• Air Cleaning Technology
• /
• v.26 no.4
• /
• pp.1-7
• /
• 2013

• Membrane Journal
• /
• v.22 no.4
• /
• pp.251-257
• /
• 2012

For the separation and recovery of n-pentane from nitrogen environment, the poly (dimethyl siloxane) (PDMS) composite membranes supported by polyetherimide (PEI) hollow fiber membranes were prepared. To characterize the gas separation properties of the resulting membranes, the permeance of n-pentane and nitrogen, concentrations of permeate and retentate, and recovery ratio were measured for n-pentane and nitrogen mixtures. The permeance of n-pentane and nitrogen, 2485.3 and 9.9 GPU, were observed respectively. As the stage cut decreases and the feed concentration increases, the n-pentane concentration in permeate tends to increase. In the meanwhile, the recovery efficiency tends to increase as the stage cut increases and the feed concentration decreases.

• Journal of Adhesion and Interface
• /
• v.14 no.2
• /
• pp.75-81
• /
• 2013

Epoxy matrix based composites were fabricated by adding SiC nano fillers. The interfacial properties of composites were varied with different shapes of SiC nano fillers. To investigate the shape effects on the interfacial properties, beta and whisker type SiC nano fillers were used for this evaluation. The dispersion states of nano SiC-epoxy nanocomposites were evaluated by capacitance measurements. FE-SEM was used to observe the fracture surface of different structures of SiC-epoxy nanocomposites and to investigate for reinforcement effect. Interfacial properties between carbon fiber and SiC-epoxy nanocomposites were also evaluated by ILSS (interlaminar shear strength) and IFSS (interfacial shear strength) tests. The interfacial adhesion of beta type nanocomposites was better than whisker type.

• Journal of the Korean Ceramic Society
• /
• v.42 no.12 s.283
• /
• pp.842-845
• /
• 2005

Glass composites containing ceramic fiber have been developed for Solid Oxide Fuel Cell (SOFC) seals. Effect of glass type, loading pressure and thermal cycle the leak rates of composite seals was investigated. Seal performance of two commercial glasses was compared with that of $SiO_2BaO-B_2O_3$ glass synthesized in this work. The leak rate for seals made of pyrex(R) increases from $\~0.0005\;to\;\~0.004sccm/cm$ as the gas pressure increases from 10 to 50 kPa. The soda lime silicate glass seal shows the leak rate two times higher than the one made of pyrex(R) or $SiO_2BaO-B_2O_3$ glass. The viscosity of glass at the seal test temperature is presumed to affect the leak rate of the glass seal. As the applied loading pressure increases from 0.4 to 0.8 MPa at $750^{\circ}C$, the leak rate decreases from 0.038 to 0.024 sccm/cm for composite seals. It has been found that during 50 thermal cycles between $450^{\circ}C\;to\;700^{\circ}C$ leak rates remained almost constant, ranging from 0.025 to 0.03sccm/cm. The results showed an excellent thermal cycle stability as well as sealability of the glass matrix ceramic fiber composite seals.

• Membrane and Water Treatment
• /
• v.10 no.4
• /
• pp.287-298
• /
• 2019

Lotus leaf has a special dual micro and nano surface structure which gives its highly hydrophobic surface characteristics and so-called self cleaning effect. In order to endow PVDF hollow fiber membrane with this special structure and improve the hydrophobicity of membrane surface, PVDF hollow fiber composite membranes was obtained through the immersion coating of poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) dilute solution on the outside surface of PVDF support membrane. The prepared PVDF composite membranes were used in the vacuum membrane distillation (VMD) for the desalination. The effects of PVDF-HFP dilute solution concentration in the dope solution and coating time on VMD separation performance was studied. Membranes were characterized by SEM, WCA measurement, porosity, and liquid entry pressure of water. VMD test was carried out using $35g{\cdot}L^{-1}$ NaCl aqueous solution as the feed solution at feed temperature of $30^{\circ}C$ and the permeate pressure of 31.3 kPa. The vapour flux reached a maximum when PVDF-HFP concentration in the dilute solution was 5 wt% and the coating time was kept in the range of 10-60 s. This was attributed to the well configuration of micro-nano rods which was similar with the dual micro-nano structure on the lotus leaf. Compared with the original PVDF membrane, the salt rejection can be well maintained which was greater than 99.99 % meanwhile permeation water conductivity was kept at a low value of $7-9{\mu}S{\cdot}cm^{-1}$ during the continuous testing for 360 h.

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.04a
• /
• pp.143-145
• /
• 2003

전기방사에 의해 제조되는 나노 파이버웹은 섬유가 매우 가늘고, 기공이 미세하며 비표면적이 매우 커서 필터 및 전극재료에 적합한 산업용 소재이다. 나노 웹의 구조는 방사 용액의 농도, 방사 온도, 압력, 전압등 여러 변수들에 의해 영향을 받으며, 이 변수들의 구조에 미치는 영향들이 이론적, 실험적으로 많이 연구, 보고되어 있다 [1]. 그러나, 공정의 분석 및 제어에 대한 연구는 매우 드물며, 특히 대량 생산하에서의 품질 관리 시스템에 대한 연구는 전무한 실정이다. (중략)

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.321-322
• /
• 2007

See Full Text

• Proceedings of the Korean Fiber Society Conference
• /
• 2007.11a
• /
• pp.225-226
• /
• 2007

• Proceedings of the Korean Fiber Society Conference
• /
• 2003.10b
• /
• pp.273-274
• /
• 2003

Chitin and chitosan have a wide range of application on the environmental and biomedical engineering by their biocompatibility, biodegradability, non-toxicity and adsorption property, etc. The efforts of manufacturing chitosan fibers are continuously maintained until now$\^$l.2)/. Electrospinning is new method to produce the nano-sized fibers for medical uses. Recently, formation of chitosan fiber using electrospinning is studied by many textile researchers. (omitted)

• Proceedings of the Korean Fiber Society Conference
• /
• 2001.10a
• /
• pp.345-347
• /
• 2001

전기방사(Electro-spinning)는 기존의 방사방법과는 달리 전기장의 힘을 이용하여 방사하는 방법으로 고분자용액의 적용범위가 넓고, 저렴하고 간단한 공정을 통하여, 나노크기의 섬유를 제조할 수 있는 장점이 있다. 목재 펄프를 아민옥시드계 용제의 하나인 NMMO(N-methyl-morpholine-N-oxide)에 용해시켜 습식 방사를 통하여 섬유를 제조한다. (중략)