• Journal of Electrochemical Science and Technology
• /
• v.11 no.1
• /
• pp.68-83
• /
• 2020

A fast and simple method for synthesis of Cu_xO-ZnO/PPy/RGO nanocomposite by electrochemical manner have been reported in this paper. For testing the utility of this nanocomposite we modified a GCE with the nanocomposite to yield a sensor for simultaneous determination of four analytes namely ascorbic acid (AA), dopamine (DA), uric acid (UA), and folic acid (FA). Cyclic voltammetry (CV) and Differential pulse voltammetry (DPV) selected for the study. The modified electrode cause to enhance electron transfer rate so overcome to overlapping their peaks and consequently having the ability to the simultaneous determination of AA, DA, UA, and FA. To synthesis confirmation of the nanocomposite, Field emission scanning electron microscopy (FE-SEM), Raman spectroscopy, and electrochemical impedance spectroscopy (EIS) were applied. The linearity ranges were 0.07-485 μM, 0.05-430 μM, 0.02-250 μM and 0.022-180 μM for AA, DA, UA, and FA respectively and the detection limits were 22 nM, 10 nM, 5 nM and 6 nM for AA, DA, UA, and FA respectively Also, the obtained electrode can be used for the determination of the AA, DA, UA, and FA in human blood, and human urine real samples.

• Economic and Environmental Geology
• /
• v.31 no.4
• /
• pp.297-310
• /
• 1998

Geochemical characteristics of environmental toxic elements at the Narim mine area were investigated on the basis of major, minor, rare earth element geochemistry and mineralogy. Ratios of $Al_2O_3/Na_2O$ and $K_2O/Na_2O$ in soils and sediments range from 11.57 to 22.21 and from 1.86 to 3.93, and are partly negative and positive correlation against $SiO_2/Al_2O_3$ (3.41 to 4.78), respectively. These suggested that sediment source of host granitic gneiss could be due to rocks of high grade metamorphism originated by sedimentary rocks. Characteristics of some trace and rare earth elements of V/Ni (0.33 to 1.95), Ni/Co (2.00 to 6.50), Zr/Hf (11.27 to 53.10), La/Ce (0.44 to 0.55), Th/Yb (4.07 to 7.14), La/Th (2.35 to 3.93), $La_N/Yb_N$ (6.58 to 13.67), Co/Th (0.63 to 2.68), La/Sc (3.29 to 5.94) and Sc/Th (0.49 to 1.00) are revealed a narrow range and homogeneous compositions may be explained by simple source lithology. Major elements in all samples are enriched $Al_2O_3$, MgO, $TiO_2$ and LOI, especially $Fe_2O_3$ (mean=7.36 wt.%) in sediments than the composition of host granitic gneiss. The average enrichment indices of major and rare earth elements from the mining drainage are 2.05 and 2.91 of the sediments and are 2.02 and 2.60 of the soils, normalizing by composition of host granitic gneiss, respectively. Average composition (ppm) of minor and/or environmental toxic elements in sediments and soils are Ag=14 and 1, As=199 and 14, Cd=22 and 1, Cu=215 and 42, Pb=1770 and 65, Sb=18 and 3, Zn=3333 and 170, respectively, and extremely high concentrations are found in the subsurface sediments near the ore dump. Environmental toxic elements were strongly enriched in all samples, especially As, Cd, Cu, Pb, Sb and Zn. The level of enrichment was very severe in mining drainage sediments, while it was not so great in the soils. Based on the EPA value, enrichment index of toxic elements is 8.63 of mining drainage sediments and 0.54 of soils on the mining drainage. Mineral composition of soils and sediments near the mining area were partly variable being composed of quartz, mica, feldspar, amphibole, chlorite and clay minerals. From the gravity separated mineralogy, soils and sediments are composed of some pyrite, arsenopyrite, chalcopyrite, sphalerite, galena, goethite and various hydroxide minerals.

• Korean Journal of Materials Research
• /
• v.3 no.3
• /
• pp.261-271
• /
• 1993

Functionally Gradient Materials(FGM) of 4.5Pb($Ni_{1/3}Nb_{2/3})O_3$-55PZT and PLZT(lO/70 /30, 11/60/40) were prepared. Its dielectric and piezoelectric strain properties were investigated. The FGM were pressed into A/B/ A configuration using two kinds of films, one layer(A) was eliminated from FGM by polishing after sintering at $l250^{\circ}C$, 2 hrs. The acrylic binder system was successfully applied for crack free film through doctor blade method. The thickness of gradent layer in FGM was about 30${\mu}$m. Dielectric properties of FGM show the average value of each side layer. The strain-electric field characteristics of FGM were significantly improved comparison with the other single compositions. The prepared FGM piezoelectric actuator shows about 3${\mu}$m/IOOV displacement.

• Clean Technology
• /
• v.6 no.1
• /
• pp.61-69
• /
• 2000

In this study, generation process and properties of inorganic industrial waste which can be used in cement industry were investigated. The scheme of recycling to use the selected waste as raw materials, mineralizer and flux, admixture and raw materials for special cement was decided and then various experiments were carried out. The experimental results were as follows ; In the use of industrial waste as raw materials, ferrous materials could be substituted by Cu-slag, Zn-slag, electric arc furnace or convertor furnace slag etc., and a siliceous material could be substituted by sand from cast-iron industry. By-products from sugar or fertilizer industry, which has $CaF_2$ as the main component, and jarosite from Zn refinery enabled clinker phases to be formed at lower temperature by $100{\sim}150^{\circ}C$. Adding Cu slag and STS sludge in proper proportion to cement improved properties of cement. Fly ash and limestone powder as admixture had the same effect on cement. As a raw material for special cement, aluminium waste sludge could be used in making ultra early strength cement, which had the compressive strength of $300kg/cm^2$ within 2hours. And two different ashes from municipal incinerator could be raw materials of the cement which was mainly composed of $C_3S$ and $C_{11}A_7{\cdot}CaCl_2$ as clinker phases.

• Journal of Fisheries and Marine Sciences Education
• /
• v.19 no.1
• /
• pp.1-7
• /
• 2007

The purpose of this study was to investigate geochemical characteristics of surface sediments in the Keum river estuary adjacent to coastal area. For this study we collected the 21 surface sediments samples. Mean size of surface samples was $3.24{\sim}6.65{\phi}$ on inner estuary and was $2.15{\sim}3.42{\phi}$ on outside estuary. Surface samples were composed of silt on inner estuary and were composed of sand which was more larger than $4{\phi}$ on outside estuary. Most major elements except CaO, $Na_2O$ showed good relationships between variation of contents and grain size. Contents of $Al_2O_3$, $Fe_2O_3$, MgO, $K_2O$, $TiO_2$, $P_2O_5$ and $M_nO$ were increased predominately owing to the variation of mean size of surface samples. Contents of Co, Cr, Cu, Li, Sr, Zn, La, Ce, Pb, Rb, Nd have a good relationships with grain size but Ba, Th, Sm have not. All of major and minor elements contents except $K_2O$ and Ba were less than world mean contents of shallow surface sediments but apprehend a high pollution possibility on silt sediments in the estuaries.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.25 no.2
• /
• pp.121-124
• /
• 2012

The characteristics of Ga-doped zinc oxide (GZO) thin films deposited at different deposition temperatures (TS~250 to $550^{\circ}C$) on 4H-SiC have been investigated. Structural and electrical properties of GZO thin film on n-type 4H-SiC(0001) were investigated by using x-ray diffraction(XRD), atomic force microscopy(AFM), Hall effect measurement, barrier height from I-V curve and Auger electron spectroscopy(AES). XRD $2\theta$ scan shows GZO thin film has preferential orientation with c-axis perpendicular to SiC substrate surface. The lowest resistivity ($\sim1.9{\times}10^{-4}{\Omega}cm$) was observed for the GZO thin film deposited at $400^{\circ}C$. As deposition temperature increases, barrier height between GZO and SiC was increased. Whereas, resistivity of GZO thin films as well as barrier height between GZO and SiC were increased after annealing process in air atmosphere. It has been found that the c-axis oriented crystalline quality as well as the relative amount of activated Ga3+ ions and oxygen vacancy may affect the electrical properties of GZO films on SiC.

• 한국신재생에너지학회:학술대회논문집
• /
• 2009.06a
• /
• pp.23-23
• /
• 2009

CIGS 박막 태양전지는 제조단가가 낮고 박막 태양전지 중에서 변환효율이 가장 높아 발전 가능성이 큰 태양전지로 인식되고 있다. 이미 일본, 독일, 미국을 비롯한 선진국에서는 30-50 MW 급의 양산 라인이 구축되고 있어 2010년 이후에는 본격적인 상용화가 진행될 것으로 보인다. CIGS 광흡수층은 진공증발, 셀렌화, 나노입자, 전기도금등 다양한 방식으로 제조가 가능한데 이 중에서도 동시진공증발공정은 고효율 CIGS 박막 태양전지 제조에 적합하다. 본 연구에서는 동시진공증발법을 이용하여 CIGS 박막을 증착하였으며 소다회유리/Mo/CIGS/CdS/i-ZnO/n-ZnO/Al/AR 구조의 태양전지를 제조하였다. 기판온도 모니터링을 통한 Cu 이차상 조절 기술을 이용하여 결정립이 매우 큰 CIGS 박막을 증착하였으며 Ga/(In+Ga) 조성비의 조절을 통하여 밴드갭 에너지를 최적화하였다. 또한 QCM 장치를 활용하여 용액 속에서 성장되는 CdS 박막의 두께와 특성을 조절하였다. 이러한 공정최적화를 통하여 개방전압 0.65 V, 단락전류밀도 38.8 $mA/cm^2$, 충실도 0.74 그리고 변환효율 18.8% 의 CIGS 박막 태양전지를 얻었다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.399-399
• /
• 2011

본 논문에서는 Indium tin oxide (ITO) 투명전극의 성장온도($T_G$)가 Cu(In,Ga)$Se_2$ (CIGS) 박막태양전지에 미치는 영향을 살펴 보았다. ITO 박막은 radio-frequency magnetron sputtering을 이용하여 상온에서 $350^{\circ}C$까지의 다양한 $T_G$ 조건에서 i-ZnO/ glass와 i-ZnO/CdS/CIGS/Mo/glass 기판에 증착되었다. ITO의 비저항과 CdS/CIGS 계면 특성은 $T_G$에 크게 영향을 받았다. $T_G{\leq}200^{\circ}C$에서는 $T_G$가 증가할수록 ITO 저항이 감소하였고 이에 따른 series 저항 감소가 태양전지 성능 향상에 기여하였다. 하지만 $T_G$ > $200^{\circ}C$에서는 CdS 버퍼층의 Cd이 CIGS 층으로 확산되어 소자의 p-n 계면이 파괴되는 것을 발견하였다. $T_G=200^{\circ}C$에서 ITO를 증착한 CIGS 태양전지의 경우 가장 높은 광전변환효율을 보였다.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2013.08a
• /
• pp.191.1-191.1
• /
• 2013

현재 산업계 전반적으로 사용되고 있는 박막형 태양전지 투명 전도막의 재료로는 ITO 와 Al, In, Ga, B, Si, F 등으로 도핑된 ZnO 박막이 사용되고 있으며, 그 중에서도 Al 이 도핑된 ZnO 박막은 넓은 밴드갭을 가진 n-type 반도체로서, 적외선 및 가시광 영역에서의 높은 투과성과 우수한 전도성을 가지며, 고온에서 안정된 전기적 특성, 낮은 원가 등의 장점을 지녀 그 응용 연구가 활발히 이루어지고 있다 [1]. 본 연구에서는 RF magnetron Sputter 법을 이용하여 Flexible 기판 위에 AZO 박막을 증착하였다. 실험변수로는 RF power, Pressure등을 이용하였고, 최적조건에서의 박막의 투과도는 90%이상, 면저항은 30 ${\Omega}/{\square}$ 이하를 나타내었다. 그리고 (주)인포비온에서 원천기술을 갖고있는 EBA technology를 이용하여 후처리 하여 전기적, 광학적, 구조적인 특성의 변화를 관찰하였다. AZO 박막의 두께를 측정하기 위해 ${\alpha}-step$과 SEM을 이용하였고, 투과도는 UV-Vis spectrometer를 사용하여 박막의 투과도 변화를 관찰 하였다. 전기적인 특성은 4-Point probe를 이용하여 측정하였다. 또한, 박막의 결정성과 거칠기의 변화는 XRD(X-ray Diffraction)와 원자간력현미경(Atomic Force Microscope; AFM) 을 이용하여 측정하였으며, 전기 광학적 특성 변화는 Figure Of Merit(FOM) 수치로 분석하였다. 본 연구에서 AZO 박막의 특성은 EBA 조사 후 특성의 향상이 이루어지는 것을 관찰할 수 있었다.

• Analytical Science and Technology
• /
• v.13 no.2
• /
• pp.173-178
• /
• 2000

A new open-chain ligand containing two phenol groups, 1, 14-Bis (2-hydroxybenzyl)-2, 6, 9, 12-tetraazatetradecane(bsated) was synthesized as its tetrahydrochloride salt and characterized by elemental analysis, mass, infrared and NMR. Its proton dissociation constants ($logK^n{_H}$) and stability constants ($logK_{ML}$) toward $Co^{2+}$, $Ni^{2+}$, $Cu^{2+}$ and $Zn^{2+}$ were determined at $25^{\circ}C$ and 0.10M($KNO_3$) ionic strength in aqueous solution by potentiometry. The X-ray structure of its copper (II) complex [Cu(bsated)]$(ClO_4)_2$ was reported: Monoclinic space group $P2_1/n$, $a=17.856(4){\AA}$, $b=17.709(1){\AA}$, $c=8.539(2){\AA}$, $V=2700(2){\AA}$ with Z=4. Electrochemical studies of [Cu(bsated)]$(ClO_4)_2$ complex in dimethyl sulfoxide (DMSO) solution containing tetrabutylammonium perchlorate (supporting electrolyte) were carried out by cyclic voltammograms (CV) and normal pulse voltammetry (NPV).