• Korean Journal of Plant Taxonomy
• /
• v.34 no.2
• /
• pp.173-183
• /
• 2004

한국산 미나리아재비속 미나리아재비(Acris Schur)절에 속하는 미나리아재비(Ranunculus japonicus)와 근연종인 산미나리아재비(R. acris var. nipponicus) 및 바위미나리아재비(R. crucilobus)의 실체와 분류학적 한계를 파악하기위해 속, 종간 규명에 많이 이용하고 있는 핵리보좀(ribosomal) DNA의 internal transcribed spacer 구간의 염기서열을 분석하였다. 본 연구는 6개의 군외군을 포함하여 총 18개의 DNA 재료(accessions)의 정열된 염기서열들을 바탕으로 bootsrap을 포함한 maximum parsimony와 maximum likelihood 분석법에 의한 계통수로 평가하였다. 연구 결과 Acris절에 속하는 미나리아재비, 산미나리아재비 및 바위미나리아재비는 단계통군으로 나타났으며 특히 미나리아재비(R. japonicus)와 산미나리아재비(R. acris var. nipponicus)는 같은 분계조를 형성하였다. 이와 달리 바위미나리아재비는 미나리아재비와 산미나리아재비에서 분지된 결과를 보여, 한라산 해발 1500m이상의 높은 지역에 분포하는 바위미나리아재비는 미나리아재비의 아종(R. japonicus Thunb. subsp. chrysotrichus (Nakai) Y. N. Lee, comb. nud.)으로 처리하기보다는, 독립된 고유종인 R. crucilobus H. L$\acute{e}$v.으로의 처리를 지지하였다.

• Journal of Environmental Health Sciences
• /
• v.22 no.4
• /
• pp.69-76
• /
• 1996

Biological process have the potential to remove pollutants such as biodegradable organic fraction, $NH_3-N$, ABS, etc. that may be partially removed by conventional water treatment. This study was performed to evaluate four different processes of biological pretreatment as Biological Fluidized Bed(BFB), Biological Filter(BF), Rotating Biological Contactor(RBC) and Honey Comb(HC). In a given condition it proved out that BFB and BF are prospective biological pretreatment processes because they were the most effective on the removal of organic matter and ammonia. Preozonation of raw water for biological processes increased in biodegradable organic fraction about 10-40% with 0.425-0.85 mg $O_3/mg$ DOC.

• Journal of Sensor Science and Technology
• /
• v.9 no.6
• /
• pp.424-429
• /
• 2000

A novel differential pressure sensor has been developed with silicon beams embedded in a silicone rubber membrane. The transducer is usable for most applications involving exposure to harsh media. A piezoresistive differential pressure sensor using silicone rubber membrane has been fabricated on the selectively diffused (100)-oriented n/n+/n silicon substrates by a unique silicon micro-machining technique using porous silicon etching. The pressure sensitivity is about $0.66\;{\mu}V/mmHg$ and the non-linearity is less than 0.1%.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.38 no.9
• /
• pp.605-610
• /
• 2001

Electrostatic comb-drive microactuators with sub-micron gap were fabricated and tested. We designed and fabricated two type of electrodes which are rectangular and triangular tip. The fabricated microactuators with triangular tip resulted in the electrode gaps in the range of 0.55 ${\mu}{\textrm}{m}$~1.35 ${\mu}{\textrm}{m}$ Displacement of 1 ${\mu}{\textrm}{m}$ and electrostatic force of 2.3 $\mu$N were observed in a triangular-tip microactuator with 0.55 ${\mu}{\textrm}{m}$ gap when a DC drive voltage of 13 volts was applied. Measured 1st resonance frequency of microactuators was about 23 kHz.

• Korean Journal of Environmental Biology
• /
• v.41 no.3
• /
• pp.223-228
• /
• 2023

Neoporphyra kitoi Ma. Abe, N. Kikuchi, Tamaki, Tom. Sato, Murase, Fujiyoshi & Mas. Kobayashi has been known as an endemic species in Japan. Its high temperature tolerance suggests that it could be advantageous for cultivation. In this study, we collected it from the Ulleungdo island, Korea and transferred it into Pyropia for a new combination, identified as Pyropia kitoi(Ma. Abe, N. Kikuchi, Tamaki, Tom. Sato, Murase, Fujiyoshi & Mas. Kobayashi) D.J. Kim, T.O. Cho & B.Y. Won comb. nov. based on morphological and molecular analyses. Pyropia kitoi is also reported as a new record species in the list of Korean macroalgal flora. Although we didn't observe the emergence of new blades from the rhizoidal cells, which is a key character for this species, our molecular analysis of rbcL revealed that our samples from Korea were congruent with "Neoporphyra kitoi" from Japan and were nested within the clade of Pyropia. The gene sequence divergence between the Korean and Japanese samples was 0-0.2%.

• Applied Biological Chemistry
• /
• v.11
• /
• pp.89-93
• /
• 1969

The strains selected in the previous paper were identified according to the manual of Aspergilli by Thom and Raper, and the preparation of the crude enzymes with the strains were investigated. The fermented fodders were made with wheat bran and chaffs containing 20% wheat bran by the strains, and the feeding experiments concerned was conducted. The results obtained are as follows: 1. The selected strains were identified as below; MC-9 was a similar strain of Aspergillus niger van Tieghem, MC-10 was a similar strain of Aspergillus flavus Link, MC-53 was a similar strain of Aspergillus penicilloides Spegazzini and MC-61 was a similar strain of Aspergillus niger mut Schiemanni n. comb. 2. Percentages of crude enzymes obtained from the dried matters of the wheat bran cultures were MC-9: 2.9%, MC-10: 3.9%, MC-53: 6.4% and MC-61:2.6%. And the cellulase activity of MC-9 was the most active among the crude enzymes as the same as the filtrates of wheat bran cultures. 3. As the results of the feeding experiments, changes of body weights showed no trends to be significant as compared with the control group, and the groups of MC-9 and MC-61 showed the increasing significance with P<0.05 in egg-laying rate.

• Membrane Journal
• /
• v.30 no.4
• /
• pp.252-259
• /
• 2020

Olefins are industrially important materials used for the synthesis of various petrochemicals. During the polymerization process, unreacted olefin monomers are discharged together with a large amount of nitrogen. For economic benefits, these olefin gases should be efficiently separated from nitrogen. In this study, a poly(glycidyl methacrylate-co-methyl methacrylate) (PGM) comb-like copolymer was synthesized and 4,4'-diaminoazobenzene (DAAB) was introduced to the copolymer to prepare a cross-linked membrane for C₃H₆/N₂ separation. PGM and DAAB were readily reacted at room temperature through an epoxide-amine reaction without additional thermal treatment. PGM-based membrane, which is a glassy polymer, showed a faster permeation of N₂ compared to C₃H₆. The pristine PGM membrane exhibited the N₂ permeability of 0.12 barrer and the high N₂/C₃H₆ selectivity of 32.4. As DAAB was introduced as a cross-linker, the thermal stability of the membrane was significantly improved, which was confirmed by TGA result. The N₂/C₃H₆ selectivity was decreased at 1 wt% of DAAB content, but the N₂ permeability increased by approximately 4.7 times. We analyzed N₂/C₃H₆ gas separation properties through a glassy polymer-based membrane, which has not been widely studied. Also, we proposed that thermal stability of the membrane can be greatly improved by the cross-linking method.

• Proceedings of the KSME Conference
• /
• 2001.06c
• /
• pp.53-58
• /
• 2001

This paper presents a high resolution capacitive microaccelerometer for applications to personal information systems. We reduce the mechanical noise level of the microaccelerometer by increasing the proof-mass based on deep RIE process. We reduce the electrical noise level by increasing the amplitude of an AC sense voltage. The high sense voltage is obtained by DC-to-DC voltage multiplier. In order to solve the nonlinearity problem caused by the high sense voltage, we modify the conventional comb electrode of straight finger type into that of branched finger type, resulting in self force-balancing effects for enhanced detection linearity. The proposed branched finger capacitive microaccelerometer was fabricated by the deep RIE process of an SOI wafer. The fabricated microaccelerometer reduces the electrical noise at the level of $2.4{\mu}g/\sqrt{Hz}$ for the sense voltage of l6.5V, which is 10.1 times smaller than the electrical noise level of $24.3{\mu}g/\sqrt{Hz}$ at 0.9V. For the sense voltage higher than 2V, the electrical noise level of the microaccelerometer became smaller than the constant mechanical noise level of $11{\mu}g/\sqrt{Hz}$. Total noise level, including the electrical noise and the mechanical noise, has been measured as $9{\mu}g/\sqrt{Hz}$ for the sense voltage of 16.5V, which is 3.2 times smaller than the total noise of $28.6{\mu}g/\sqrt{Hz}$ for the sense voltage of 0.9V. The self force-balancing effect results in the increased stiffness of 1.98 N/m at the sense voltage of 17.8V, compared to the stiffness of 1.35 N/m at 0V, thereby generating the additional stiffness at the rate of $0.002N/m/V^{2}$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.6 no.2
• /
• pp.243-248
• /
• 1993

The effect of dietary lipid factors (plant and animal oil, cholesterol and ${\beta}$-sitosterol) on the liver, serum, and egg yolk cholesterol levels of the laying hen was studied. Single Comb White Leghorn laying hens, at 28 weeks of age, were fed two basal diets containing 8.0% soybean oil or 8.0% fish oil, with or without supplemental cholesterol (1.0%), ${\beta}$-sitosterol (2.0%) or combinations of both. Restricting caloric intake resulted in significantly (p<.05) decreased egg production and the total amount of cholesterol excreted via the egg was significantly (p<.05) different among treatment groups. Cholesterol supplementation to the two basal diets resulted in a significant elevation of liver, serum and egg yolk cholesterol levels. The addition of ${\beta}$-sitosterol lowered the cholesterol levels in liver and serum, while increased in the egg yolk (SO + ST, FO + ST). The anticholesterogenic effect of dietary ${\beta}$-sitosterol was not clearly exhibited in this study.

• Applied Microscopy
• /
• v.51
• /
• pp.11.1-11.9
• /
• 2021

Spider capture silk is a natural scaffolding material that outperforms most synthetic materials in terms of its combination of strength and elasticity. Among the various kinds of silk threads, cribellar thread is the most primitive prey-capturing type of spider web material. We analyzed the functional organization of the sieve-like cribellum spigots and specialized calamistral comb bristles for capture thread production by the titanoecid spider Nurscia albofasciata. The outer cribellar surface is covered with thousands of tiny spigots, and the cribellar plate produces non-sticky threads composed of thousands of fine nanofibers. N. albofasciata cribellar spigots are typically about 10 ㎛ long, and each spigot appears as a long individual shaft with a pagoda-like tiered tip. The five distinct segments comprising each spigot is a defining characteristic of this spider. This segmented and flexible structure not only allows for spigots to bend individually and join with adjacent spigots, but it also enables spigots to draw the silk fibrils from their cribella with rows of calamistral leg bristles to form cribellar prey-capture threads.