• 한국측량학회지
• /
• 제36권5호
• /
• pp.413-422
• /
• 2018

Many applications using satellite data from high-resolution multispectral sensors require an image fusion step, known as pansharpening, before processing and analyzing the multispectral images when spatial fidelity is crucial. Image fusion methods are to improve images with higher spatial and spectral resolutions by reducing spectral distortion, which occurs on image fusion processing. The image fusion methods can be classified into MRA (Multi-Resolution Analysis) and CSA (Component Substitution Analysis) approaches. To suggest the efficient image fusion method for Pleiades and KOMPSAT (Korea Multi-Purpose Satellite) 3 satellites, this study will evaluate image fusion methods for multispectral and panchromatic images. HPF (High-Pass Filtering), SFIM (Smoothing Filter-based Intensity Modulation), GS (Gram Schmidt), and GSA (Adoptive GS) were selected for MRA and CSA based image fusion methods and applied on multispectral and panchromatic images. Their performances were evaluated using visual and quality index analysis. HPF and SFIM fusion results presented low performance of spatial details. GS and GSA fusion results had enhanced spatial information closer to panchromatic images, but GS produced more spectral distortions on urban structures. This study presented that GSA was effective to improve spatial resolution of multispectral images from Pleiades 1A and KOMPSAT 3.

• 한국측량학회지
• /
• 제33권3호
• /
• pp.211-218
• /
• 2015

The analysis of remote sensing data depends on sensor specifications that provide accurate and consistent measurements. However, it is not easy to establish confidence and consistency in data that are analyzed by different sensors using various radiometric scales. For this reason, the cross-calibration method is used to calibrate remote sensing data with reference image data. In this study, we used an airborne hyperspectral image in order to calibrate a multispectral image. We presented an automatic cross-calibration method to calibrate a multispectral image using hyperspectral data and spectral mixture analysis. The spectral characteristics of the multispectral image were adjusted by linear regression analysis. Optimal endmember sets between two images were estimated by spectral mixture analysis for the linear regression analysis, and bands of hyperspectral image were aggregated based on the spectral response function of the two images. The results were evaluated by comparing the Root Mean Square Error (RMSE), the Spectral Angle Mapper (SAM), and average percentage differences. The results of this study showed that the proposed method corrected the spectral information in the multispectral data by using hyperspectral data, and its performance was similar to the manual cross-calibration. The proposed method demonstrated the possibility of automatic cross-calibration based on spectral mixture analysis.

• 대한원격탐사학회지
• /
• 제24권3호
• /
• pp.257-266
• /
• 2008

This study presents an approach to synthesize multispectral images at a higher resolution by exploiting a high-resolution image acquired in panchromatic modality. The synthesized images should be similar to the multispectral images that would have been observed by the corresponding sensor at the same high resolution. The proposed scheme is designed to reconstruct the multispectral images at the higher resolution with as less color distortion as possible. It uses a regression model of the second order to fit panchromatic data to multispectral observations. Based on the regression model, the multispectral images at the higher spatial resolution of the panchromatic image are optimized by a quadratic programming. In this study, the new method was applied to the IKONOS 1m panchromatic and 4m multispectral data, and the results were compared with them of several current approaches. Experimental results demonstrate that the proposed scheme can achieve significant improvement over other methods.

• 대한원격탐사학회지
• /
• 제24권5호
• /
• pp.525-533
• /
• 2008

This study presents a pansharpening method, so called FitPAN, to synthesize multispectral images at a higher resolution by exploiting a high-resolution image acquired in panchromatic modality. FitPAN is a modified version of the quadratic programming approach proposed in (Lee, 2008), which is designed to generate synthesized multispectral images similar to the multispectral images that would have been observed by the corresponding sensor at the same high resolution. The proposed scheme aims at reconstructing the multispectral images at the higher resolution with as less spectral distortion as possible. This study also proposes a sharpening process to eliminate some distortions appeared in the fused image of the higher resolution. It employs the Point-Jacobian MAP iteration utilizing the contextual information of the original panchromatic image. In this study, the new method was applied to the IKONOS 1m panchromatic and 4m multispectral data, and the results were compared with them of several current approaches. Experimental results demonstrate that the proposed scheme can achieve significant improvement in both spectral and block distortion.

• 경영과정보연구
• /
• 제1권
• /
• pp.401-412
• /
• 1997

Traditionally, classification of remote sensed image data is one of the important works for image data analysis procedure. So, many researchers have been devoted their endeavor to increasing accuracy of analysis, also, many classification algorithms have been proposed. In this paper, we propose new bands selection method for multispectral bands of remote sensed image data that use rough set theory. Using indiscernibility relations in rough sets, we show that can select the efficient bands of multispectral image data, automatically.

• 대한원격탐사학회지
• /
• 제22권2호
• /
• pp.101-110
• /
• 2006

본 연구에서는 항공 관측으로 얻어진 다중분광영상과 LIDAR (LIght Detection And Ranging) 자료를 이용하여 농업지역의 토지피복 분류 정도를 분석하였다. 다중분광영상은 녹색, 적색, 근적외역의 3분광으로 이루어져 있다. LIDAR 벡터 자료로부터 최초 반사강도 영상과 최초 반사 표고 자료와 최후 반사의 지상 표고 자료의 차이로 산출된 식생 높이 영상이 얻어졌다. 토지피복 분류 방법은 최대우도법을 사용했으며, 다중분광영상의 3밴드 영상 LIDAR의 반사강도 영상, 식생 높이 영상을 이용하였다. 모든 영상을 이용한 토지피복 분류의 전체 정도는 85.6%로 다중분광영상만을 이용한 정도보다 10%이상 향상되었다. 여러 농작물간의 높이의 차이, 수목과 농작물 높이의 차이와 LIDAR 반사강도 차이로 인하여 다중분광영상과 LIDAR 영상을 사용한 토지피복 분류의 정도가 향상되었다.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2008년도 International Symposium on Remote Sensing
• /
• pp.18-21
• /
• 2008

Lee (2008) proposed the pansharpening method to reconstruct at the higher resolution the multispectral images which agree with the spectral values observed from the sensor of the lower resolution values. It outperformed over several current techniques for the statistical analysis with quantitative measures, and generated the imagery of good quality for visual interpretation. However, if a small object stretches over two adjacent pixels with different spectral characteristics at the lower resolution, the pixels of the object at the higher resolution may have different multispectral values according to their location even though they have a same intensity in the panchromatic image of higher resolution. To correct this problem, this study employed an iterative technique similar to the image restoration scheme of Point-Jacobian iterative MAP estimation. The effect of pansharpening on image segmentation/classification was assessed for various techniques. The method was applied to the IKONOS image acquired over the area around Anyang City of Korea.

• 대한원격탐사학회지
• /
• 제23권6호
• /
• pp.547-552
• /
• 2007

본 연구에서는 고해상도의 panchromatic 영상을 이용하여 저해상도의 multispectral 영상을 고해상도로 재구축하는 방법을 제시하고 있다. 제안된 방법은 저해상도와 고해상도 간의 선형 모형 사용하여 실제의 spectral 값에 부합하는 고해상도 영상을 재구축하며 두 단계로 이루어 진다. 첫 단계는 고해상도 feature와 연관된 저해상도의 선형 모형을 이용하여 최소 자승 오류 법에 의한 global 추정 과정이고 두 번째 단계는 재구축된 영상을 지역적으로 원래의 spectral 값과 일관되게 만드는 local 수정 과정이다. 본 연구에서 제안 방법을 이용하여 6m KOMPSAT-1 EOC 자료와 30m LANDSAT ETM+에 적용하였고 또한 IKONOS 1m RGB 영상 생성하였다. 실험 결과는 새로이 제시된 방법이 저해상도 Multispectral 영상의 고해상도 재구축에 탁월한 성능을 가지고 있음을 보여주었다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(4)
• /
• pp.31-34
• /
• 2000

In this paper, we proposed multispectral image compression method using CIP (classified inter-channel prediction) and SVQ (selective vector quantization) in wavelet domain. First, multispectral image is wavelet transformed and classified into one of three classes considering reflection characteristics of the subband with the lowest resolution. Then, for a reference channel which has the highest correlation with other channels, the variable VQ is performed in the classified intra-channel to remove spatial redundancy. For other channels, the CIP is performed to remove spectral redundancy. Finally, the prediction error is reduced by performing SVQ. Experiments are carried out on a multispectral image. The results show that the proposed method reduce the bit rate at higher reconstructed image quality and improve the compression efficiency compared to conventional method.

• 대한원격탐사학회:학술대회논문집
• /
• 대한원격탐사학회 2005년도 Proceedings of ISRS 2005
• /
• pp.138-141
• /
• 2005

In this paper, we propose a watermarking technique of multispectral images. In our method, the Principal Component Analysis (PCA) is preliminarily applied on the multispectral image. The most principal component image is used for embedding with a watermark, which is a pseudo-random number sequence generated with a secret key. The embedding process is performed in the wavelet domain. The resulting image is then reinserted into the principal component images, and the final multispectral image containing the watermark can be produced by the inverse PCA. Experimental results are provided to illustrate the performance of the algorithm against various kinds of attacks.