6
• /
• pp.361-365
• /
• 2022

Advanced packaging demands are driven by the need for dense integration systems. Consequently, stacked packaging technology has been proposed instead of reducing the ultra-fine patterns to secure economic feasibility. This study proposed an effective packaging process technology for semiconductor devices using a 9-inch dicing die attach film (DDAF), wherein the die attach and dicing films were combined. The process involved three steps: tape lamination, dicing, and bonding. Following the grinding of a silicon wafer, the tape lamination process was conducted, and the DDAF was arranged. Subsequently, a silicon wafer attached to the DDAF was separated into dies employing a blade dicing process with a two-step cut. Thereafter, one separated die was bonded with the other die as a substrate at 130 ℃ for 2 s under a pressure of 2 kgf and the chip was hardened at 120 ℃ for 30 min under a pressure of 10 kPa to remove air bubbles within the DAF. Finally, a curing process was conducted at 175 ℃ for 2 h at atmospheric pressure. Upon completing the manufacturing processes, external inspections, cross-sectional analyses, and thermal stability evaluations were conducted to confirm the optimality of the proposed technology for application of the DDAF. In particular, the shear strength test was evaluated to obtain an average of 9,905 Pa from 17 samples. Consequently, a 3D integration packaging process using DDAF is expected to be utilized as an advanced packaging technology with high reliability.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.157-159
• /
• 2020

This paper presents an optimal planar transformer design of a 3-kW Low voltage DC-DC Converter (LDC) with 3.68 kW/L power density for electric vehicle (xEV) application. The transformer is optimized based on the trade-off between footprint and loss using the proposed figure-of-merit (FOM) based optimization. In order to achieve ZVS under entire load range, an external leakage inductance is added and implemented using the proposed magnetic integration technique. A comparison between non-integrated and integrated magnetic core using finite element analysis (FEA) is presented. The result shows that the integrated core can reduce the core loss up to 35 % and core boxed volume up to 15 % compared to the non-integrated core. Experimental results are also provided to validate the proposed magnetic integration technique.

• Annual Conference of KIPS
• /
• 2023.11a
• /
• pp.264-267
• /
• 2023

The circular economy approach in the coffee supply chain promotes a more sustainable, environmentally friendly, and socially responsible coffee industry. It aims to reduce the environmental impact of coffee production and consumption while ensuring the long-term viability of coffee farming communities and ecosystems. However, there are many challenges in the traditional circular economy coffee supply chain. Hence, this paper undertakes a comparative analysis between the traditional circular economy coffee supply chain and its integration with blockchain. As a result, we display the benefits of incorporating blockchain technology into the conventional circular economy framework of the coffee supply chain. Additionally, this integration promises to overcome the challenges in the traditional circular economy coffee supply chain.

• The Mathematical Education
• /
• v.63 no.2
• /
• pp.233-254
• /
• 2024

This paper delves into the symbiotic integration of coding and mathematics education, aimed at cultivating computational thinking and enriching mathematical problem-solving proficiencies. We have identified a corpus of scholarly articles (n=38) disseminated within the preceding two decades, subsequently culling a portion thereof, ultimately engendering a contemplative analysis of the extant remnants. In a swiftly evolving society driven by the Fourth Industrial Revolution and the ascendancy of Artificial Intelligence (AI), understanding the synergy between these domains has become paramount. Mathematics education stands at the crossroads of this transformation, witnessing a profound influence of AI. This paper explores the evolving landscape of mathematical cognition propelled by AI, accentuating how AI empowers advanced analytical and problem-solving capabilities, particularly in the realm of big data-driven scenarios. Given this shifting paradigm, it becomes imperative to investigate and assess AI's impact on mathematics education, a pivotal endeavor in forging an education system aligned with the future. The symbiosis of AI and human cognition doesn't merely amplify AI-centric thinking but also fosters personalized cognitive processes by facilitating interaction with AI and encouraging critical contemplation of AI's algorithmic underpinnings. This necessitates a broader conception of educational tools, encompassing AI as a catalyst for mathematical cognition, transcending conventional linguistic and symbolic instruments.

• Annual Conference of KIPS
• /
• 2024.05a
• /
• pp.235-238
• /
• 2024

This paper investigates the integration of ARIA cryptography within hardware secure modules to bolster IoT security. We present a comparative analysis of two prominent IoT communication protocols, MQTT and LwM2M, augmented with ARIA cryptography. The study evaluates their performance, security, and scalability in practical IoT applications. Our experimental setup comprises FPGA-enabled hardware secure modules interfaced with Raspberry Pi acting as an MQTT and LwM2M client. We utilize the Mosquitto MQTT server and an LwM2M server deployed on AWS IoT. Through rigorous experimentation, we measure various performance metrics, including latency, throughput, and resource utilization. Additionally, security aspects are scrutinized, assessing the resilience of each protocol against common IoT security threats. Our findings highlight the efficacy of ARIA cryptography in bolstering IoT security and reveal insights into the comparative strengths and weaknesses of MQTT and LwM2M protocols. These results contribute to the development of robust and secure IoT systems, paving the way for future research in this domain.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.39 no.6
• /
• pp.505-511
• /
• 2015

Solid oxide fuel cell operate at high temperature ($800{\sim}1000^{\circ}C$). High temperature have an advantage of system efficiency, but a weak durability. In this study, linear state space controller is designed to handle the temperature of solid oxide fuel cell system for proper thermal management. System model is developed under simulink environment with Thermolib$^{(R)}$. Since the thermally optimal system integration improves efficiency, very complicated thermal integration approach is selected for system integration. It shows that temperature response of fuel cell stack and catalytic burner are operated at severe non-linearity. To control non-linear temperature response of SOFC system, gain scheduled linear quadratic regulator is designed. Results shows that the temperature response of stack and catalytic burner follows the command over whole ranges of operations.

• Proceedings of the Korea Contents Association Conference
• /
• 2007.11a
• /
• pp.857-860
• /
• 2007

Recently, Business of Hospital Computerizing by medical information system. Medical treatment information is computing. The history of a patient storing and management by medical information databases. The medical information system not standardization by each company and hospital. So a each hospital not shared information by medical information system. and this paper, proposed a design of standardization medical information database schema and transformation module for a each hospital medical information. also a proposed integration system using the Web service for reduce a time and a cost. A each other hospital medical information shared by integration system, efficiency of business.