• Journal of Korea Multimedia Society
• /
• v.17 no.7
• /
• pp.858-865
• /
• 2014

In the case of system like MES, various sensors collect the data in real time and save it as a big data to monitor the process. However, if there is big data mining in distributed computing system, whole processing process can be improved. In this paper, system to analyze the cause of operation deviation was built using the big data which has been collected from deasphalting process at the two different plants. By applying multivariate statistical analysis to the big data which has been collected through MES(Manufacturing Execution System), main cause of operation deviation was analyzed. We present the example of analyzing the operation deviation of deasphalting process using the big data which collected from MES by using multivariate statistics analysis method. As a result of regression analysis of the forward stepwise method, regression equation has been found which can explain 52% increase of performance compare to existing model. Through this suggested method, the existing petrochemical process can be replaced which is manual analysis method and has the risk of being subjective according to the tester. The new method can provide the objective analysis method based on numbers and statistic.

• Journal of the Korean Statistical Society
• /
• v.33 no.4
• /
• pp.401-410
• /
• 2004

We address the problem of parameter estimation in multivariate distributions under ignorable non-monotone missing data. The factoring likelihood method for monotone missing data, termed by Rubin (1974), is extended to a more general case of non-monotone missing data. The proposed method is algebraically equivalent to the Newton-Raphson method for the observed likelihood, but avoids the burden of computing the first and the second partial derivatives of the observed likelihood. Instead, the maximum likelihood estimates and their information matrices for each partition of the data set are computed separately and combined naturally using the generalized least squares method.

• Communications for Statistical Applications and Methods
• /
• v.2 no.1
• /
• pp.137-144
• /
• 1995

Hierarchical Bayes estimations of exchangeable mean vector of a multivariate Poisson distribution are obtained. Since sophiscated analytic integration procedures are needed, the Laplace method is employed in order tocompute these estimations approximately. An example is presented.

• Journal of Korean Society of Environmental Engineers
• /
• v.37 no.3
• /
• pp.137-144
• /
• 2015

The purpose of this study is to develop an warning system to detect real-time water quality abnormality using a multivariate statistical approach. In this study, we applied principal component analysis among multivariate data analyses which was used for the correlation between water quality parameters considering the real-time algorithm to determine abnormality in water quality. We applied our approach to real field data and showed the utilization of algorithm for the real-time monitoring to find water quality abnormality. In addition, our approach with Korea Meterological Adminstration database identified heavy rain data due to climate change is one of the most important factors to explain water quality abnormality.

• Journal of the Ergonomics Society of Korea
• /
• v.29 no.4
• /
• pp.631-637
• /
• 2010

The aim of affective engineering is to develop a new product by translating customer affections into design factors. Affective data have so far been analyzed using a multivariate statistical analysis, but the affective data do not always have linear features assumed under normal distribution. Rough sets model is an effective method for knowledge discovery under uncertainty, imprecision and fuzziness. Rough sets model is to deal with any type of data regardless of their linearity characteristics. Therefore, this study utilizes rough sets model to extract affective knowledge from affective data. Four types of scent alternatives and four types of sounds were designed and the experiment was performed to look into affective differences in subject's preference on air conditioner. Finally, the purpose of this study also is to extract knowledge from affective data using rough sets model and to figure out the relationships between rough sets based affective engineering method and statistical one. The result of a case study shows that the proposed approach can effectively extract affective knowledge from affective data and is able to discover the relationships between customer affections and design factors. This study also shows similar results between rough sets model and statistical method, but it can be made more valuable by comparing fuzzy theory, neural network and multivariate statistical methods.

• Water for future
• /
• v.24 no.4
• /
• pp.59-66
• /
• 1991

Abstract The purpose of the synthetic of monthly river flows based on the short-term observed data by means of multivariate stochastic models is to provide abundunt input data to the water resources systems of which the system performance and operation policy are to be determined beforehand. In this study, multivariate Thomas-Fiering and Matalas models for synthetic generation based on stream flows in neihboring basin were employed to check if it can be applide in the modeling of monthly flows. Statistical parameters estimated by Method of Moment and Fourier Series Analysis respectively were reproduced for statistical features. For comparisons the statistical parameters of the generated monthly flow by each model were compared with those of the observed monthly flows. Results of this study suggest that the application of Matalas model for synthetic generation of monthly river flows can be adapted.

• Communications for Statistical Applications and Methods
• /
• v.31 no.2
• /
• pp.179-189
• /
• 2024

In multivariate regression with a high-dimensional response Y ∈ ℝ^r and a relatively low-dimensional predictor X ∈ ℝ^p (where r ≥ 2), the statistical analysis of such data presents significant challenges due to the exponential increase in the number of parameters as the dimension of the response grows. Most existing dimension reduction techniques primarily focus on reducing the dimension of the predictors (X), not the dimension of the response variable (Y). Yoo and Cook (2008) introduced a response dimension reduction method that preserves information about the conditional mean E(Y | X). Building upon this foundational work, Yoo (2018) proposed two semi-parametric methods, principal response reduction (PRR) and principal fitted response reduction (PFRR), then expanded these methods to unstructured principal fitted response reduction (UPFRR) (Yoo, 2019). This paper reviews these four response dimension reduction methodologies mentioned above. In addition, it introduces the implementation of the mbrdr package in R. The mbrdr is a unique tool in the R community, as it is specifically designed for response dimension reduction, setting it apart from existing dimension reduction packages that focus solely on predictors.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.19 no.38
• /
• pp.117-129
• /
• 1996

This Study intends to analysis what 3 factors, which are indices of Capital, Labor and Distribution, really affect to Value-Added Productivity through Statistical Analysis. For this, We selected 12 indices of Value-Added from the edition of 'Annual report of Korean companies' published in 'Korea Investors Service., Inc', especially in parts of Chemicals and Chemical products of total 85 companies. Using this data, Multivariate Statistical Analysis such as Principal Component Analysis, Factor Analysis, Covariance Structure Analysis is taken for modeling the effect of 3 factor(Labor Productivity, Capital Productivity and the Index of Distribution) on Value-Added Productivity.

• Geophysics and Geophysical Exploration
• /
• v.1 no.3
• /
• pp.170-175
• /
• 1998

A systematic methodology is developed for the prediction of the lithology using electrofacies classification from wireline log data. Multivariate statistical techniques are adopted to segment well log measurements and group the segments into electrofacies types. To consider corresponding contribution of each log and reduce the computational dimension, multivariate logs are transformed into a single variable through principal components analysis. Resultant principal components logs are segmented using the statistical zonation method to enhance the quality and efficiency of the interpreted results. Hierarchical cluster analysis is then used to group the segments into electrofacies. Optimal number of groups is determined on the basis of the ratio of within-group variance to total variance and core data. This technique is applied to the wells in the Korea Continental Shelf. The results of field application demonstrate that the prediction of lithology based on the electrofacies classification works well with reliability to the core and cutting data. This methodology for electrofacies determination can be used to define reservoir characterization which is helpful to the reservoir management.

• Computers and Concrete
• /
• v.13 no.2
• /
• pp.173-185
• /
• 2014

Multivariate analysis is a statistical technique that investigates relationship between multiple predictor variables and response variable and it is a very commonly used statistical approach in cement and concrete industry. During model building stage, however, many predictor variables are included in the model and possible collinearity problems between these predictors are generally ignored. In this study, use of partial least squares (PLS) analysis for evaluating the relationships among the cement and concrete properties is investigated. This regression method is known to decrease the model complexity by reducing the number of predictor variables as well as to result in accurate and reliable predictions. The experimental studies showed that the method can be used in the multivariate problems of cement and concrete industry effectively.