• 대한환경공학회지
• /
• 제33권4호
• /
• pp.281-288
• /
• 2011

초음파 기술은 공동현상(cavitation)에 의한 산화분해 및 열분해 과정을 이용해 오염물질을 저감시키는 활발한 연구가 진행되고 있으나 대부분 저용량 소규모(Lab scale) 실험에 그치고 있다. 본 연구에서는 대용량 연속식 처리가 가능한 Pilot Scale의 초음파 시스템을 개발하고, 분해 대상물질로 나프탈렌을 선정하여 개발된 시스템의 처리효율을 비교 검증하였다. 전반사가 유도된 최적의 다주파 조사 조건으로 V-$120^{\circ}$ 형태가 일반형에 비해 약 1.4~2.2배 우수한 효율을 나타내었다. V-$120^{\circ}$ 초음파 조사 형태, 연속식 처리가 가능하기 위한 유입 유출수 설치, 보조제 첨가부 및 외곽 냉각 순환시스템을 적용하여 총 3가지 형태의 pilot scale(20~40 L) 반응조를 제작하였다. 세 반응조의 나프탈렌 처리 결과는 모두 EPA의 나프탈렌 음용수 권고기준을 만족하였으며, 특히, 전반사 조건이 유도된 PS1과 PS2 type이 약 97% 이상의 우수한 분해효율을 보였다. 연속식(CSTR형) 처리 방식에서도 2.5~10 mg/L의 나프탈렌을 시간당 10~20 L를 처리한 결과 약 84~96%의 우수한 분해효율을 나타내었다. 인공 현장 지하수 조건에서의 초음파 적용시 초음파 효율의 큰 차이를 보이지 않아 개발된 본 시스템의 현장 적용 가능성을 확인하였다.

• 한국산업보건학회지
• /
• 제19권4호
• /
• pp.403-411
• /
• 2009

This study was performed to propose appropriate conditions suited to the analysis of naphthalene by comparing desorption efficiencies under various conditions. 1. As to influence by adsorbing media and desorbing solvent on desorption efficiency of naphthalene, when adsorbed by CCT, o-xylene gave the highest desorption efficiency of $73.96{\pm}0.53%$ while the lowest of $1.14{\pm}0.03%$ desorbed by ether. Both XAD-2 and Chromosorb 106 showed around 90% of desorption efficiencies for each solvent, especially desorption efficiencies more than 95% were achieved when adsorbed by Chromosorb 106 and desorbed by $CS_2$ or o-xylene. 2. Desorption efficiencies descended over the storage period in any condition(p<0.05). For all three adsorbing media, while desorption efficiencies showed no significant difference(p>0.05) between room temperature and refrigeration a day of loading, samples kept in room temperature had higher desorption efficiencies than refrigerated ones in 7 and 14 days with significant difference(p<0.05).Also, desorption efficiencies dropped drastically in 7 days, from that point the decreasing tendency went mild. 3. When respective 1 TLV and 0.1 TLV of naphthalene were spiked on CCT and desorbed by CS2($46.45{\pm}0.59%$ vs. $30.15{\pm}0.81%$), o-xylene($73.96{\pm}0.53%$ vs. $67.51{\pm}1.34%$), and ether($1.14{\pm}0.03%$ vs. N.D.) desorption efficiencies increased as the amount of loading increased(p<0.05).On the other hand, naphthalene spiked on XAD-2 and Chromosorb 106 indicated no significant difference(p>0.05) in desorption efficiencies between 1 TLV and 0.1 TLV. In conclusion, in order for favorable desorption efficiencies of naphthalene it is important to select appropriate adsorbing media and desorbing solvent accordingly. The result revealed that adsorbing media of XAD-2 and Chromosorb 106 outperformed CCT and desorbing solvents of $CS_2$ and o-xylene achieved over 90% of desorption efficiencies when adsorbed on XAD-2 and Chromosorb 106. Also, considering the tendency that desorption efficiencies of naphthalene decrease with time, the samples should be analyzed as soon as possible.

• 한국섬유공학회:학술대회논문집
• /
• 한국섬유공학회 1998년도 가을 학술발표회논문집
• /
• pp.215-218
• /
• 1998

Poly(ethylene-2,6-naphthalene dicarboxylate)(PEN)의 분자구조는 주사슬내에 PET의 벤젠환 자리에 나프탈렌환으로 치환된 구조로서, 분자자체의 특성상 강직성을 가지며 PET에 비하여 고탄성률과 고융점을 가짐으로써 산업용 재료로써 주목되고 있음은 잘 알려진 사실이다. (중략)

• 해양환경안전학회지
• /
• 제17권3호
• /
• pp.191-196
• /
• 2011

넙치 치어에 대한 나프탈렌의 급성독성을 조사하기 위하여 대조구($0{\mu}g/L$), 1000, 1800, 3200, 5600, $10000{\mu}g/L$의 6개의 나프탈렌 농도구를 설정하여 24시간 동안 노출실험을 실시하고 혈액학적 성상을 분석하였다. 넙치 치어에 대한 나프탈렌의 24h-$LC_{50}$은 $3600{\mu}g/L$를 나타냈다. 넙치 치어의 핼액학적 반응에서 헤마토크리트값은 5600, $10000{\mu}g/L$의 농도구에서 대조구와 비교하여 유의하게 증가하였고, 글루코스는 $10000{\mu}g/L$의 농도 구에서 유의하게 증가 하였다(P<0.05). 삼투질 농도는 3200, 5600, $10000{\mu}g/L$의 농도구에서 유의하게 증가하였다. 반면, 이온분석 결과 [$Na^+$], [$K^+$]은 5600 및 $10000{\mu}g/L$ 나프탈렌 농도구에서 유의하게 증가하였으나 [$Cl^-$]는 큰 차이를 보이지 않았다.

• 한국지열·수열에너지학회논문집
• /
• 제3권2호
• /
• pp.1-7
• /
• 2007

This paper is concerned with the selection of proper working fluids for medium temperature range heat pipe. The heat pipe which is made of SUS 316L has a total length of 700 mm as well as an outside diameter of 27.2 mm and a thickness of 2.1 mm respectively. Working fluids used in this study were Naphthalene, Biphenyl and Dowtherm A. Their charge amounts were about 40% of the inside volume of evaporator section. Experimental results shows that the Dowtherm A is good for $200^{\circ}C{\sim}300^{\circ}C$temperature range, while the Naphthalene is proper for $300^{\circ}C{\sim}430^{\circ}C$. In the case of the Naphthalene heat pipe, the heat transfer rate reaches 1500 W along with a vapor temperature of $430^{\circ}C$.

• Environmental Engineering Research
• /
• 제12권5호
• /
• pp.211-217
• /
• 2007

Polycyclic aromatic hydrocarbon growth from cyclopentadiene (CPD) pyrolysis was investigated using a laminar flow reactor operating in a temperature range of 600 to $950^{\circ}c$. Major products from CPD pyrolysis are benzene, indene and naphthalene. Formation of observed products from CPD is explained as follows. Addition of the cyclopentadienyl radical to a CPD $\pi$-bond produces a resonance-stabilized radical, which further reacts by one of three unimolecular channels: intramolecular addition, C-H bond $\beta$-scission, or C-C bond $\beta$-scission. The intramolecular addition pathway produces a 7-norbornenyl radical, which then decomposes to indene. Decomposition by C-H bond $\beta$-scission produces a biaryl intermediate, which then undergoes a ring fusion sequence that has been proposed for dihydrofulvalene-to-naphthalene conversion. In this study, we propose C-C bond $\beta$-scission pathway as an alternative reaction channel to naphthalene from CPD. As preliminary computational analysis, Parametric Method 3 (PM3) molecular calculation suggests that intramolecular addition to form indene is favored at low temperatures and C-C bond $\beta$-scission leading to naphthalene is predominant at high temperatures.

• Bulletin of the Korean Chemical Society
• /
• 제34권12호
• /
• pp.3829-3834
• /
• 2013

$H{\beta}$ (core)/SAPO-11 (shell) composite molecular sieve was synthesized by the hydrothermal method in order to combine the advantages of $H{\beta}$ and SAPO-11 for the methylation of naphthalene with methanol. For comparison, the mechanical mixture was prepared through the blending of $H{\beta}$ and SAPO-11. The physicochemical properties of $H{\beta}$, SAPO-11, the composite and the mechanical mixture were characterized by various characterization methods. The characterization results indicated that $H{\beta}$/SAPO-11 composite molecular sieve exhibited a core-shell structure, with the $H{\beta}$ phase as the core and the SAPO-11 phase as the shell. The pore diameter of the composite was between that of $H{\beta}$ and SAPO-11. The composite had fewer acid sites than $H{\beta}$ and mechanical mixture while more acid sites than SAPO-11. The experimental results indicated that the composite exhibited high catalytic performances for the methylation of naphthalene with methanol.

• 한국환경과학회지
• /
• 제12권8호
• /
• pp.871-879
• /
• 2003

The complexation of co-contaminant mixtures between Ag(I) and polycyclic aromatic hydrocarbon (PAH) molecules (naphthalene, pyrene, and perylene) were investigated to quantify the equilibrium constants of their complexes and elucidate the interactions between Ag(I) and PAH molecules. The apparent solubilities of PAHs in aqueous solutions increased with increasing Ag(I) ion concentration. The values, K$_1$ and K$_2$ of equilibrium constants of complexes of Ag(I)-PAHs, were 2.990 and 0.378, 3.615 and 1.261, and 4.034 and 1.255, for naphthalene, pyrene, and perylene, respectively, The K$_1$and K$_2$ values of PAHs for Ag(I) increased in the order of naphthalene ＜ pyrene ＜ perylene and naphthalene ＜ pyrene ≒ perylene, respectively, indicating that a larger size of PAH molecule is likely to have more a richer concentration of electrons on the plane surfaces which can lead to stronger complexes with the Ag(I) ion. For the species of Ag(I)-PAH complexes, a 1:1 Ag(I) : the aromatic complex, AgAr$\^$＋/, was found to be a predominant species over a 2:1 Ag(I) : aromatic complex, Ag$_2$Ar$\^$＋＋/. The PAH molecules with four or more aromatic rings and/or bay regions were observed to have slightly less affinity with the Ag(I) ion than expected, which might result from inhibiting forces such as the spread of aromatic $\pi$ electrons over o wide molecular surface area and the intermolecular electronic repulsion in bay regions.

• 한국응용과학기술학회지
• /
• 제26권3호
• /
• pp.317-327
• /
• 2009

In this study DMT(Dimethylterephthalate), NDC(Dimethyl-2, 6-Naphthalene Dicarboxylate) were used to synthesize polyester polyol which shows enhanced storage stability, improved flame retardancy, and good compressive strength. If DMT and NDC react respectively with DEG(Diethylene Glycol) which is kind of linear diol, the obtained polyester polyols tend to crystallize easily after the reaction. In case of DMT, PA(Phthalic Anhydride) which has asymmetric structure was introduced to retard the crystallization. In case of NDC, DPG(Dipropylene Glycol) which has an methyl side chain was introduced to prevent the crystallization. It was found that to introduce DPG was much more effective method to prevent the crystallization than PA. NDC and DMT were reacted together with DPG for various compositions of NDC:DMT(8:2, 6:4, 4:6 mol ratio). The obtained NDC-DMT-DPG based polyester polyol showed improved flame retardancy, and good compressive strength with increasing the content of NDC.

• 생명과학회지
• /
• 제9권1호
• /
• pp.84-91
• /
• 1999

폐기름 유출지역에서 분리 동정된 미생물 Xl, X2, X3은 폐유나 그 주성분인 난분해성 물질들을 유일 탄소원으로 자랄 수 있었다. Naphthalene과 2-methyl naphthalene은 7일만에 약 80$\%$ 분해되었다. Hexane과 hexadecane은 거의 대부분 분해되며 60$\%$의 분해가 폐유에서 관찰되었다. 합성 계면활성제인 Triton X-100와 Tween 20은 세포의 성장과 분해에 오히려 저해함을 보였다. Xl, X2은 그람 음성을 X3은 그람 양성을 보이며 항생제 ampicillin에 저항성을 가진다. Xl의 30kb plasmid을 E.coli에 transform하여 유전공학적 활용 가능성을 보였다.