• The Journal of the Acoustical Society of Korea
• /
• v.32 no.1
• /
• pp.86-94
• /
• 2013

In this paper, we propose a network coding scheme that is one of the most promising techniques for overcoming transmission errors in underwater acoustic communications. It is assumed that the proposed scheme operates in a Code Division Multiple Access (CDMA) network where multiple sensor nodes share the underwater acoustic channel in both the frequency and the time domains by means of orthogonal codes. The network topology deploys multi-hop transmission with relaying between multiple source nodes and one destination node via multiple relay nodes. The proposed scheme is evaluated in terms of the successful packet delivery ratio of end-to-end transactions under varying packet loss rates. A computer simulation shows that the successful delivery ratio is maintained at over 95% even when the packet loss rate reaches 50%.

• Journal of Communications and Networks
• /
• v.17 no.4
• /
• pp.419-427
• /
• 2015

There have been increases in the elderly population worldwide, and this has been accompanied by rapid growth in the health-care market, as there is an ongoing need to monitor the health of individuals. Wireless body area networks (WBANs) consist of wireless sensors attached on or inside the human body to monitor vital health-related problems, e.g., electrocardiograms (ECGs), electroencephalograms (EEGs), and electronystagmograms (ENGs). With WBANs, patients' vital signs are recorded by each sensor and sent to a coordinator. However, because of obstructions by the human body, sensors cannot always send the data to the coordinator, requiring them to transmit at higher power. Therefore, we need to consider the lifetime of the sensors given their required transmit power. In the IEEE 802.15.6 standard, the transmission topology functions as a one-hop star plus one topology. In order to obtain a high throughput, we reduce the transmit power of the sensors and maintain equity for all sensors. We propose the multiple-hop transmission for WBANs based on the IEEE 802.15.6 carrier-sense multiple-access with collision avoidance (CSMA/CA) protocol. We calculate the throughput and variance of the transmit power by performing simulations, and we discuss the results obtained using the proposed theorems.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.19 no.4
• /
• pp.605-613
• /
• 1994

In this paper, we evaluate performance of multiple access for distributed wireless communication network by CSMA protocol. It is envident that the existence of hidden node in an environment degrades the performance of CSMA. In order to improve performance due to the problem of hidden node, the previous paper used random multiple access protocols a as such as ISMA, BTMA, BCMA. In this paper, We propose a protocol that we can improve performance by allowing node to sense the carrier of any other transmission on the channel in the distributed wireless communication networks The probability of transmission success was obtained by steady stats analysis under given assumptions. We confirmed that hidden node problem be virtually elimated by using a new protocol.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.17 no.5
• /
• pp.643-653
• /
• 2014

High-capacity video, control and situation awareness data should be transmitted efficiently to control robots properly in the ground unmanned system, which requires the technology maximizing the communication range and the data transmission throughput. This technology is connected to the OFDMA(Orthogonal Frequency Division Multiple Access)-MIMO(Multiple Input Multiple Output) transmission technology under the limited bandwidth and transmission power. In this paper, we design MIMO communication system for ground unmanned systems, and investigate the data reception performance experimentally, comparing with SISO(Single Input Single Output) system. Experiment results show that the data reception performance of MIMO is significantly improved compared to that of SISO, e.g. 4dB gain of sensitivity and 5dB of SNR at the value MPR = 1, for the mobile stations with $2{\times}2$ STBC diversity.

• Journal of Convergence for Information Technology
• /
• v.10 no.11
• /
• pp.23-29
• /
• 2020

As IoT devices increase exponentially, minimizing MIMO interference and increasing transmission capacity for sending and receiving IoT information through multiple antennas remain the biggest issues. In this paper, secret key-level distribution mechanism using deep learning is proposed to minimize MIMO-based IoT communication noise. The proposed mechanism minimizes resource loss during transmission and reception process by dispersing IoT information sent and received through multiple antennas in batches using deep learning. In addition, the proposed mechanism applied a multidimensional key distribution processing process to maximize capacity through multiple antenna multiple stream transmission at base stations without direct interference between the APs. In addition, the proposed mechanism synchronizes IoT information by deep learning the frequency of use of secret keys according to the number of IoT information by applying the method of distributing secret keys in dimension according to the number of frequency channels of IoT information in order to make the most of the multiple antenna technology.

• Journal of Korea Society of Industrial Information Systems
• /
• v.25 no.2
• /
• pp.29-37
• /
• 2020

This paper proposes a multiple-relay-assisted single side band (SSB) space frequency block code (SFBC) single carrier (SC)-frequency division multiple access (FDMA) system and measures the performance of SSB SFBC SC-FDMA transmission system with the signal-to-noise power ratio SNR) between relays and a destination station. As we know, the performance of relay-assisted transmission systems can be easily improved by re-transmitting to the destination station after applying block code to the recovered transmitted signals of relays. In this paper, the performance improvement of the relay-assisted SSB SC-FDMA system can be obtained without any significant increase of system computational complexity by implementing block code with the complex conjugates symmetric characteristic of SSB system. The simulation result shows that the SNR performance of the proposed multiple-relay-assisted SSB SFBC SC-FDMA system is about 4 dB better than the performance of the single-relay-assisted SSB SC-FDMA system at the symbol error rate of 10^-2.

• Applied Microscopy
• /
• v.42 no.3
• /
• pp.151-157
• /
• 2012

The microstructure of various shapes of stacking fault pyramids (SFPs) formed in multiple implant/anneal Separation by Implanted Oxygen (SIMOX) material were investigated by plan-view and cross-sectional transmission electron microscopy. In the multiple implant/anneal SIMOX, the defects in the top silicon layer are confined at the interface of the buried oxide layer at a density of ${\sim}10^6\;cm^{-2}$. The dominant defects are perfect and imperfect SFPs. The perfect SFPs were formed by the expansion and interaction of four dissociated dislocations on the {111} pyramidal planes. The imperfect SFPs show various shapes of SFPs, including I-, L-, and Y-shapes. The shape of imperfect SFPs may depend on the number of dissociated dislocations bounded to the top of the pyramid and the interaction of Shockley partial dislocations at each edge of {111} pyramidal planes.

• Journal of the Institute of Electronics Engineers of Korea TC
• /
• v.47 no.2
• /
• pp.40-46
• /
• 2010

Multi-user MIMO (Multiple-Input Multiple-Output) systems require collaborative PF schedulers to improve the performance of the log sum of average transmission rates. While the performance of single cell based conventional PF schedulers has been evaluated over various channel conditions, scheduling algorithms by multiple base stations which select multiple users over a given time frame and their performance require further investigations. In this paper, we apply a collaborative PF scheduler to the distributed multi-user MIMO system, which assigns radio resources to multiple users by exchanging user channel information from base stations located in three adjacent sectors. We further evaluate its performance in terms of the log sum of average transmission rates. The performance is compared to that of the full-search collaborative PF scheduler which searches over all possible combinations of user groups, and that of a parallel PF scheduler that determines users without channel information exchange among base stations. We show the log sum of average transmission rates of the collaborative PF scheduler outperforms that of the parallel PF scheduler in low percentile region. In addition, the collaborative PF scheduler exhibits a negligible performance degradation when compared to the full-search collaborative PF scheduler while a significant reduction of the computational complexity is achievable at the same time.

• Proceedings of the IEEK Conference
• /
• summer
• /
• pp.10-14
• /
• 2004

When providing flexible data transmission for future CDMA(Code Division Multiple Access) cellular networks, problems arise in two aspects: transmission rate. This paper has proposed an approach to maximize the cellular network capacity by combining the genetic transmission rate allocation and a rapid power control algorithm. We present a genetic chromosome representation to express call drop numbers and transmission rate to control mobile's transmission power levels while handling their flexible transmission rates. We suggest a rapid power control algorithm, which is based on optimal control theory and Steffenson acceleration technique comparing with the existing algorithms. Computer simulation results showed effectiveness and efficiency of the proposed algorithm Conclusively, our proposed scheme showed high potential for increasing the cellular network capacity and it can be the fundamental basis of future research.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.21 no.7
• /
• pp.1291-1298
• /
• 2017

In this paper, we propose a decoding method that improves the transmission rate and reliability by integrating MIMO(Multiple Input Multiple Output) communication scheme using turbo code and FTN(Faster Than Nyquist) scheme among high rate and high reliability wireless communication schemes in wireless communication. The existing MIMO-FTN(Multiple Input Multiple Output-Faster Than Nyquist) scheme based on hierarchical space-time coded method induced data rate loss due to the application of the space-time trellis coding scheme to remove adjacent symbol interference due to FTN scheme. To solve these problems, this paper proposes a method using W-ZF(Weighted-Zero Forcing) which overcomes the disadvantages of ZF(Zero Forcing) scheme in MIMO-FTN scheme using ZF scheme. In this paper, we compared the performance and the transmission rate of the MIMO-FTN scheme based on the hierarchical space-time coding, the MIMO-FTN scheme using W-ZF and the SISO-FTN scheme. As a result, the MIMO-FTN scheme using the W-ZF scheme is two times better than the other two schemes.