• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 The 6th International Symposium of East Asian Resources Recycling Technology
• /
• pp.84-87
• /
• 2001

A demand for the aggregates is increasing in the field of civil and architectural industry and so on. In these industries, the particle size and shape of aggregates are important factors and especially spherical or rounded particles are desired. In Japan, waste glass is used as one of the aggregate materials for the pavement or the construction. In this study based on the frictional action of material on each other, an autogenous grinding of silica glass with a stirred mill were carried out in order to eliminate flakelike or squarish particles and get spherical or rounded ones for aggregate materials. The autogenous grinding experiments were conducted by applying loads to the particle layer of silica glass. The particle shape was evaluated by the shape index, N/T and the degree of circularity, Ψ$_{ci}$ . The unfractured particles (20~13mm) were evaluated by N/T and Ψ$_{ci}$ , and the products (finer than 10${\mu}{\textrm}{m}$) by Ψ$_{ci}$ . As a result, N/T of the unfractured particles decreased with an increase of grinding time. Ψ$_{ci}$ of the unfractured particles and the products increased with an increase of grinding time (; progress of grinding), and became almost constant in the long time grinding. These tendencies were not changed by the applied load on the particle layer, but the limit value of Ψ$_{ci}$ at the products were varied with the applied load.plied load.

• 한국대기환경학회지
• /
• 제11권1호
• /
• pp.37-44
• /
• 1995

Concentration of particulate nitrate classified by formation mechanism and particle diameter in ambient air was determined from Feb. to Oct. 1993. Sampling was carried out using a two-stage Andersen air sampler at the top of a five-story building located at Kon-Kuk University in seoul. Concentration of N $H_{4}$N $O_{3}$ in TSP was measured by pyrolysis of sample filters at 160.deg.C for 1hr. concentration of N $H_{4}$N $O_{3}$ was higher in winter time compared with that in summmer time. Also, concentration of N $H_{4}$N $O_{3}$ was higher in fine particles compared with that in coarse particle. The range of N $H_{4}$N $O_{3}$ concentration was between 2.9 and 9.9.mu.g/ $m^{3}$. Weight fraction of N $H_{4}$N $O_{3}$ in total particulate nitrate was 31.1 .sim. 59.5%, and weight fraction of N $H_{4}$N $O_{3}$ in TSP was 2.1 .sim. 11.2%. Concentration of NaN $O_{3}$, which originated from sea salt, was highest in spring time and lowest in summer time,and the concentration range was between 0.1 and 0.7.mu.g/ $m^{3}$. NaN $O_{3}$/TSP ratio was very low (0.1 .sim. 0.4%) indicating that the portion of NaN $O_{3}$in TSP was negligible. Concentration of particulate nitrate originated from soil was 2.4 .sim. 2.9.mu.g/ $m^{3}$. Weight fraction of that in total particulate nitrate was 14.0 .sim. 37.1%.

• 대기
• /
• 제26권2호
• /
• pp.243-256
• /
• 2016

Total number concentration of aerosols larger than 10 nm ($N_{CN10}$), 3 nm ($N_{CN3}$), and cloud condensation nuclei ($N_{CCN}$) were measured during four different ship cruises over the Yellow Sea. Average values of $N_{CN10}$ and $N_{CCN}$ at 0.6% supersaturation were 6914 and $3353cm^{-3}$, respectively, and the minimum value of $N_{CN10}$ was $2000cm^{-3}$, suggesting significant anthropogenic influence even at relatively clean marine environment. Although $N_{CN10}$ and $N_{CN3}$ increased near the coast due to anthropogenic influence, $N_{CCN}$ was relatively constant and therefore $N_{CCN}/N_{CN10}$ ratio tended to decrease, suggesting that coastal aerosols were relatively less hygroscopic. In general $N_{CN10}$, $N_{CN3}$, and $N_{CCN}$ during the cruises seemed to be significantly influenced by wet scavenging effects (e.g. fog) and boundary layer height variation. Only one new particle formation (NPF) event was observed during the measurement period. Interestingly, the NPF event occurred during a dust storm event and spatial scale of the NPF event was estimated to be larger than 100 km. These results demonstrate that aerosol and CCN concentration over the Yellow Sea can vary due to various different factors.

• 한국분말재료학회지
• /
• 제20권1호
• /
• pp.24-32
• /
• 2013

The effect of carrier gases (He, $N_2$) on the properties of Ti coating layers were investigated to manufacture high-density Ti coating layers. Cold spray coating layers manufactured using He gas had denser and more homogenous structures than those using $N_2$ gas. The He gas coating layers showed porosity value of 0.02% and hardness value of Hv 229.1, indicating more excellent properties than the porosity and hardness of $N_2$ gas coating layers. Bond strengths were examined, and coating layers manufactured using He recorded a value of 74.3 MPa; those manufactured using $N_2$ gas had a value of 64.6 MPa. The aforementioned results were associated with the fact that, when coating layers were manufactured using He gas, the powder could be easily deposited because of its high particle impact velocity. When Ti coating layers were manufactured by the cold spray process, He carrier gas was more suitable than $N_2$ gas for manufacturing excellent coating layers.

• 한국생물공학회:학술대회논문집
• /
• 한국생물공학회 2002년도 생물공학의 동향 (X)
• /
• pp.68-71
• /
• 2002

SPAD공법은 탈질을 위한 전자공여체로 입자상의 황과 소량의 메탄올을 이용하는 생물학적 공법이다. 이번 연구에서 SPAD공법은 특정 폐수에의 적용가능성을 평가하기 위해 고농도의 칼슘이온을 함유한 울산의 S특수강 폐수(200-300$NO_3\;^-$ -N/L)에 적용되었다. 운전기간은 2001년 11월부터 2002년 3월 초까지였으며 반응조 내부의 온도는 약 $20^{\circ}C$ 부근으로 유지되었고, 그러한 낮은 온도조건하에서도 탈질 효율은 90%이상으로 유지되었으며 유출수 농도는 약 20mg $NO_3\;^-$ -N/L정도로 유지되었다. 따라서 SPAD공법은 고농도의 칼슘이온을 함유한 폐수에 대해 적용이 가능한 것으로 사료되어진다.

• Fibers and Polymers
• /
• 제3권3호
• /
• pp.97-102
• /
• 2002

A series of waterbome poly(urethane-urea) anionomers were prepared from isophorone diisocyanate (IPDI), polycaprolactone diol (PCL), dimethylol propionic acid (DMPA), ethylene diamine (EDA), and triethylamine (TEA), NaOH, or Cu($(COOCH_3)_2$) as neutralizing agent. This study was performed to decide the effect of neutralizing agent type on the particle size viscosity, hydrogen bonding index, adhesive strength, antistaticity, antibacterial and mechanical properties. The particle size of the dispersions decreased in the following order: TEA based samples (T-sample), NaOH based samples (N-sample), and Cu($(COOCH_3)_2$) based sample (C-sample). The viscosity of the dispersions increased in the order of C-sample, N-sample, and T-sample. Metal salt based film samples Of and C-sample) had much higher antistaticity than TEA based sample. By infrared spectroscopy, it was found that the hydrogen bonding index (or fraction) of samples decreased in the order of T-sam-pie, N-sample, and C-sample. The adhesive strength and tensile modulus/strength decreased in the order of T-sample, N-sam-pie, and C-sample. The C-sample had strong antibacterial halo, however, T- and N-samples did not

• 한국재료학회지
• /
• 제7권7호
• /
• pp.576-581
• /
• 1997

TDEAT(TI[N(C$_{2}$H$_{5}$)$_{2}$]$_{4}$)와 NH$_{3}$반응기체를 이용하여 MOCVD(Metal Organic Chemical Vapor Deposition)TiN 박막을 형성하였다. 반응기체들은 chamber내에 주입하기 전에 적절한 기상반응을 유도시켜 주었으며, TiN박막 형성에 미치는 예비혼합 효과를 관찰하였다. 두 반응기체의 예비혼합을 이용하여 낮은 탄소의 함유와 함께 -800$\mu$Ωㆍcm의 비교적 낮은 비저항을 나타내었다. 또한 NH$_{3}$의 유량 증가에 따라 도포성이 상당히 증가되고 있는데 이같은 도포성 향상 효과는 기상반응에 의하여 형성되는 중간상의 낮은 흡\ulcorner계수에 기인하는 것으로 여겨진다. QMS(Quadruple Mass Spectrometer)분석을 이용하여 두가지 경쟁적 반응을 포함한 전체 반응식을 제시하였다. TDEAT/NH$_{3}$혼합증착원의 경우 particle이 관찰\ulcorner지 않았으며 이것은 기상반응의 정도를 효과적으로 조절한데 기인하는 것으로 여겨진다. 결과적으로 반응기체의 예비혼합은 막질 및 도포성 개선과 함께 particle생성억제에 매우 효율적인 방법임을 알 수 있었다.다.

• 한국기계가공학회지
• /
• 제7권1호
• /
• pp.67-74
• /
• 2008

In this paper, the surface characteristics of the AIP-TiN coated of the SKH51 and SKD11 steels under various deposition times are presented with emphasis on the comparison of the two materials. The micro-particle, the surface roughness, the micro-hardness, the coated layer thickness, the atomic distribution of Ti, N and Fe elements and the adhesion are measured for various deposition times. It has been shown that the micro-particle, the surface roughness, the coated layer thickness and the atomic distribution of Ti, N and Fe elements are similar for the two cases regardless of the test deposition time from 10 to 180 minutes. However, it has been shown that the micro-hardness and the adhesion of the SKH51 steel are higher than the SKD11 steel, indicating that they are much affected by the hardness of the material to be coated.

• 한국세라믹학회지
• /
• 제39권8호
• /
• pp.783-788
• /
• 2002

본 연구에서는 TMS[Tetramethylsilane:Si($CH_3)_4$], $NH_3$와 $H_2$를 이용하여 나노크기의 Si-C-N precursor 분말을 합성하기 위하여 CVC법을 이용하였으며 반응온도, TMS/$NH_3$ 비 그리고 TMS/$H_2$ 비를 변화시켰다. XRD와 FESEM 분석을 통해서 결정상과 입자의 크기 그리고 입자의 형태를 관찰하고자 하였으며, 그 결과 제조된 분말은 모든 실험 조건하에서 87∼130 nm 크기를 지닌 균일한 구형의 비정질 분말이 얻어졌다. 입자 크기는 반응온도의 감소에 따라 감소하였으며, 또한 TMS/$NH_3$, TMS/$H_2$ 비가 작아질수록 감소하였다. EA 분석 결과 제조된 분말은 Si, N, C, H로 이루어졌음을 알 수 있었으며 FT-IR를 통하여 Si-N, C-N, Si-C 결합을 가진 Si-C-N precursor 분말이 제조되었다

• 분석과학
• /
• 제23권2호
• /
• pp.216-223
• /
• 2010

Ag 분말 입자형태와 크기에 따른 효율성을 확인한 결과 flake, spherical 형태의 분말은 시판 회색 분말과 현출효율이 유사하였고, nAg (rod, $0.9\;{\mu}m$) 분말의 경우 다양한 잠재지문 현출효율 평가 실험에서 우수한 결과를 보였다. 그러나 1개월간 nAg 분말을 자연조건에서 방치하였을 때 분말의 산화 및 수분의 영향으로 현출효율이 낮게 확인되어 산화 및 수분 흡습 방지를 위한 연구가 제기되었다. 본 연구는 nAg 분말의 산화 및 수분 흡습의 단점을 보완하기위해 nAg 분말에 실리콘 오일을 다양한 수준으로 표면개질하여 비다공성 대상물질 표면인 유리, 플라스틱에서 현출지문의 동일한 영역에서 특징점 수, 이랑과 분말의 흡착정도, 현출지문의 contrast 등으로 nAg 분말과 표면개질 nAg 분말의 현출효율을 평가하여 유리, 플라스틱 대상물질에서 DC200 실리콘 오일 0.5%로 표면개질한 nAg 분말의 우수함과 산화 및 수분 흡습의 단점을 보완할 수 있었다.