• 한국전산유체공학회지
• /
• 제7권4호
• /
• pp.35-41
• /
• 2002

The projectile afterbodies for zero-lift drag reduction has been analyzed using the Navier-Stokes equations with the κ-εturbidence model. The numerical method of a second order upwind scheme has been used on an unstructured adaptive grid system. Base drag reduction methods that have been found effective on axisymmetric bodies are boattailing, base bleed, base combustion, locked vortex afterbodies and multistep afterbodies. In this paper, turbulence flow and pressure charateristics have been studied for geometries of multistep afterbodies. The important geometrical and flow parameters relevant to the design of such afterbodies have been identified by step number, length and height. The flow over multistep aftoerbodies or base have many kinds of compressible flow characteristics including expansion waves at the trailing edge, recompression waves, separation and recirculating flow in the base region, shear flow and wake flow. The numerical results have been compared and analyzed with the experimental data. The flow characteristics have been clearly shown.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2001년도 춘계 학술대회논문집
• /
• pp.60-65
• /
• 2001

The projectile afterbodies for zero-lift drag reduction has been analyzed using the Navier-Stokes equations with the $\kappa-\epsilon$ turbulence model. The numerical method of a second order upwind scheme has been used on unstructured adaptive meshes. Base drag reduction methods that have been found effective on axisymmetric bodies include boattailing, base bleed, base comustion, locked vortex afterbodies and multistep afterbodies. In this paper, the charateristics of turbulence flow have been studied for geomeries of multistep afterbodies. The important geometrical and flow parameters relevant to the design of such afterbodies have been identified by number, length and height of step. The flow over multistep afterbodies has been analyzed including expansion waves, recompression waves, recirculating flow, shear flow and wake flow. The numerical results have been compared and analyzed with the experimental datum.

• 전자공학회논문지B
• /
• 제29B권1호
• /
• pp.85-93
• /
• 1992

In this paper, we propose a parameter-free smoothing method for speckle images, i.e., an adaptive least squares image smoothing technique implemented in a multistep environment. The pertinent smoothing window size at a given pixel is determined by the discontinuity measure which is defined by the ratio of the local variance and mean squares of intensity values of pixels over the smoothing window centered there. The mode of the discontinuity measure at each step is estimated to replace the noise variance parameter that is required in the adaptive smoothing. Computer simulation shows that the proposed multistep technique can smooth homogeneous regions satisfactorily while preserving fine details near boundaries.

• 한국지반공학회논문집
• /
• 제19권4호
• /
• pp.121-131
• /
• 2003

도심지에서 열악한 지반조건에서의 터널 시공을 때때로 불가피 하다. 터널의 안정성 증대와 인접 구조물의 손상을 방지하기 위하여 지반 개량과 보강이 요구된다. 이러한 목적을 달성하기 위해 보조 공법으로 강관 다단 그라우팅은 근래에 국내의 터널 현장에 적용되고 있다. 본 연구에서는 강관 다단 그라우팅으로 보강된 터널의 막장 안정성을 평가하였다. 건조한 지반에서는 지보압이 강관 다단 그라우팅으로 인해 크게 감소하지 않으나 지하수위 하에서 터널시공 시 터널 막장에 발생하게 되는 침투수력은 상대적으로 크게 감소하였다. 투수계수의 이방성이 터널 막장에 작용하는 침투수력에 미치는 영향은 역학해석과 지하수 흐름해석의 연계해석을 통하여 검토되었다. 수직방향에 비해 수평방향의 투수계수가 큰 경우 터널 막장에 작용하는 침투수력은 감소하였다.

• 한국결정학회지
• /
• 제14권1호
• /
• pp.35-38
• /
• 2003

증기-확산 단백질 결정화의 물-증발 속도를 조절하기 위해서, 간결한 모세관 내의 다중-단계 농도 장착법 (multistep-concentration setting in capillaries) 이 이용되었다. “조절 용액 (regulatory solution)”이라고 일컬어지는 2차 침전 용액이 이용되어, 이 방법으로 다양한 증발 속도 곡선들이 얻어졌다. 이때, 조절 용액은 단백질 용액에 직접적으로 노출되지 않는다. 모델 단백질인 lysozyme의 결정화에 이 그래프들이 적용되었다. 결정 성장은 증발속도에 달려있다는 것을 실험 결과들이 명백하게 보여주었다. 특히나. 단백질 용액의 침전 농도가 어떤 점까지 증가하다가 평형 농도로 줄어드는 decoupling 곡선이 가장 좋은 결정들을 만들어냈다.

• 제어로봇시스템학회논문지
• /
• 제14권9호
• /
• pp.916-924
• /
• 2008

In this paper dynamic modeling parameters were estimated using a frequency domain estimation method. A systematic flight test method was employed using preprogrammed multistep excitation of the swashplate control input. In addition when one axis is excited, the autopilot is engaged in the other axis, thereby obtaining high-quality flight data. A dynamic model was derived for a small scale unmanned helicopter (CNUHELI-020, developed by Chungnam National University) equipped with a Bell-Hiller stabilizer bar. Six degree of freedom equations of motion were derived using the total forces and moments acting on the small scale helicopter. The dynamics of the main rotor is simplified by the first order tip-path plane, and the aerodynamic effects of fuselage, tail rotor, engine, and horizontal/vertical stabilizer were considered. Trim analysis and linearized model were used as a basic model for the parameter estimation. Doublet and multistep inputs are used to excite dynamic motions of the helicopter. The system and input matrices were estimated in the frequency domain using the equation error method in order to match the data of flight test with those of the dynamic modeling. The dynamic modeling and the flight test show similar time responses, which validates the consequence of analytic modeling and the procedures of parameter estimation.

• 한국환경과학회지
• /
• 제14권5호
• /
• pp.513-520
• /
• 2005

For the destruction of toxic chlorinated organic compounds, this study proposes improved supercritical water oxidation method (multistep oxidation) using sodium nitrate as an oxidizer. This method solves the problems involved in the existing supercritical water oxidation method. Multistep oxidation means that $NaNO_3$ is oxidized to $N_2\;via\;NaNO_2$ and NO. Toxic and hard to destroy organic substances like para-dichlorobenzen(4-DCBz), polychlorinate biphenyl(PCB) ware oxidized to non toxic substances in a condition, in which rapid pressure and temperature rise is restrained as much as possible. 4-dichlorobenzene(4-DCBz) and Polychlorinate biphenyl(PCB) in condition$(450^{\circ}C,\;p_w=0.25g/cm^3,\;30min)$ Was discomposed perfectly.

• 전기학회논문지
• /
• 제63권2호
• /
• pp.250-256
• /
• 2014

In this study, we deposited and investigated ${\mu}c$-Si:H thin films prepared by Plasma Enhanced Chemical Vapor Deposition(PECVD) system. To deposition silicon thin films, we controlled $SiH_4$ gas concentration, RF input power, and heater temperature. According to the experiments, the more $SiH_4$ gas concentration increased, deposition rate also increased but crystalline property decreased at the same conditions. In the RF input power case, deposition rate and crystalline property increased together when the input power increased from 100[W] to 300[W]. If RF input power was 300[W], deposition rate has reached saturation point. In the heater temperature, deposition rate increased when heater temperature increased. Crystalline property maintained a certain level until heater temperature was $250[^{\circ}C]$. And then it was a suddenly increased. Multistep method has been proposed to improve the quality of ${\mu}c$-Si:H thin film. $SiH_4$ gas was injected with a time interval. According to the experiments, crystallite ratio improve about 20~60[%] and photo conductivity increased up to six times.

• 한국진공학회지
• /
• 제2권4호
• /
• pp.474-479
• /
• 1993

Submicron contact hole filling with aluminum alloys has been achieved with a multistep metallization method, which utilizes a metal " flow" or self-diffusion process at elevated temperatures after the metal was sputter-deposited. A multi-chamber, modular sputtering system was employed to deposit aluminum alloys and subsequently to anneal the deposited metal films under vacuum at high temperatures. The film were deposited on 200 mm wafers with planar, dc magnetron sputtering sources without anysubstrate bias. The basic process steps studied for the multistep metallization include an initial layer deposition at low temperatures less than $100^{\circ}C$, and an annealin gstep at elevated temperatures, between 450 and $550^{\circ}C$. The degree of planarization or step coverage was dependent strongly upon the temperature and time of the flow step and complete filling of the submicron contacts with aluminum alloys was achieved. Responsible mechanisms for the enhancement in step coverge and factros determining uniform and reproducible flow of aluminum alloys during the high temperauture step are discussed.discussed.

• 소성∙가공
• /
• 제9권6호
• /
• pp.638-643
• /
• 2000

This study Is concerned with the development of design support program for deep drawing process. The present support program is designed to generate the layout drawings by utilizing the following key functions: analysis of product shape, generation of key stages by pattern database, determination of layout generation method, generation of layout. furthermore, from the results by process design program input data for simulation Is automatically generated with appropriate process parameters and connected seamlessly to carry out the finite element analysis so that the design can be checked for the possible problems in real manufacturing process. The designer can generate layout drawings and test the design by simulation quickly and conveniently In these system designer can verify and optimize the design. We tested this system for various type of product shape md found that the generated layout is in good agreement with the real cases.