• Korean Journal of Food Science and Technology
• /
• v.28 no.4
• /
• pp.762-771
• /
• 1996

Chemical and sensory characteristics of kakdugi which was prepared with various radish cultivars and harvesting seasons were analyzed during 7-day storage. Average pH of small radish cultivar kakdugi was higher than that of large ones, and total acidity was lower in small ones. Reducing sugar content was the highest in kakdugi of autumn radish. Organic acids such as lactic, succinic and fumaric acid analyzed by GC increased until the third day of fermentation, whereas volatile isothiocyanates analyzed by GC/MS continued to decline. There was a significant difference in flavor characteristics of large radish kakdugi across seasons, in contrast to no significant difference in those of small radish kakdugi except sweet taste and reducing sugar content in which interaction existed between season and cultivar. Score of overall acceptability was higher in small radish than large ones with Dongja showing the highest score of overall acceptability. Overall acceptability of autumn Dongja kakdugi was positively correlated with radish kakdugi odor and sour odor, respectively, but negatively with total acidity, lactic acid content, sweet taste and pungency, respectively. By multiple regression analysis, overall acceptability in spring Dongja kakdugi is expressed as a function of overall acceptability = -0.1115 + 1.2519 savory taste + 1.5159 malic acid -0.0054 total isothiocyanate + ${\varepsilon}$.

• Korean Journal of Agricultural Science
• /
• v.11 no.1
• /
• pp.133-145
• /
• 1984

To study the effect of foaming agent on the characteristic of mortar, the tests of water-cement ratio and bulk density of mortar were done under the different mixing ratio with G. U and J foaming agents. The results obtained were summarized as follows: 1. At the mixing ratio of 1 : 4 and 0.5% of foaming agent, the highest water-cement ratio was 90% by G, 88.3% by U and 70% by J foaming agent, respectively, being lower than 91.6% of that of cement mortar. 2. At the mixing ratio of 1 : 3 and 3.0% of foaming agent, the water-cement ratio was decreased up to 22.0% by G and 24.1% by U foaming agent, respectively, but it gradually was increased in richer and poorer mixing ratio. At the mixing ratio of 1 : 4 and 3.0% of foaming agent, the water-cement ratio was decreased up to 53.1% by J foaming agent, but it gradually was increased in richer mixing ratio. 3. At the mixing ratio of 1 : 1 and 0.5% of foaming agent, the highest bulk density was $1.981g/cm^3$ by G, $1.863g/cm^3$ by U and $1.149g/cm^3$ by J foaming agent, respectively, being lower than $2.048g/cm^3$ of that of cement mortar. 4. At the mixing ratio of 1 : 2 and 3.0% of foaming agent, the bulk density was decreased up to 20.7% by G, 23.7% by U and 56.5% by J foaming agent, respectively, but it gradually was increased in richer and poorer mixing ratio. 5. The water-cement ratio and bulk density were decreased in more addition of foaming agent, respectively, multiple regression equations of water-cement ratio and bulk density were computed depending on a function of mixing ratios and addition of foaming agents.

• Magazine of the Korean Society of Agricultural Engineers
• /
• v.27 no.1
• /
• pp.46-61
• /
• 1985

This study was performed to obtain the basic data which can be applied to the use of foaming mortars. The data was based on the properties of foaming mortars depending upon various mixing ratios and addings to compare those of cement mortar. The foaming agents which was used at this experiment were pre-foamed type and mix-foaming type which is being used as mortar structures. The foaming mortar, mixing ratios of cement to fine aggregate were 1:1, 1: 2, 1 : 3 and 1 : 4. The addings of foaming agents were 0.0%, 0.5%, 1.0%, 1.5%, 2.0%, 2.5% and 3.0% of cement weight. The results obtained were summarized as follows; 1. At the mixing ratio of 1 : 1, the lowest water-cement ratios were showed by foaming mortars, respectively. But it gradually was increased in poorer mixing ratio and decreased in more addition of foaming agent. The water-cement ratios were decreased up to 1. 8~22. 0% by G, 2. 2~24. 1 % by U and 0. 7~53. 1% by J foaming mortar than cement mortar. 2, At the mixing ratio of 1 : 1, the highest bulk densities were showed by foaming mortars, respectively. But, it gradually was decreased in poorer mixing ratio and more addition of foaming agent. The bulk densities were decreased up to 1. 4~20. 7% by G, 2. 3~23. 7% by U and 26. 5~56. 5% by J foaming mortar than cement mortar. Therefore, foaming mortar could be utilized to the constructions which need low strengths. 3. At the mixing ratio of 1:1, the lowest absorption rates were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. Specially, according to the absorption rate when immersed in 72 hours, the absorption rates were showed up to 1. 01~1. 24 times by G, 1. 03~1. 58 times by U and 1. 10~5. 91 times by J foaming mortar than cement mortar. It was significantly higher at the early stage of immersed time than cement mortar. 4. At the mixing ratio of 1:1, the lowest air contents were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. Air contents were contented up to 4. 0~17. 2 times by G, 5. 2~23. 2 times by U and 23. 8~74. 5 times by J foaming mortar than cement mortar. 5. At the mixing ratio of 1 : 1, the lowest decreasing rates of strengths were showed by foaming mortars, respectively. But, it gradually was increased in poorer mixing ratio and more addition of foaming agent. Specially, the strengths of 28 days were decreased 0. 4~2. 2% than those of 7 days by foaming mortar, respectively. Also, the correlations between compressive and tensile strength, compressive and ending strength, tensile and bending strength were highly significant as a straight line shaped, respectively. 6. The correlations between absorption rate, air content, compressive strength and bulk density, absorption rate, compressive strength and air content were highly significant, respectively. The multiple regression equations of water-cement ratio, bulk density, absorption ate, air content, compressive strength, tensile strength and bending strength were computed depending on a function of mixing ratio and addition of foaming agent. It was highly significant, respectively. 7. At the mixing ratio of 1 : 1, the highest strengths were showed by cement mortar and foaming mortars, by chemical reagents. But, it gradually was decreased in poorer mixing ratio. The decreasing rates of strengths were in order of H $_2$S0 $_4$, HNO$_3$ and HCI, J,U,G foaming mortar and cement mortar. Specially, at the each mixing ratio, each chemical reagent and 3.0% of foaming agent, J foaming mortar was collapsed obviously. Therefore, for the structures requiring acid resistence, adding of foaming agent should be lower than 3.0%.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.51 no.7
• /
• pp.571-583
• /
• 2006

To secure high yield and good quality of rice, plant growth and nitrogen (N) nutrition status should be taken into account for managing panicle N topdressing (PN). This research aimed at investigating the rice yield response to PN under different plant growth and N nutrition status that was conditioned by different rates of basal and tillering N fertilizer (BTN). Stepwise multiple regression (SMR) was used for the analysis of yield response to (i) BTN and PN, and (ii) shoot N content at PIS (BTNup) and shoot N uptake from PIS to harvest (PNup). Rice yield increased significantly as BTN and PN Increased, but there was no significant interaction between BTN and PN. Yield increased almost linearly with the increasing BTN and PN up to $10{\sim}12$ and $6{\sim}7\;kgN/10a$, and with the increasing BTNup and PNup up to $6{\sim}7$ and $5{\sim}6\;kgN/10a$, respectively. But yield increment tended to decrease above those levels. These declines resulted from the decreased ripened grain ratio and 1000 grain weight even though spikelet number per unit area increased more at above those N levels. Spikelet number per unit area had the linear relationships with the shoot N uptake until heading, and with yield. Like most yield response curves, yield response in this experiment followed the diminishing return function with BTNup, PNup, and plant N uptake from seeding to harvest. Regardless of the degree of BTNup and PNup, yield had a quadratic relationship ($R^{2}$>0.88) with whole shoot N accumulation until harvest, suggesting that the yield determination was closely related with the whole shoot N uptake until harvest regardless of the differences in seasonal shoot N uptake.

• Journal of Biosystems Engineering
• /
• v.8 no.1
• /
• pp.9-16
• /
• 1983

This study was conducted to find out the effects of such parameters as specific draft resistance, slip rate, and fuel consumption rate on plowing performance in paddy fields spread with chopped rice straw. The plowing operation by an 8 P.S. power tiller was carried out in 6 different fields having the soil moisture content of 27~36 percent in dry basis in clay loam soil texture, and applying chopped rice straw of 10, 20, 30 and 60cm in length in the spring of 1982. The effects of soil hardness and moisture content on the plowing performance were also investigated. The results of the study are summarized as follows; 1. The minimum draft during the plowing operation was 110kg in the 30cm rice straw plot having the soil moisture content of 32 percent in dry basis. 2. The multiple regression equation of the specific draft(D) as a function of soil moisture content(M) and cutting length of rice straw(L) was obtained as follows. $D=14.1978-0.8565M+0.0661LxM-2.9685L+0.0133M^2+1.093L^2$ 3. In the 30cm rice straw plot with the soil moisture content of 32 percent in dry basis, the minimum specific draft resistance and the rate of slip were 0.35kg per $cm^2$ and 16 percent respectively. The specific draft resistance varied sensitively in accordance with the soil moisture content, and the slip rate of power tiller was dependent upon the cutting length of rice straw rather than the soil moisture content. 4. The highest plowing performance was 5.3 ares per hour at the soil moisture content of 35 percent and soil hardness of 10kg per $cm^2$. The relationship between the plowing performance and the soil moisture content was obtained by a quadratic equation. 5. The minimum fuel consumption rate in the plowing operation was recorded 6.5 liters per 10 ares in 30cm chopped rice straw plot with the soil moisture content of 32 percent in dry basis.

• Sleep Medicine and Psychophysiology
• /
• v.21 no.1
• /
• pp.5-13
• /
• 2014

Objectives: Depression, sleep complaints and cognitive impairments are commonly observed in the elderly. Elderly subjects with depressive symptoms have been found to show both poor cognitive performances and sleep disturbances. However, the relationship between sleep complaints and cognitive dysfunction in elderly depression is not clear. The aim of this study is to identify the association between sleep disturbances and cognitive decline in late-life depression. Methods: A total of 282 elderly people who underwent nocturnal polysomnography in a sleep laboratory were enrolled in the study. The Korean version of the Neuropsychological Assessment Battery developed by the Consortium to Establish a Registry for Alzheimer's Disease (CERAD-K) was applied to evaluate cognitive function. Depressive symptoms were assessed with the geriatric depression scale (GDS) and subjective sleep quality was measured using the Pittsburg sleep quality index (PSQI). Results: The control group ($GDS{\leq}9$) when compared with mild ($10{\leq}GDS{\leq}16$) and severe ($17{\leq}GDS$) depression groups, had significantly different scores in the Trail making test part B (TMT-B), Benton visual retention test part A (BVRT-A), and Stroop color and word test (SCWT)(all tests p<0.05). The PSQI score, REM sleep duration, apnea-hypopnea index and oxygen desaturation index were significantly different across the three groups (all indices, p<0.05). A stepwise multiple regression model showed that educational level, age and GDS score were predictive for both TMT-B time (adjusted $R^2$=35.6%, p<0.001) and BVRT-A score (adjusted $R^2$=28.3%, p<0.001). SCWT score was predicted by educational level, age, apnea-hypopnea index (AHI) and GDS score (adjusted $R^2$=20.6%, p<0.001). Poor sleep quality and sleep structure alterations observed in depression did not have any significant effects on cognitive deterioration. Conclusion: Older adults with depressive symptoms showed mild sleep alterations and poor cognitive performances. However, we found no association between sleep disturbances (except sleep apnea) and cognitive difficulties in elderly subjects with depressive symptoms. It is possible that the impact of sleep disruptions on cognitive abilities was hindered by the confounding effect of age, education and depressive symptoms.

• Journal of Dental Rehabilitation and Applied Science
• /
• v.39 no.1
• /
• pp.32-44
• /
• 2023

Purpose: The purpose of this study was to investigate the effect of implant connection type on marginal bone loss (MBL) and to analyze the factors that affect MBL. This study focuses on single implants planted in the upper and lower first molar area. Materials and Methods: A total of 87 implants from 68 patients were tracked for a period over 5 years. There were 57 external connection type (EC) implants and 30 internal connection type (IC) implants in 38 males and 30 females. The MBL and EA were measured from intraoral radiograph images taken after 5 years at most. Results: Significant difference in MBL between EC and IC type was observed in patients without GBR or diabetes. Patients without GBR exhibited an MBL of -0.065 ± 0.859 mm in EC type and -0.627 ± 0.639 mm in IC type (P = 0.025). Using multiple regression analysis, a statistically significant negative correlation was observed between MBL and conditions including implant-abutment connection type (β = -0.303), diabetes (β = -0.113), emergence angle > 30° (β = -0.234), and age (β = -0.776). Conclusion: Within this results, IC type implants had less MBL than EC type, and implant prosthesis with emergence angle over 30° showed greater MBL. To minimize the MBL of the implant and ensure implant stability, careful consideration should be given to the EA of implant prosthesis and its connection type.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.2 s.38
• /
• pp.127-140
• /
• 1992

This study was done to identify the association between serum copper and zinc levels and the cirrhosis and hepatocellular carcinoma(HCC), and to evaluate its diagnostic value on liver diseases. Sixty-three healthy persons, 60 patients with cirrhosis and 33 patients with hepatocellular carcinoma were rendomly selected and investigated for their general characteristics from October 1990 to August 1991. For analysis of the biochemical markers in liver function test and the serum copper and zinc levels, their fasting venous blood were sampled at 9:00 to 11:00 in the morning and centrifuged to separate the serum within one hour. All the samples were immediately analysed for biochemical markers and stored at $-20^{\circ}C$ in polypropylene tubes further copper and zinc analysis. Mean of serum coppper levels was $91.97{\pm}4.76{\mu}g/dl$ in control, $106.21{\pm}2.73{\mu}g/dl$ in cirrhosis and $127.05{\pm}0.77{\mu}g/dl$ in HCC. The value of HCC was statistically significantly higher than that of the control and cirrhosis(p<0.05). Serum zinc levels were $110.82{\pm}7.24{\mu}g/dl$ in control, $68.10{\pm}5.43{\mu}g/dl$ in cirrhosis and $63.78{\pm}2.20{\mu}g/dl$ in HCC. The values of cirrhosis and HCC were statistically significantly lower than that of control(p<0.05). The Cu/Zn ratio was statiatically significantly different among three groups(p<0.05). Test total protein, albumin, ALP and total bilirubin of biochemical markers of liver function were statistically significantly different among three groups(p<0.05). Differences between cirrhosis and HCC for ALT and AST, and between the control and HCC for direct bilirubin were not statistically significant. Biochemical markers statistically significantly correlated with serum copper and zinc levels and Cu/Zn ratio(p<0.05), were variable in three groups. In multiple logistic regression, odds ratio of serum copper level and Cu/Zn ratio had no statistical significance on the cirrhosis and the HCC, but that of serum sinc was statistically significant as 0.951 and 0.952(p<0.05). Serum copper and zinc levels and Cu/Zn ratio were not statistically significantly different between the cirrhosis and HCC. H\Albumin, ALP, zinc, total bilirubin and age among all variables were selected as main variables for three-group discriminant analysis. Percentage of 'grouped' cases correctly classified by these five variables was 98.4 for control, 73.4 for cirrhosis, 75.7 for HCC and 84.0 for all subjects. This study suggests that zinc level is considered to play a role as diagnostic marker on the hepatic disorders and be more useful than serum copper level and Cu/Zn ratio in diagnosis of the liver diseases.

• Journal of agricultural medicine and community health
• /
• v.26 no.1
• /
• pp.81-103
• /
• 2001

This study was conducted to identify the health behavior of middle-aged rural women and the factors that have an effect on them. For the purpose of the study, examinations were made from March 01, 2000 to March 31, 2000 with 468 women aged 40 to 64 out of 2,263 people whom four Primary Health Posts located in Yechon County, Kyongsangbuk-do Province, are in charge of. The results are summarized as follows. 17.5% of the subjects responded that the extent of their own interest in health were high. For the subjects having a chronic disease, a nuclear family, or an open family atmosphere, the extent appeared to be relatively higher, 15.4% responded that the extent of family's interest in their health was high. It was significantly high if the extent of education was high or if the family atmosphere was open. The subjects' average score of self-efficacy was 49.9 out of 68. The score significantly varied depending on religion, education, living together with a spouse or not, and the extent of the subjects' interest in health. The family pattern, family atmosphere, family's interest in the subjects' health were the variables that significantly influenced the self-efficacy. The average score of family function was 5.51 out of 10. The score significantly varies depending on age, education, occupation, financial status, the extent of the subjects' own interest in health, family atmosphere and family's interest in the subjects' health. In the practice of health behavior, the nonsmoking rate was 89.5%, the nondrinking rate 63.0%, the rate of exercising practice 6.6%, the rate of normal sleeping 75.6%, the rate of eating breakfast 91.7%, the rate of not eating between meals 18.2%, and the standard BMI 69.2%. In the frequency of health behavior, the subjects with the Breslow Index of 0-3, 4-5 and 6-7 accounted for 4.5%, 53.2%, and 42.3%, respectively. The average score of health behavior was 5.20 out of 7, in which significant variables were living together with a spouse or not, financial status, absence or presence of a chronic disease, and family atmosphere. In the multiple regression analysis with health behavior as a dependent variable, it was shown that living together with a spouse or not, financial status, and family atmosphere were the significantly substantial variables. The subjects were found to do health behavior well if they had not a spouse, a good financial status, or an open family atmosphere. They were also found to do health behavior well if the extent of self-efficacy was high or if the extent of family function was low, but these were not the significant variables. It is needed to develop a standard measuring tool fit for our environment and perform more studies in the future because the measuring tool used in this study was a tool developed in a foreign county. In promoting community health projects, it is required not to provide all community people with a uniform health program but to identify the health behavior of individuals and other variables such as living together with a spouse or not, financial status and family atmosphere before arranging for a proper health program.

• Journal of Preventive Medicine and Public Health
• /
• v.25 no.3 s.39
• /
• pp.247-268
• /
• 1992

This study was conducted to evaluate the effect of VDT work on eyes and vision among workers in a TV manufacturing plant. The study subjects consisted of 264 screen workers and 74 non-screen workers who were less than 40 years old male and had no history of opthalmic diseases such as corneal opacities, trauma, keratitis, etc and whose visual acuity on pre-employment health examination by Han's test chart was 1.0 or above. The screen workers were divided into two groups by actual time for screen work in a day : Group I, 60 workers, lesser than 4 hours a day and group II, 204 workers, more than 4 hours a day. From July to October 1992 a questionnaire was administered to all the study subjects for the general charateristics and subjective eye symptoms after which the opthalmologic tests such as visual acuity, spherical equivalent, lacrimal function, ocular pressure, slit lamp test, fundoscopy were conducted by one opthalmologist. The proportion of workers whose present visual acuity was decreased more than 0.15 in comparison with that on the pre-employment health examination by Han's test chart was 20.6% in Group II. 15.0% in Group I and 14.9% in non-screen workers. However, the differences in proportion were not statistically significant. The proportion of workers with decreased visual acuity was not associated with the age, working duration, use of magnifying glass and type of shift work (independent variables) in all of the three groups. However, screen workers working under poor illumination had a higher proportion of persons with decreased visual acuity than those working under adequate illumination (P<0.05) . The proportion of workers whose near vision was decreased was 27.5% in Group II, 18.3% in Group I, and 28.4% in non-screen workers and these differences in proportion were not statistically significant. Changes of near vision were not associated with 4 independent variables in all of the three groups. Six out of seven subjective eye symptoms except tearing were more common in Group I than in non-screen workers and more common in Group II than in Group I (P<0.01). Mean of the total scores for seven subjective symptoms of each worker(2 points for always, 1 point for sometimes, 0 point for never) was not significantly different between workers with decreased visual acuity and workers with no vision change. However, mean of the total scores for Group II was higher than those for the Group I and non-screen workers (P<0.01). Total eye symptom scores were significantly correlated with the grade of screen work, use of magnifying glass, and type of shift work. There was no independent variable which was correlated with the difference in visual acuity between the pre-employment health examination and the present state, the difference between far and near visions, lacrimal function, ocular pressure, and spherical equivalent. Multiple linear regression analysis for the subjective eye symptom scores revealed a positive linear relationship with actual time for screen work and shift work(P<0.01). In this study it was not observed that the VDT work decreased visual acuity but it induces subjective eye symptoms such as eye fatigue, blurred vision, ocular discomfort, etc. Maintenance of adequate illumination in the work place and control of excessive VDT work are recommended to prevent such eye symptoms.