• JSTS:Journal of Semiconductor Technology and Science
• /
• 제14권3호
• /
• pp.300-312
• /
• 2014

A single-inductor multiple-output (SIMO) DC-DC converter providing buck and boost outputs with a new switching sequence is presented. In the proposed switching sequence, which does not require any additional blocks, input energy is delivered to outputs continuously by flowing current through the inductor, which leads to high conversion efficiency regardless of the balance between the buck and boost output loads. Furthermore, instead of multiple output loop compensation, only the freewheeling current feedback loop is compensated, which minimizes the number of off-chip components and nullifies the need for the equivalent series resistance (ESR) of the output capacitor for loop compensation. Therefore, power conversion efficiency and output voltage ripples can be improved and minimized, respectively. Implemented in a 0.35-${\mu}m$ CMOS, the proposed SIMO DC-DC converter achieves high conversion efficiency regardless of the load balance between the two outputs with maximum efficiency reaching up to 82% under heavy loads.

• 원예과학기술지
• /
• 제34권5호
• /
• pp.779-789
• /
• 2016

국내외에서 보고된 저항성 유전자원과 새로 찾은 자원을 포함한 고추 유전자원 총 33점에 세균성점무늬병원균(X. euvesicatoria)을 접종하여 과민반응형 저항성과 일반 저항성을 검정하고, 선발한 자원에 대하여 원예적 특성을 조사하였다. 국내에 보고된 4종의 race(1, 3, 7, 8)에 대한 과민반응형 저항성을 판별한 결과, Bs2 유전자를 보유한 KC00939와 Chilbok No.2는 예상대로 4종의 race에 과민형 반응을 나타내었다. Bs3 유전자를 보유한 Chilbok No.3는 예상대로 race 1과 7에 과민형 반응을 보였다. KC00939는 CMV와 BBWV의 복합 감염에 강한 저항성을 보이고 색소함량이 매우 높아 고색도 복합저항성 육종 소재로서의 그 가치가 높았다. 이와 더불어 KC01327, KC01617, KC01015, KC01760, KC01779, KC01137, KC01328, KC01006, KC00127(PI369994), KC01704, KC00995, KC00131(PI369998) 및 KC01777이 높은 수준의 일반 저항성을 나타내었다. 이들 중 KC01617, KC01760, KC01779, KC01137, KC01704, KC01777은 이번 연구에서 세균성점무늬병 저항성으로 찾은 자원이다. 이들 세균성점무늬병 저항성 유전자원의 CMV와 BBWV의 복합 감염에 대한 저항성, 과실특성, 과실의 신미, 감미 및 색소함량(ASTA)을 분석한 결과는 세균성점무늬병 저항성 육종에 유용하게 활용될 것으로 기대된다

• 대한임상검사과학회지
• /
• 제48권3호
• /
• pp.202-209
• /
• 2016

본 연구는 methicillin-resistant Staphylococcus aureus(MRSA)로부터, 독소 유전자형과 항생제 내성의 상관 관계를 결정하는 것을 목표로 하였다. 2014년 1월~12월까지 전남 순천의 한 병원 중환자실의 임상검체 2,664건에서 얻어진 MRSA 52균주를 분리하였다. 유전자들이 암호화하고 있는 mecA, 장독소(staphylococcal enterotoxins; sea, seb, sec, seg, seh, sei, sej), 독성 쇼크 증상독소-1 (toxic shock syndrome toxin-1; tst-1), 표피박탈성독소(exfoliative toxin; eta, etb), 백혈구 용해 독소(Panton-Valentine leukocidin; pvl)를 특이적 프라이머를 이용한 multiplex PCR로 증폭 검출 하였다. 독소 유전자 seg와 sei 유전자가 각각 40균주(76.9%)로 가장 많은 보유율을 나타냈으며 다음으로 tst 34균주(65.4%) 순으로 검출 되었으며 eta, etb, sea, sed, see, seh, sej와 pvl 유전자들은 검출 되지 않았다. 2개 이상의 독소 유전자를 동시에 보유한 조합의 MRSA는 40균주(76.9%) 였는데 5개 유전자(seb, sec, seg, sei, tst)를 동시 보유한 조합이 28균주(53.8%)로 가장 많은 분포를 보였으며 다음으로 seg, sei 유전자 동시 보유 조합으로 6균주(11.5%)에서 나타났다. 유전자들 간의 동시 보유율은 72.5~100%로서 특정한 독소 유전자 seb, sec, seg, sei와 tst 유전자간의 상관성이 높게 나타났다. 특정 다수의 독소유전자(seb, sec, seg, sei, tst)를 동시에 보유한 균주들이 개별적 독소 유전자를 보유한 균주(seb, sec, tst)와의 항생제 내성의 상관성은 ciprofloxacin, clindamycin, erythromycin 항생제에 100% 내성을 보임으로서 공통적으로 포함된 seb, sec, tst 유전자와 이 항생제의 내성과는 밀접한 연관이 있음을 알았다.

• 한국어병학회지
• /
• 제7권1호
• /
• pp.37-46
• /
• 1994

서해안 일원의 가온 양만장 사육조로부터 분리한 E. tarda균에 대한 약제내성검사 및 내성균의 내성인자 전달 시험을 실시하였다. 공시한 항생제에 대한 내성률은 LM, PM, SD, SF 등에는 100%, AP, CH, SM, OT 및 CP 등에는 89% 이상, OA 및 KM에는 70% 정도 그리고 AK, GM 및 EF 등에는 30% 이하의 내성률을 보였으며, 이와같은 내성률은 각 양만장에서 분리한 균주간에 차이를 보이지 않았다. 내성유형은 총 34유형으로 모든 분리균주가 8~14제의 다제내성을 보였으며, 그 중 LM PM SD SF CP CH SM OT AP OA KM(22주, 21.4%) 및 LM PM SD SF CP CH SM OT AP OA(12주, 11.7%) 유형등이 고빈도로 출현하였다. 내성균의 내성인자 전달유형은 총 55형으로 단제에서 13제까지의 다양한 내성인자가 전달되었는데, 그 중 LM PM SD SF CP CH SM OT AP OA(10주. 10%), LM PM SD SF CP CH SM OT AP OA KM(7주, 7%) 및 LM PM SD SF CP CH AP OA(7주, 7%) 등의 다제내성유형이 고빈도의 전달률을 보였으며, 약재별로는 GM, EF 및 AK 등에는 저빈도(0~20%), OT, SM, KM 및 OA 등에는 중등도(49~62%), AP, PM, LM, SF, CP, CH 및 SD 등에는 고빈도(71~94%)로 내성인자를 전달하였다.

• The Journal of Advanced Prosthodontics
• /
• 제1권2호
• /
• pp.85-90
• /
• 2009

STATEMENT OF PROBLEM. Over the years, resin-bonded fixed partial dentures (RBFPDs) have gone through substantial development and refinement. Several studies examined the biomechanics of tooth preparation and framework design in relation to the success rate of RBFPDs and considered retention and resistance form essential for increase of clinical retention. However, these criteria required preparations to be more invasive, which violates not only the original intentions of the RBFPD, but may also have an adverse effect on retention due to loss of enamel, an important factor in bonding. PURPOSE. The object of this in vitro study was to compare the dislodgement resistance of the new types of RBFPDs, the conventional three-unit fixed partial denture, and conventional design of RBFPD (Maryland bridge). MATERIAL AND METHODS. Fifty resin mandibular left second premolars and second molars were prepared on dentiforms, according to the RBFPD design. After model fabrication (five group, n = 10), prostheses were fabricated and cemented with zinc phosphate cement. After cementation, the specimens were subjected to tensile loading at a cross head speed of 4 mm/min in a universal testing machine. The separation load was recorded and analyzed statistically using one-way analysis of variance followed by Duncan's multiple range test. RESULTS. Group V, the pin-retained RBFPDs, had the highest mean dislodgement resistance, whereas specimens of group II, the conventional RBFPDs, exhibited a significantly lower mean dislodgement resistance compared to the other 4 groups (P <.05). There were no significant differences between group I, III, and IV in terms of dislodgement resistance (P>.05). Group V had the highest mean MPa (N/$mm^2$) (P <.05). There was no significant difference between groups I, II, III and IV (P > .05). CONCLUSION. Within the limits of the design of this in vitro study, it was concluded that: 1. The modified RBFPDs which utilizes the original tooth undercuts and requires no tooth preparation, compared with the conventional design of RBFPDs, has significantly high dislodgement resistance (P < .05). 2. The modified RBFPDs which utilizes the original tooth undercuts and requires minimal tooth preparation, compared with the conventional FPDs, has significantly no difference in retention and dislodgement resistance)(P>.05). 3. The pin-retained FPDs showed a high dislodgement resistance compared to the conventional three-unit FPDs (P<.05).

• 생명과학회지
• /
• 제13권4호
• /
• pp.375-382
• /
• 2003

본 연구는 콩 cyst 선충 race 14에 대한 저항성 QTLs 구명을 목적으로 한 바 결과를 요약하면 다음과 같다. 1. 회귀분석 결과 30개의 marker들(29 RAPD, 1 RFLP)에서 cyst 선충 race 14의 저항성에 대한 유의성이 인정되었다. 2. MAPMAKER/QTL 분석 결과 2개의 QTL들이 구명되었는데, 이 QTL들은 2개의 linkage groups (LGC-7와 LGC-9)에 위치하였으며, 모두 우성유전 양상을 나타내었다. 3. 다중회귀분석 결과 2개의 marker들($B15^2$와 $H06^1$)로 구성된 조합에서 가장 높은 표현적 변이의 값(22.9%)을 나타내었다. 콩 cyst 선충 rare 14에 대한 표현적 변이를 충분히 설명하기 위해서는 지속적인 QTL 구명 연구가 요구된다.

• 대한임상검사과학회지
• /
• 제39권3호
• /
• pp.161-166
• /
• 2007

To develop a rapid and reliable single-tube-based PCR technique for detection simultaneously the quinolone resistance qnrA, qnrB and qnrS genes. After multiple alignment, primers were designed to detect known qnr variants. I was used for A total of 43 extented-spectrum ${\beta}$-lactamases (ESBLs) producing Escherichia coli and Klebsiella pneumoniae isolated from university hospital were tested for screening, as with qnr genes. In optimized conditions, all positive controls confirmed the specificity of the PCR primers. Out of 43 isolates, qnrA genes were detected 19 (44.2%), qnrB genes 5 (11.7%), qnrS genes 15 (34.9%) and 8 (18.6%) isolates were not detected. I report here a fast and reliable technique for rapid screening of qnr positive strains to be used for epidemiological surveys.

• 약학회지
• /
• 제52권1호
• /
• pp.33-36
• /
• 2008

Staphylococcus aureus KH13 and Staphylococcus aureus KH28 were resistant to chloramphenicol, ampicillin, clindamycin, erythromycin, gentamicin, kanamycin, streptomycin, tobramycin, and norfloxacin. A plasmid (pKH13) and two plasmids (pKH14, pKH15) were isolated from Staphylococcus aureus KH13 and Staphylococcus aureus KH28, respectively and complete nucleotide sequences of three plasmids were determined. It was found that pKH13 and pKH15 mediated chloramphenicol resistance and pKH14 was a cryptic plasmid.

• 대한전기학회논문지:전기물성ㆍ응용부문C
• /
• 제51권12호
• /
• pp.601-607
• /
• 2002

IPMC(Ionic Polymer Metal Composite)actuators were optimized for producing improved forces by changing multiple parameters including repetition of number of plating, surface electroding and additive(PVP)-treatment on reduction. The platinum electrode is deposited on the surface of the material where platinum particle stay in a dense form that appears to introduce a significant level of surface electrode resistance. Actuation tests were performed for such IPMC actuators under a low voltage. The test results show that the lower surface-electrode resistance generates higher actuation capability in the IPMC actuators. In order to investigate relaxation behavior of bending and repeatability in dry condition, the IPMC was coated by$rubber(KRATON^{TM})$to minimize the effect of water evaporation from IPMC. This actuator can be used in air with surface coating to avoid membrane drying.

• Nuclear Engineering and Technology
• /
• 제32권4호
• /
• pp.372-378
• /
• 2000

The effect of alloying elements on the creep resistance of Zr alloys was investigated using thermal creep tests that were performed as a part of advanced fuel cladding development. The creep tests were conducted at 40$0^{\circ}C$ and 150 MPa for 240 hr. A statistical model was derived from the relationship between the steady-state creep rate and the content of individual alloying elements. The creep strengthening effect decreased in the following sequence : Nb, Sn, Mn, Cr, Mo, Fe and Cu. The high creep resistance of Sn and the opposite effect of Fe on zirconium alloys seem to be associated with their lowering and enhancing, respectively, the self-diffusivity of the zirconium matrix.