• 대한전기학회논문지:전력기술부문A
• /
• 제50권8호
• /
• pp.388-394
• /
• 2001

This paper presents how to determine the optimal operating points of Unified Power Flow controllers (UPFC) the line flow control of which can enhance system security level. In order to analyze the effect of these devices on the power system, the decoupled model has been employed as a mathematical model of UPFC for power flow analysis. The security index that indicates the level of congestion of transmission line has been proposed and minimized by iterative method. The sensitivity of objective function for control variables of and UPFC has been derived, and it represents the change in the security index for a given set of changes in real power outputs of UPFC. The proposed algorithm with sensitivity analysis gives the optimal set of operating points of multiple UPECs that reduces the index or increases the security margin and Marquart method has been adopted as an optimization method because of stable convergence. The algorithm is verified by the 10-unit 39-bus New England system that includes multiple FACTS devices. The simulation results show that the power flow congestion can be relieved in normal state and the security margin can be guaranteed even in a fault condition by the cooperative operation of multiple UPECs.

• 한국항공우주학회지
• /
• 제50권11호
• /
• pp.763-770
• /
• 2022

다수의 드론이 운용되는 환경에서 경로점이 겹칠 때 충돌이 발생할 수 있으며 이를 대비한 충돌 회피는 필수적이다. 다수의 드론이 여러 임무를 수행하는 경우 드론의 경로가 복잡하고 충돌 예상점이 너무 많아 경로계획 단계에서 충돌을 회피하는 경로를 생성하는 방법을 사용하는 것은 적합하지 않다. 본 논문에서는 일반적으로 사용하는 경로 생성 알고리즘을 통해 경로를 생성하고, 그 경로에서 속도 프로파일 최적화를 이용한 충돌 회피 방법을 제안한다. 드론의 경로 간 충돌 예상점에서 드론 사이의 안전거리를 고려하였고, 경로 구간에 속도 프로파일을 할당하도록 설계하였다. 최적화 문제는 드론 간 거리에 대한 식을 비행시간을 변수로 두어 정의하였다. 선형화와 컨벡스화를 통해 구속 조건을 구성하고, 다수 드론 운용 환경에서 SQP(Sequential Quadratic Programming)알고리즘과 컨벡스 최적화 기법의 연산시간을 비교하였다. 마지막으로 20대 드론 운용 환경에서 컨벡스 최적화를 수행한 결과가 본 연구에서 제시한 다수 드론 운용에 적합한지 확인하였다.

• 한국산학기술학회논문지
• /
• 제19권3호
• /
• pp.584-593
• /
• 2018

유도전동기를 고효율로 제어하기 위한 다양한 연구가 진행되어 왔다. 그 중에서 단위전류당 최대토크 제어기는 최소한의 고정자 전류로 원하는 토크를 제공하기 때문에 유도전동기 드라이브에서 고효율의 동작을 제공한다. 이는 유도전동기를 수학적으로 정밀하게 표현하는 대안모델을 기반으로 제어기가 설계되었기 때문이다. 그러나, 온도 변화에 따른 회전자 저항의 변이는 대안모델의 파라미터와 실제의 유도전동기의 파라미터의 불일치가 발생하여 단위전류당 최대토크 성능을 심각하게 저해하고 단위전류당 최대토크 제어 조건을 만족하지 못하게 하게 있다. 이러한 유도전동기의 운전시에 발생하는 열적 상승으로 인한 파라미터 값의 변화를 고려하는 단위전류당 최대토크적응 제어기가 제안되었다. 본 논문에서는 단위전류당 최대토크적응 제어기가 다수의 운전영역에서도 최소의 고정자 전류로 원하는 토크를 성취하는지를 검토하였다. 실험을 통한 연구에서 회전자의 온도가 증가하더라도 다수의 운전영역에서 25Nm의 토크 명령에서 5%의 차이가 존재하더라도 토크 명령을 정확하게 추구하고 또한, 원하는 토크를 최소한의 고정자 전류로 얻어짐을 확인함으로써 단위전류당 최대토크적응 제어기의 우수성을 검증하였다.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.534-537
• /
• 1997

Solar power systems have become popular in the modem electric energy system. In order to supply the DC power, generated by solar cells, to the electric power system, the solar power system requires DC-to-AC power conversion. A line-commutated inverter or a forced-commutated inverter can be used in the DC-to-AC power conversion. Because of the nonlinear V-I characteristics of the solar cells, multiple operating points determined by the control mode of the inverter exist in the DC V-I state plane of the solar power system. In this paper, the stability of utility-interactive solar power system with a line-commutated inverter is analyzed at various operating points, using the eigenvalue method and the state-plane analysis technique. The stability of a forced-commutated inverter case is also anaiyzed and compared to that of the line-commutated inverter case.

• Parasites, Hosts and Diseases
• /
• 제45권3호
• /
• pp.239-243
• /
• 2007

Many allergists are currently focusing on the development of new diagnostic tools, and are attempting to improve both the sensitivity and specificity. A multiple allergen simultaneous test-chemiluminescent assay (MAST-CLA) is one of the most popular diagnostic tools used in the Republic of Korea. However, there remains controversy among allergists with regard to the cut-off point for a positive result. The present study was conducted in order to determine the validity of MAST-CLA as compared with that of the skin prick test, with particular emphasis on arthropod allergens, on the basis of percentage agreement rates and k-values, and also to suggest the optimal positive cutoff points using receiver operating characteristic (ROC) curves. The study was conducted with 97 subjects (54 men, 43 women). Optimal individual cut-off points were calculated as follows; class II for Dermatophagoides farinae, class I for Dermatophagoides pteronyssinus, and trace for a cockroach mix. These findings suggest that attempting to apply optimal individual cut-off points will be a good way of improving diagnostic tests, particularly MAST-CLA.

• 전기학회논문지
• /
• 제60권1호
• /
• pp.142-149
• /
• 2011

This paper presents a new state of charge(SOC) estimation of large capacity of Li-ion battery (LIB) based on the multiple model adaptive estimation(MMAE) method. We first introduce an equivalent circuit model of LIB. The relationship between the terminal voltage and the open circuit voltage(OCV) is nonlinear and may vary depending on the changes of temperature and C-rate. In this paper, such behaviors are described as a set of multiple linear time invariant impedance models. Each model is identified at a temperature and a C-rate. These model set must be obtained a priori for a given LIB. It is shown that most of impedances can be modeled by first-order and second-order transfer functions. For the real time estimation, we transform the continuous time models into difference equations. Subsequently, we construct the model banks in the manner that each bank consists of four adjacent models. When an operating point of cell temperature and current is given, the corresponding model bank is directly determined so that it is included in the interval generated by four operating points of the model bank. The MMAE of SOC at an arbitrary operating point (T $^{\circ}C$, $I_{bat}$[A]) is performed by calculating a linear combination of voltage drops, which are obtained by four models of the selected model bank. The demonstration of the proposed method is shown through simulations using DUALFOIL.

• 산업공학
• /
• 제7권2호
• /
• pp.87-97
• /
• 1994

Many vehicle routing methods have been suggested, which minimize the routing distances of vehicles to reduce the total transportation cost. But the more considerations the method takes, the higher complexites are involved in a large number of practical situations. The purpose of this paper is to develop a vehicle distribution planning system using heuristic algorithms and simulation techniques for home electronics companies. The vehicle distribution planning system developed by this study involves such complicated and stochastic conditions as one depot, multiple nodes(demand points), multiple vehicle types, multiple order items, and other many restrictions for operating vehicles. The proposed system is compared with the nearest neighbor method of the current system in terms of total logistics cost and driving time. This heuristics algorithm and simulation based distribution planning system is efficient in computational complexity, and give improved solutions with respect to the cost as well as the time. This method constructs a route with a minimum number of vehicles for a given demand.

• 한국국방경영분석학회지
• /
• 제22권2호
• /
• pp.182-199
• /
• 1996

Many vehicle routing methods have been suggested, which minimize the routing distances of vehicles to reduce the total transportation cost. But the more considerations the method takes, the higher complexites are involved in a large number of practical situations. The purpose of this paper is to develop a vehicle distribution planning system using heuristic algorithms and simulation techniques for home electronics companies. The vehicle distribution planning system developed by this study involve so complicated and stochastic conditions such as one depot, multiple nodes(demand points), multiple vehicle types, multiple order items, and other many restrictions for operating vehicles. The proposed system is compared with the nearest neighbor method and the savings method in terms of total logistics cost and driving time. This heuristic algorithm and simulation based distribution planning system is efficient in computational complexity, and give improved solutions with respect to the cost as well as the time. This method constructs a route with a minimum number of vehicles for a given demand.

• 정보과학회 컴퓨팅의 실제 논문지
• /
• 제23권10호
• /
• pp.588-593
• /
• 2017

본 논문에서는 자율주행차량에서 사용되는 고가의 다채널 라이다(LiDAR) 센서를 다수의 저가 소채널 라이다들로 대체하여 사용하는 경우에 다수의 라이다들을 하나의 라이다로 가상화하는 드라이버를 제안한다. 이를 통해 로봇 분야에서 하나의 물리 라이다를 가정하여 개발된 SLAM(Simultaneous Localization And Mapping) 알고리즘들은 수정 없이 사용될 수 있다. 본 논문은 제안하는 드라이버를 로봇운영체제 ROS(Robot Operating System) 상에서 구현하고 SLAM 알고리즘과 함께 평가하였다. 평가 결과, 제안한 드라이버는 3차원 점지도의 점밀도를 제어하는 필터와 함께 기존 알고리즘의 수정 없이 사용될 수 있음을 확인하였다.

• 산업경영시스템학회지
• /
• 제44권3호
• /
• pp.86-97
• /
• 2021

As mechatronic systems have various, complex functions and require high performance, automatic fault detection is necessary for secure operation in manufacturing processes. For conducting automatic and real-time fault detection in modern mechatronic systems, multiple sensor signals are collected by internet of things technologies. Since traditional statistical control charts or machine learning approaches show significant results with unified and solid density models under normal operating states but they have limitations with scattered signal models under normal states, many pattern extraction and matching approaches have been paid attention. Signal discretization-based pattern extraction methods are one of popular signal analyses, which reduce the size of the given datasets as much as possible as well as highlight significant and inherent signal behaviors. Since general pattern extraction methods are usually conducted with a fixed size of time segmentation, they can easily cut off significant behaviors, and consequently the performance of the extracted fault patterns will be reduced. In this regard, adjustable time segmentation is proposed to extract much meaningful fault patterns in multiple sensor signals. By considering inflection points of signals, we determine the optimal cut-points of time segments in each sensor signal. In addition, to clarify the inflection points, we apply Savitzky-golay filter to the original datasets. To validate and verify the performance of the proposed segmentation, the dataset collected from an aircraft engine (provided by NASA prognostics center) is used to fault pattern extraction. As a result, the proposed adjustable time segmentation shows better performance in fault pattern extraction.