Cotton fabric was treated with montmorillonite (MMT) so as to evaluate its effectiveness on improving its wrinkle resistance. The MMT in emulsion form was applied to cotton fabric by padding and finally the wrinkle resistance of the MMT-treated cotton fabric was improved. Furthermore, instrumental methods were used for studying the presence of MMT particles on the cotton fabric surface. It was noted that nano-scale MMT particles adhered on the fiber surface and the particle size played an important role in influencing the wrinkle resistance of the cotton fabric. The experimental results are discussed thoroughly in this paper.
본 연구에서는 몬모릴로나이트(montmorillonite, MMT)의 오존처리가 몬모릴로나이트의 표면특성과 폴리프로필렌(polypropylene, PP) 나노복합재료의 열안정성에 미치는 영향에 대하여 살펴보았다. MMT의 표면 특성은 XRD, FT-IR 그리고 XPS를 통해 관찰하였고, 나노복합재료의 열안정성은 열중량 분석기(TGA)를 이용하여 조사하였다 실험 결과, 실리케이트의 층간 간격은 유기적으로 개질된 MMT(D-MMT)가 개질되지 않은 MMT에 비해 약 11${\AA}$ 증가한 것을 알 수 있었고, FT-IR 결과로부터 D-MMT의 경우 $2800\~2900\;cm^{-1}$ 부근에서 $CH_2$의 피크가 형성된 것을 확인할 수 있었다. 또한 오존처리는 MMT 표면에 Si-O와 $SiO_2$ 관능기를 증가시켰는데, 이는 산소를 포함하는 관능기들이 발달하기 때문으로 판단된다. 오존처리된 MMT가 도입된 나노복합재료에서 열안정성이 증가하는 것을 확인할 수 있었으며, 이는 PP와 MMT 사이의 산-염기 계면 상호작용으로부터 계면 결합력이 향상되었기 때문으로 판단된다.
서로 다른 종류의 유기 개질제가 층간에 삽입된 세 종류의 몬모릴로나이트 (MMT)를 사용하여 불포화 폴리에스터 (UP)/MMT 나노복합체를 제조하고 유기 개질제의 화학적 구조와 각 성분들의 최종 혼합시간이 최종 나노복합체의 형태구조와 각종 물리적 특성에 미치는 영향을 조사하였다. 최종 혼합 시간은 MMT의 종류에 관계없이 나노복합체의 형태구조와 각종 물성에 별다른 영향을 미치지 못하는 것으로 확인되었으며, MMT의 유기 개질제에 두 개의 수산화기가 포함된 Cloisite 30B의 경우에는 나머지 두 종류의 MMT에 비해 형태구조나 고무 평탄 영역에서의 전단 모듈러스 및 굴곡강도 등은 우수한 것으로 나타났다 하지만 인장 강도나 열분해 거동, 유리 전이 온도 등은 별다른 차이를 보이지 않았으며, 또한 MMT의 함량에 따른 각종 특성의 선형적인 증가도 관찰되지 않았다.
A new composition of paper coating adhesives was prepared by using a nano-filler of an organically-modified montmorillonite (O-MMT). The new O-MMT coating adhesives were applied to the paper, and the properties of coated papers including surface morphology, optical and physical properties, and printing properties were investigated. The use of O-MMT improved the mechanical properties, such as folding endurance, tearing strength, and tensile strength, while the surface smoothness decreased. It decreased especially when the dosage was high enough, approximately above 6 parts. The printing properties such as wet- and dry-pick were enhanced with addition of O-MMT.
Polydimethylsiloxane(PDMS) macroinitiator를 이용하여 N-isopropylacrylamide(NIPAAm)와 [3- (methacryloylamino)propyl]trimethyl ammonium montmorillonite(MAPTAC-MMT)를 중합하여 주사슬에 PDMS 블록을 가지며 nano clay(montmorillonite)를 가진 PNIPAAm 중합체를 합성하여 FT-IR과 XRD를 이용하여 확인하고 DSC를 이용하여 열적 성질을 조사하였으며 중합체의 온도에 따른 수팽윤도를 구하였다. DSC 측정 결과 poly(NIPAAm-b-PDMS) 속의 PNIPAAm과 PDMS는 분리된 상으로 존재했으며, 소수성인 PDMS의 함량이 증가함에 따라 수팽윤도는 감소하였으나 LCST 값은 큰 변화가 없었다. 또한, PNIPAAm의 유리전이온도 ($T_g$)는 분리된 상으로 인해 큰 변화가 없었다. 또한, 나노입자의 첨가는 전반적으로 수팽윤도에는 영향을 주지 않았으나 중합체의 $T_g$의 값은 감소하였다.
폴리머 복합체는 우수한 강도와 내구성으로 건설현장에서 프리캐스트 부재 및 보수, 보강재로서 널리 쓰이고 있어 폴리머 복합체의 경제성 및 성능 향상에 관한 연구가 이루어지고 있다. 폴리머 나노 복합체는 나노미터 수준의 크기를 가진 Clay 등의 무기 물질을 나노분산 상으로 폴리머에 균일 혼합시킨 것으로 산업적 응용가능성 면에서 뿐만 아니라 재료 및 공학분야에서도 많은 관심을 가지고 있다. 그리고 기존의 복합체 보다 1/10 혹은 그 이상의 낮은 함량의 분산상만으로도 더 우수한 강도와 역학적 특성 및 열안정성을 나타낸다. 본 실험에서는 폴리머 복합체의 성능을 향상시키고자 유기화된 몬모릴로나이트(MMT)와 유기화 되지 않은 몬모릴로나이트(MMT)를 사용하여 박리된 MMT-UP 나노 복합체를 제조하였다. XRD와 TEM실험결과, Cloisite 30B-UP 나노 복합체에서 층과 층 사이가 $100{\AA}$ 이상 떨어져 단일층으로 분산되었기 때문에 박리가 되었음을 알 수 있었다. 또한 역학적 특성은 기존복합체보다 인장강도와 인장탄성계수을 비교하였을 때 매우 향상됨을 알 수 있었고 열적 특성도 기존복합체보다 우수한 함을 나타내었다. 박리정도가 우수한 MMT-UP 복합체로 제조한 폴리머 콘크리트에서도 순수한 UP를 사용한 것보다 역학적 특성이 두드러졌다. 또한 폴리머 콘크리트의 강도와 탄성계수는 MMT-UP 복합체의 인장강도 및 인장탄성계수와 상관성을 갖는 것으로 판단된다.
Recently, polymer-clay hybrid materials have received considerable attention from both a fundamental research and application point of view. This organ-inorganic hybrid, which contains a nanoscale dispersion of the layered silicates, is a material with greatly improved thermal and mechanical characteristics. Two classes of nanocomposites were synthesized using an unsaturated polyester resin as the matrix and sodium montmorillonite as well as an organically modified montmorillonite as the reinforcing agents. X -ray diffraction pattern of the composites showed that the interlayer spacing of the modified montmorillonite were exfoliated in polymer matrix. The mechanical properties also supported these findings, since in general, tensile strength, modulus with modified montmorillonite were higher than the corresponding properties of the composites with unmodified montmorillonite. Adding organically modified clay improved the tensile strength of unsaturated polyester by $22\%$ and the tensile modulus of unsaturated polyester was also improved by $34\%$.
본 연구에서는 폴리락틱산(PLA)의 용융강도를 향상시키기 위하여 몬모릴로나이트(MMT), 기능성 단량체인 글리시딜 메타크릴레이트(GMA)와 반응개시제를 함유한 PLA를 이축압출기로 개질한 후 열적 특성과 및 유변학적 특성을 조사하였으며, X선 회절장치(XRD) 및 투과전자현미경(TEM) 사진을 이용하여 MMT의 분산도를 측정하였다. 이 나노복합체의 $T_g$는 GMA 함량이 증가하면 감소하는 경향을 보였으나, MMT의 양에는 크게 영향을 받지 않았다. 또한 표면분석에 의해 MMT의 양이 증가할수록 박리형(exfoliation) 보다는 삽입형(intercalation)에 가까운 나노복합체가 형성된 것을 확인하였다. 복합점도 및 저장탄성률은 MMT의 첨가에 의해 크게 증가되었다.
[ $Na^+-Montmorillonite(MMT)$ ], 실리카, 탄산칼슘 및 MMT를 표면 개질한 무기 나노입자를 이용한 나노복합재료를 제조하고 이들의 열적 특성을 고찰하였다. 나노복합재료의 연속상 폴리우레탄의 분자량은 $20000{\sim}28000$이고 충전비에 큰 영향이 없었으며, 이들의 분자량 분포는 $1.5{\sim}2.0$로 비교적 일정하였다. 나노복합재료의 층간거리(d-spacing)는 순수한 충전제의 층간거리보다 모두 증가되었다. 한편 초기 열분해 온도는 폴리우레탄 매트릭스보다 모두 높게 나타났으며, 나노복합재료의 초기 열분해 온도는 $250{\sim}280^{\circ}C$ 이었다. 또한 열중량 감소 폭도 나노복합재료의 경우가 낮았으며, 완전 열분해 온도는 약 $50^{\circ}C$ 높게 나타났다. 인장강도는 탄산칼슘 충전 복합재료가 가장 높았으며, 신율은 MMT 충전 나노 복합재료가 247%로 가장 크게 나타났다. 또한 충전제의 함량이 증가할수록 인장강도는 증가하였으며 실리카 충전 복합 재료의 인장강도가 가장 낮게 나타났고, 탄산칼슘 충전 복합재료의 인장강도가 가장 높게 나타났다.
The cetyltrimethyl ammonium bromide (CTAB)-modified montmorillonite (MMT) was synthesized via a novel "dissolution and reassembly" method. To determine the optimal formula, the adsorption of C.I. Reactive Red 2 (X3B) with CTAB/MMT was investigated. The optimal CTAB/MMT nanocomposite was used to remove 2,6-dichlorophenol and p-nitrophenol from aqueous solutions. The adsorption results can be described by Langmuir isotherm, and the adsorption capacities were 200 mg/g and 125 mg/g for 2,6-dichlorophenol and p-nitrophenol, respectively. To realize the quick separation and recycle, the magnetic CTAB/MMT was further strategized and synthesized. The adsorption equilibrium time was 15 min for both contaminants; the ions' strength showed a little bit of influence on the adsorption performance. In addition, compared with acidic condition, neutral condition was more beneficial to the adsorption reaction. Due to the addition of $Fe_3O_4$, the adsorption capacities of this magnetic nanocomposite for 2,6-dichlorophenol and p-nitrophenol were a little bit decreased, which were 170 mg/g and 91 mg/g, respectively. However, the magnetic nanocomposite can be separated within 30 s under an external magnetic field, which would be useful in the practical application.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.