• 제목/요약/키워드: n-Octane

검색결과 84건 처리시간 0.018초

유류화재증거물 보관용기의 신뢰성에 관한 연구 (Preserving Reliability of Evidence Containers for Fire Debris Containing Ignitable Liquids)

  • 한동훈;이성룡
    • 한국화재소방학회논문지
    • /
    • 제27권2호
    • /
    • pp.70-74
    • /
    • 2013
  • 화재 현장에서 수집된 화재증거물은 신뢰성 있는 용기에 수집, 보관 되어 감정기관으로 제공되어야 한다. 본 연구에서는 인화성 물질 5종(톨루엔, 노말옥탄, o-자일렌, 노말데칸, 노말헥사데칸)의 장판화재 증거물과 10 ${\mu}L$의 인화성 물질 5종을 적신 킴와이프스 종이를 4가지 용기(금속캔, 유리병, 나일론 지퍼백, 나일론 실링 백)에 두고, 온도 및 보관 기간에 따라 보관한 후 시료 속의 인화성 물질 잔존 유무를 가스크로마토그래프/질량분석기를 이용하여 확인하였는데, 그 결과 테프론이 코팅된 마개를 가진 유리병의 경우가 $60^{\circ}C$에서 22일 동안 보관하여도 5종의 화학물질이 검출이 가능하여, 유리병이 보관 성능이 가장 우수함을 확인하였다.

LPG/DME 혼합연료를 사용하는 전기점화 기관에서 LPG 성분이 엔진 성능 및 배기특성에 미치는 영향 (The Effect of N-butane and Propane on Performance and Emissions of a SI Engine Operated with LPG/DME Blended Fuel)

  • 이석환;오승묵;최영;강건용;최원학;차경옥
    • 한국자동차공학회논문집
    • /
    • 제17권1호
    • /
    • pp.35-42
    • /
    • 2009
  • In this study, a spark ignition engine operated with LPG and DME blended fuel was studied experimentally. The effect of n-butane and propane on performance and emissions of a SI engine fuelled by LPG/DME blended fuel were examined. Stable engine operation was achieved for a wide range of engine loads with propane containing LPG/DME blended fuel compare to butane containing LPG/DME blended fuel since octane number of propane was much higher than that of butane. Also, engine output operated with propane containing blended fuel was comparable to pure LPG fuel operation. Engine output power was decreased and break specific fuel consumption (BSFC) was increased with the blended fuel since the energy content of DME was much lower than that of LPG. Considering the results of engine output power, bsfc, and exhaust emissions, the propane containing LPG/DME blended fuel could be used as an alternative fuel for LPG.

Preparation of Pore-filled Anion-exchange Membrane with PVDF and Poly(vinylbenzylchloride)

  • Park, Byungkyu;Byungpyo Hong;Kwangsoo Yu;Hongsik Byun
    • 한국막학회:학술대회논문집
    • /
    • 한국막학회 2004년도 Proceedings of the second conference of aseanian membrane society
    • /
    • pp.207-210
    • /
    • 2004
  • The pore-filled anion-exchange membranes were prepared in this study with an asymmetric poly(vinylidene fluoride)(PVDF) membrane as a nascent membrane and poly(vinylbenzyl chloride)(PVBCl) as a polyelectrolyte. The solution of PVBCI having the chloromethylate aryl ring of 80 percents and 1,4-diaminobicyclo [2,2,2]octane(DABCO) was made with the solvent of tetrahydrofuran(THF) and N,N-Dimethylformamide(DMF), which is in the rotio of 8:2. A new preparation method in this study, i.e. in-situ crosslinking, enabled us to produce the pore-filled membranes without change of size, and to control the properties of final membrane with various degree of cross-linking. From the result of surface morphologies of SEM and AFM the polyelectrolyte exists in the pores of nascent membrane as a certain configuration. From the investigation of the solvent affecting much to the permeability and rejection, it was found. that the membranes using DMF and THF showed better performances than the membranes produced by THF only. The water permeability of the final membrane at low pressure(100㎪) showed a typical ultrafiltation membrane's permeability (8-10kg/㎡hr) and good values of rejection(55∼60 percent).

Poly(ethylene-co-octene)과 탄화수소 2성분계 혼합물의 상거동에 대한 고분자 농도 및 용매의 영향 (Effect of Polymer Concentration and Solvent on the Phase Behavior of Poly(ethylene-co-octene) and Hydrocarbon Binary Mixture)

  • 이상호;정성윤;김효준;박경규
    • Elastomers and Composites
    • /
    • 제39권4호
    • /
    • pp.318-323
    • /
    • 2004
  • Poly(ethylene-co-13.8 mol% octene) ($PEO_{13.8}$), Poly(ethylene-co-15.3 mol% octene) ($PEO_{15.3}$)과 분자크기와 분자구조가 각각 다른 탄화수소의 2성분계 혼합물에 대한 cloud-point, bubble-point 압력을 $150^{\circ}C$, 450 bar까지 측정하였다. (PEO+n-프로판), (PEO+n-부탄) 2성분계 혼합물에서 cloud-point 곡선이 측정되었고, (PEO+n-펜탄) 혼합물에서는 cloud-point와 bubble-point 곡선이 모두 측정되었다. (PEO+시클로펜탄), (PEO+시클로헥산), (PEO+시클로 헵탄), (PEO+시클로옥탄) 2성분계 혼합물에서는 bubble-point 곡선이 측정되었다. (PEO+탄화수소) 2성분계의 압력-조성 등온곡선과 온도-조성 등압곡선은 PEO의 농도가 약 5 wt%일 때 각각 최고점과 최저점을 가졌다. (PEO+탄화수소) 2성분계는 PEO 농도가 5 wt%에서 임계조성을 가진다. PEO는 n-알칸과 시클로알칸 용매에서 LCST 유형의 상거동을 보여주며, 탄화수소의 분자크기가 증가할수록 PEO의 녹는 압력은 감소하였고 용해도는 증가하였다.

경유의 Model solution에서 고정화효소를 이용한 Dibezothiophene의 산화

  • 허정찬;성현태;류근갑
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2001년도 추계학술발표대회
    • /
    • pp.517-520
    • /
    • 2001
  • Fossil fuels such as coal and crude oil contain various organic sulfur compounds. Combustion of these fuels emit sulfur oxides which are considered as msjor air pollutants causing acid rain problem. Among various organic sulfur compounds, aromatic sulfur compounds of thiophenes which constitute major sulfur fractions of heavy oils are not easily removed by hydrodesulfurization. Many peroxidase and hemoproteins are known to oxidize dibenzothiophene (DBT) to dibenzothiophene-sulfoxide(DBT - sulfoxide) then dibenzothiophene- sulfone (DBT-sulfone). The oxidation of DBT by the immobilized hemoproteins in n-octane was increased significantly when the hemoproteins were deposited on celites of the particle size between 0.75 - 1.0 mm and a conventional substrates. such as t-butyl hydroperoxide and cumene hydroperoxide. In anhydrous organic solvents with log P values larger than 4.0 DBT was completely oxidized by cumene hydroperoxide catalyzed by cytochrome c deposited on celites.

  • PDF

Improvement of Hydrocarbon Recovery by Two-Stage Cell-Recycle Extraction in the Cultivation of Botryococcus braunii

  • An, Jin-Young;Sim, Sang-Jun;Kim, Byung-Woo;Lee, Jin-Suk
    • Journal of Microbiology and Biotechnology
    • /
    • 제14권5호
    • /
    • pp.932-937
    • /
    • 2004
  • In situ extraction by organic solvent was studied in order to improve the recovery yield of hydrocarbon from the culture of Botryococcus braunii, a green colonial microalga. When the solvent mixture of octanol as an extractive solvent and n-octane as a biocompatible solvent was added to a two-phase column, the algal growth was seriously inhibited, even at a low concentration of polar octanol. Therefore, a two-stage cell-recycle extraction process was proposed to improve the contact area between the organic phase and the aqueous phase. The hydrocarbon recovery with in situ cell-recycle extraction showed a three-fold increase (57% of cell) in yield over that with two-phase extraction. In addition, over 60% of the hydrocarbon could be recovered without serious cell damage by downstream separation when this process was applied to the culture broth after batch fermentation.

A New Furofuran Lignan with Antioxidant and Antiseizure Activities from the Leaves of Petasites japonicus

  • Min Byung-Sun;Cui Hui Song;Lee Hyeong-Kyu;Sok Dai-Eun;Kim Mee Ree
    • Archives of Pharmacal Research
    • /
    • 제28권9호
    • /
    • pp.1023-1026
    • /
    • 2005
  • A new furofuran lignan (1) was isolated from the n-butanol fraction of the methanolic extract of the leaves of Petasites japonicus (Sieb. et Zucc.) Maxim. (Compositae). The structure of compound 1 was determined to be $2{\alpha}-(4'-hydroxy-3'-methoxyphenyl)-6{\alpha}-(4"-hydroxy-3"-methox­yphenyl)-8{\alpha}-hydroxy-3, 7-dioxabicyclo[3.3.0]octane\;4'-O-({\beta}-D-glucopyranoside)$ by spectroscopic methods including 2D-NMR. In further studies, it was found that the compound 1 expressed an antioxidant activity in DPPH radical scavenging assay, and moreover, ameliorated the seizure in kainic acid-treated mice.

다성분 혼합연료를 이용한 디젤 분무 및 연소특성의 광계측 진단 (Laser Diagnostics of Spray and Combustion Characteristics Using Multi-Component Mixed Fuels in a D.I. Diesel Engine)

  • 윤준규;명광재;천전이랑;등본원;차경옥
    • 한국자동차공학회논문집
    • /
    • 제14권5호
    • /
    • pp.172-180
    • /
    • 2006
  • This study was to analyze the effect of mixed fuel composition and mass fraction on the characteristics of evaporating diesel spray and combustion under the various ambient conditions. The characteristics of vaporization distribution and combustion were visualized by laser induced fluorescent method and direct photography. The experiments were conducted in the constant volume vessel and rapid compression expansion machine with optical access. Multi-component fuels mixed i-octane, n-dodecane and n-hexadecane were injected the vessel and rapid compression expansion machine with electronically controlled common rail injector. Experimental results show that fuel vapor formed stratified distribution. And vaporization and diffusion are become actively increasing in mass fraction of low boiling point component. Consequently multi-component fuels were expected to control the evaporating behavior according to their suitable mass fraction.

분사조건에 따른 가솔린 직접분사용 다공 분사기에서의 LPG 분무특성 (LPG Spray Characteristics in a Multi-hole Injector for Gasoline Direct Injection)

  • 정진영;오희창;배충식
    • 한국분무공학회지
    • /
    • 제19권1호
    • /
    • pp.1-8
    • /
    • 2014
  • Liquefied petroleum gas (LPG) is regarded as an alternative fuel for spark ignition engine due to similar or even higher octane number. In addition, LPG has better fuel characteristics including high vaporization characteristic and low carbon/hydrogen ratio leading to a reduction in carbon dioxide emission. Recently, development of LPG direct injection system started to improve performance of vehicles fuelled with LPG. However, spray characteristics of LPG were not well understood, which is should be known to develop injector for LPG direct injection engines. In this study, effects of operation condition including ambient pressure, temperature, and injection pressure on spray properties of n-butane were evaluated and compared to gasoline in a multi-hole injector. As general characteristics of both fuels, spray penetration becomes smaller with an increase of ambient pressure as well as a reduction in the injection pressure. However, it is found that evaporation of n-butane was faster compared to gasoline under all experimental condition. As a result, spray penetration of n-butane was shorter than that of gasoline. This result was due to higher vapor pressure and lower boiling point of n-butane. On the other hand, spray angle of both fuels do not vary much except under high ambient temperature conditions. Furthermore, spray shape of n-butane spray becomes completely different from that of gasoline at high ambient temperature conditions due to flash boiling of n-butane.

방청유 취급 근로자의 휘발성 유기화합물 노출 평가 (Exposure Assessment of Volatile Organic Compounds for Workers Handling Rust-preventive Oils)

  • 정윤경;최상준
    • 한국산업보건학회지
    • /
    • 제27권1호
    • /
    • pp.23-37
    • /
    • 2017
  • Objectives : This study was conducted to evaluate the level of exposure to volatile organic compounds (VOCs) among workers handling rust preventive oils. Methods : A total of 30 bulk samples and 54 personal air samples were collected using diffusive samplers at 22 workplaces handling rust preventive oils in Daegu and Gyongsangbuk-do Province from March to October 2013. We also investigated detailed information on the related work conditions, such as kinds of products, handling methods, local exhaustive ventilation systems, and the status of the wearing personal protective equipment. All bulk samples and air samples were analyzed using gas chromatography mass spectrometry (GC-MS) to identify components to which workers potentially were exposed. Quantitative airborne concentrations of VOCs were confirmed using gas chromatography with flame ionized detectors. Results : In terms of qualitative analyses for the 30 bulk samples, we found carcinogenic, mutagenic and reproductive toxic(CMR) substances such as butane(carcinogenic Group 1A, mutagenic Group 1B), butoxy ethanol(carcinogenic Group 2), cumene (carcinogenic Group 2), ethyl benzene(carcinogenic Group 2), methyl isobutyl ketone(carcinogenic Group 2) and toluene (reproductive toxic, Group 2). As a result of full-shift based personal air samples, eight substances such as n-hexane, n-heptane, octane, nonane, decane, toluene, ethyl benzene and xylene were detected. Among them, n-hexane and n-heptane were detected in all of 54 air samples with $13.13mg/m^3$ and $8.61mg/m^3$ of maximum concentration, respectively. The level of airborne concentration from all of samples were bellow the occupational exposure limit in Korea. Conclusions : Based on the results of this study, workers handling rust preventive oils could be exposed to CMR substances contained in rust preventive oils and n-hexane and n-heptane were found as the most frequent sources of VOC exposure.