• 제목/요약/키워드: nanoparticulate

검색결과 38건 처리시간 0.022초

기체분리용 세라믹 복합분리막의 개발: II. 극미세 입자 $TiO_2$ 졸의 제조 및 코팅 특성 (Development of Ceramic Composite Membranes for Gas Separation: II. Preparation and Coating Characteristics of Nanoparticulate $TiO_2$ Sols)

  • 현상훈;박준수;최세영
    • 한국세라믹학회지
    • /
    • 제29권9호
    • /
    • pp.739-749
    • /
    • 1992
  • The sols prepared by dialyzing solutions, in which the hydrolyzed precipitates of TEOT or directly Ti(OC3H7)4 were resolved, were the nanoparticulate sol with the average particle size less than 7 nm and the anatase crystal phase. In the pH range of 1.5 to 2.9, the particle size of the nanoparticulate TiO2 sols (0.09 mol/ι) increased gradually upto 15 nm~26nm with the increase of pH in the initial aging state but the sols were transparent all the time, and stable without growin any more after 30 days. When the slipcasted porous alumina tubes were coated by the sol-gel dipping method, the minimum particle size and the aging time for forming the coated gel layer at the given pH were optimized. For obtaining the very thin crack-free and reproducible membrane coating, the use of a nanoparticulate TiO2 sol (0.09 mol/ι) aged for about 30 dyas at pH=2.0 was found to be the best.

  • PDF

기체분리용 세라믹 복합분리막의 개발: I. 극미세 입자 실리카 졸의 코팅 특성 (Development of Ceramic Composite Membranes for Gas Separation: I. Coating Characteristics of Nanoparticulate SiO2 Sols)

  • 현상훈;;윤성필
    • 한국세라믹학회지
    • /
    • 제29권6호
    • /
    • pp.496-504
    • /
    • 1992
  • Alumina tubes suitable for the support of gas separation membranes have been prepared by the slipcasting technique. These supports have the average pore size of 0.1 ${\mu}{\textrm}{m}$ within the narrow distribution. The sol-gel dipcoating process of nanoparticulate sols is very sensitive to microstructure of the support, and the coating on the inside surface of the tube is found to be more successful than on the outside surface. Nanoparticulate silica sols (0.82 mol/ι) have been synthesized by an interfacial hydrolysis reaction between TEOS and high alkaline water. When coating an alumina tube with these sols, the minimum limits of the particle size and the aging time required for forming the coated gel layer at the given pH are provided. It is optimum to coat the support with less concentrated sols stabilized through aging for the appropriate time (more than 22 days) at the lower pH (pH 2.0) for producing a reproducible crack free thin film coating in composite membranes.

  • PDF

Effects of nanoparticulate saponin-platinum conjugates on 2,4-dinitrofluorobenzene-induced macrophage inflammatory protein-2 gene expression via reactive oxygen species production in RAW 264.7 cells

  • Kim, Young-Jin;Kim, Dong-Bum;Lee, Young-Hee;Choi, Soo-Young;Park, Jin-Seu;Lee, Seung-Yong;Park, Joon-Won;Kwon, Hyung-Joo
    • BMB Reports
    • /
    • 제42권5호
    • /
    • pp.304-309
    • /
    • 2009
  • Nanoparticulate platinum (II) (nano Pt) is a powerful antioxidant that is widely used to scavenge reactive oxygen species (ROS). The antioxidant activity of nano Pt has gained attention as a potentially useful therapeutic for a variety of diseases including cancer and aging. In the present study, we prepared nanoparticulate saponin-Pt (II) (nano saponin-Pt) conjugates using the ethanol reduction method to enhance the permeability and retention effect of Pt. The nano saponin-Pt conjugates were found to restore the viability of approximately 40% of 2,4-dinitrofluorobenzene (DNFB)-treated RAW 264.7 cells. In addition, we found that nano saponin-Pt conjugates acted as a potent antioxidant that reduced the production of ROS and inhibited activation of the MAP kinase pathway and MIP-2 gene expression in response to DNFB. These results provide insight into the potential usefulness of nano saponin-Pt conjugates as a treatment for contact hypersensitivity.

기체분리용 세라믹 복합분리막의 개발 : V. 가압 졸-겔 코팅법에 의한 rrmaltp입자 실리카 막의 합성 (Development of Ceramic Composite Membranes for Gas Separation: V. Synthesis of Nanoparticulate Silica Membranes by the Pressurized Sol-Gel Coating Technique)

  • 현상훈;윤성필;김준학
    • 한국세라믹학회지
    • /
    • 제30권3호
    • /
    • pp.189-198
    • /
    • 1993
  • A new pressurized sol-gel coating technique forming membrane layers inside pores of the porous support by the simple operation has been developed. Crack-free and reproducible nanoparticulate silica membranes supported on the porous $\alpha$-alumina tube are synthesized by pressurized coating at 600kPa for 2hr. The pore radius and N2 gas permiability at the room temperature of silica membrane layers are 8$\AA$ and 7.0$\times$10-7mol/$m^2$.s.Pa, respectively. The mechanism of N2 gas transfer through synthesized membrane layers is the perfect Knudeen flow, and the thermal stability of the silica composite membranes is excellent upto 40$0^{\circ}C$.

  • PDF

酸化鐵産業의 開發動向 (An update technology trend in iron oxide)

  • 손진군
    • 자원리싸이클링
    • /
    • 제13권6호
    • /
    • pp.3-8
    • /
    • 2004
  • 산화철의 국제동향에 대하여 각 지역간의 수출입동향과 최근에 급속하게 성장하고 잇는 중국의 산화철업계 동향에 대하여 소개하였다. 특히 세계 산화철 교역량은 산화철업계의 기술발전과 각국이 처한 환경에 따라 변화하며, 산화철의 주요용도중 하나인 안료용도의 경우 건축경기에 큰 영향을 받는다. 중국의 산화철업계는 전반적으로 크게 성장한 반면 다국적 기업의 진출에 따른 기술력 향상과 반대급부로 경쟁력 약한 중국내 기업정리등이 수반되었다. 산화철산업의 발전을 위하여는 타소재와의 가격경쟁력도 중요하지만 새로운 응용분야의 개척이 필요하다. 본 기술자료에서는 최근에 관심이 집중되는 산화철 나노분말의 신용도 및 특성에 대하여 소개하였다.

유효계면 모델과 균질화 기법을 이용한 나노입자 복합재의 역학적 물성 예측에 관한 연구 (A study on the prediction of the mechanical properties of nanoparticulate composites using homogenization method with effect interface concept)

  • 장성민;양승화;유수영;조맹효
    • 대한기계학회:학술대회논문집
    • /
    • 대한기계학회 2008년도 추계학술대회A
    • /
    • pp.684-689
    • /
    • 2008
  • In this study, homogenization method combined with the effective interface model for the characterization of properties of the nanoparticulate composites is developed. In order to characterize particle size effect of nanocomposites, effective interface model has been developed. The application range of analytical micromechanics approach is limited because a simple analytical approach is valid only for simple and uniform geometry of fiber particles. Therefore this study focuses on the analysis of mechanical properties of the effect interface through the continuum homogenization method instead of using analytical micromechanics approach. Using the homogenization method, elastic stiffness properties of the effective interface are numerically evaluated and compared with the analytically obtained micromechanics solutions. The suggested homogenization method is expected to be applied to optimization problems for nanocomposite design.

  • PDF

All printed organic thin film transistors with high-resolution patterned Ag nanoparticulate electrode using non-relief pattern lithography

  • Eom, You-Hyun;Park, Sung-Kyu;Kim, Yong-Hoon;Kang, Jung-Won;Han, Jeong-In
    • 한국정보디스플레이학회:학술대회논문집
    • /
    • 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
    • /
    • pp.568-570
    • /
    • 2009
  • Octadecyltrichlorosilane (OTS) self-assembled monolayer was selectively patterned by deep ultraviolet exposure, resulting in differential surface state, hydrophilic area with OTS hydrophobic surroundings. High-resolution (<10 ${\mu}m$) nanoparticulate Ag electrodes and organic semiconductors were patterned from simple dip-casting and ink-jetting on the pre-patterned hydrophilic surface, forming all solution-processed organic thin film transistors. The devices typically have shown a mobility of 0.065 $cm^2/V{\cdot}s$ and on-off current ratio of $8{\times}10^5$.

  • PDF

Local nanofiller volume concentration effect on elastic properties of polymer nanocomposites

  • Shin, Hyunseong;Han, Jin-Gyu;Chang, Seongmin;Cho, Maenghyo
    • Multiscale and Multiphysics Mechanics
    • /
    • 제1권1호
    • /
    • pp.65-76
    • /
    • 2016
  • In this study, an influence of local variation of nanoparticulate volume fraction on the homogenized elastic properties is investigated. It is well known that interface effect is dependent on the radius and volume fraction of reinforced nanofillers. However, there is no study on the multiscale modeling and analysis of polymer nanocomposites including polydispersed nanoparticles with consideration of interphase zone, which is dependent on the volume fraction of corresponding nanoparticles. As results of numerical examples, it is confirmed that an influence of local variation of nanoparticulate volume fraction should be considered for non-dilute system such as cluster of nanoparticles. Therefore representative volume element analysis is conducted by considering local variation of nanoparticle volume fraction in order to analyze the practical size of cell including hundreds of nanoparticles. It is expected that this study could be extended to the multiparticulate nanocomposite systems including polydispersed nanoparticles.