• 한국산업보건학회지
• /
• 제10권1호
• /
• pp.160-169
• /
• 2000

Daily indoor and outdoor nitrogen dioxide ($NO_2$) concentration for 30 days were measured in 28 houses with questionnaire of housing characteristics in Brisbane, Australia. Using mass balance equation and regression analysis, penetration factors and source strength factors were calculated. The penetration factors of 27 houses except one house were between zero and 1, though penetration factor should be between zero and 1 by means of mass balance equation. Relationship between indoor and outdoor concentrations in each 27 house was calculated using regression analysis. According to the obtained linear regression equation, the slope means penetration factor and the intercept means source strength factor. Calculated mean and standard deviation of coefficients of determination ($R^2$) in electric and gas range houses were $0.70{\pm}0.13$ and $0.57{\pm}0.21$, respectively. The source strength factors were more than zero in 27 houses. Mean and standard deviation of slopes in electric and gas range houses were $0.65{\pm}0.18$ and $0.56{\pm}0.12$, respectively. Mean and standard deviation of intercepts in electric and gas range houses were $1.49{\pm}1.25$ and $5.77{\pm}3.55$, respectively. Air exchange rate and source strength were calculated from penetration factor and source strength factor, respectively. Geometric mean and standard deviation of calculated air exchange rates in 27 houses were $1.1/hr{\pm}1.5$. Presence of gas range was the most significant factor contributing to indoor $NO_2$ level in house characteristics (p=0.003). In gas range houses, source strengths ranged from 4.1 to $33.1cm^3/hr{\cdot}m^3$ with a mean $12.7cm^3/hr{\cdot}m^3$ and a standard deviation 9.8. The source strengths of gas range houses were significantly different from those of electric range houses by t-test (p<0.001)

• 대한한의학회지
• /
• 제34권3호
• /
• pp.13-24
• /
• 2013

Objectives: The aims of this study were to investigate the availability of diagnosis of Yin-deficiency in the elderly with xerostomia and factors influencing subjective oral dryness. Methods: We surveyed 50 patients recruited by the clinical trial, 'Efficacy of Yukmijihwang-tang on Xerostomia in the Elderly: A Randomized, Double-blind, Placebo-controlled, Two-center Trial'. The subjects were assessed on their subjective oral dryness using the Dry Mouth Symptom Questionnaire (DMSQ). Their salivary functions were measured by Unstimulated Salivary Flow Rate (USFR) measurements. In addition, the subjects were evaluated on their Qi-stagnation and Yin-deficiency conditions using the Qi-stagnation questionnaire and Yin-deficiency questionnaire. Results: There were statistically significant correlations between three variables (USFR, DMSQ score and Qi-stagnation score) and Yin-deficiency score. In the multiple regression analysis, the regression model was statistically significant (F = 10.273, p < .001). The factor most strongly influencing the subjective oral dryness was USFR (${\beta}$ = -0.386). Yin-deficiency had the next strongest impact on the subjective oral dryness (${\beta}$ = 0.371). Qi-stagnation affected the subjective oral dryness weakly (${\beta}$ = 0.075). In the simple regression analysis, Yin-deficiency had a statistically significant effect on each of six subscales of DMSQ (p < .01). Among the six subscales, DMSQ-1 ('Oral dryness at night or on awakening') was the most strongly influenced by Yin-deficiency. Conclusions: The results of this study show that the diagnosis of Yin-deficiency in the elderly with xerostomia was available and Yin-deficiency was an important factor influencing the subjective oral dryness. Therefore, the consideration of Yin-deficiency is significant for diagnosis and treatment in the elderly with xerostomia.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2012년도 제43회 하계 정기 학술대회 초록집
• /
• pp.172-173
• /
• 2012

Currently GaN based LED is known to show high internal or external efficiency at low current range. However, this LED operation occurs at high current range and in this range, a significant performance degradation known as 'efficiency droop' occurs. Auger process, carrier leakage process, field effect due to lattice mismatch and thermal effects have been discussed as the causes of loss of efficiency, and these phenomena are major hindrance in LED performance. In order to investigate the main effects of efficiency loss and overcome such effects, it is essential to obtain relative proportion of measurements of internal quantum efficiency (IQE) and various radiative and nonradiative recombination processes. Also, it is very important to obtain radiative and non-radiative recombination times in LEDs. In this research, we measured the IQE of InGaN/GaN multiple quantum wells (MQWs) LEDs with PSS and Planar substrate using modified ABC equation, and investigated the physical mechanism behind by analyzing the emission energy, full-width half maximum (FWHM) of the emission spectra, and carrier recombination dynamic by time-resolved electroluminescence (TREL) measurement using pulse current generator. The LED layer structures were grown on a c-plane sapphire substrate and the active region consists of five 30 ${\AA}$ thick In0.15Ga0.85N QWs. The dimension of the fabricated LED chip was $800um{\times}300um$. Fig. 1. is shown external quantum efficiency (EQE) of both samples. Peak efficiency of LED with PSS is 92% and peak efficiency of LED with planar substrate is 82%. We also confirm that droop of PSS sample is slightly larger than planar substrate sample. Fig. 2 is shown that analysis of relation between IQE and decay time with increasing current using TREL method.

• 한국산학기술학회논문지
• /
• 제21권6호
• /
• pp.411-416
• /
• 2020

본 연구는 적외선 광학재료의 중적외선 영역의 굴절률을 파악하기 위해 반사율을 측정하고 굴절률과 반사율의 관계로부터 굴절률을 추정하는 방법을 제안한다. 전반사 거울 4개를 일정한 간격으로 배열하고 적외선 광원으로부터 연속 파장의 평행광이 45°로 입사되도록 광 경로를 구성한다. 광 경로를 따라 4개의 전반사 거울에 반사되어 온 광강도 I_B를 측정한 후, 광 경로의 마지막에 놓이는 거울을 시편으로 교체하고 광강도 I_s를 측정한다. I_B와 I_s, 전반사 거울의 비를 이용하여 재료의 반사율을 계산한다. 계산된 반사율과 Fresnel의 굴절률과 반사율 관계식에 넣고 시행착오법으로 굴절률을 추정한다. 이 방법을 적용하여 사파이어(Al₂O₃), 게르마늄(Ge), 불화마그네슘(MgF₂), 황화아연(ZnS)재료를 대상으로 실험하고 굴절률을 추정하여 참고문헌자료들과의 비교를 통하여 모든 재료에 대해 파장범위 3 - 5㎛에서 최대 차이 2% 이하로 잘 일치하는 결과를 얻을 수 있었으며, 이를 통해 본 굴절률 측정방법의 타당성을 확인할 수 있다. 본 연구에서 제시된 방법은 연속 파장의 적외선 광원을 사용하기 때문에 한 번의 측정으로 여러 파장에 대한 굴절률을 추정 할 수 있는 장점이 있다.

• 유통과학연구
• /
• 제12권4호
• /
• pp.23-30
• /
• 2014

Purpose - The purpose of this study is to analyze the efficiency of retail businesses by dividing domestic retailers into discount stores, super supermarkets (SSMs), and department stores. It suggests retail-business investment strategies by using data environment analysis (DEA) to analyze how input elements such as store area, parking lot area, number of employees, and sales management expenses for the convenience of customers positively affect business performance measurements such as sales and visiting customers per day. Research Design, Data, and Methodology - The DEA model calculates a ratio of the weighted mean of various inputs to the weighted mean of various outputs and measures the efficiency of a specific decision making unit (DMU). The study included 19 companies (five discount store DMUs, ten SSM DMUs, and four department store DMUs). Because the business elements and sizes of retail store DMUs used in this analysis are different, average per-store input and output variables were used. Data were collected from "The Yearbook of Retail Industry in Korea (2012)." DEA analysis was used to determine differences in efficiency among discount stores, SSMs, and department stores in terms of the business elements of each retail business. It was also used to determine what business elements were excessively invested in by comparing and analyzing efficiency by business elements using SPSS software's ANOVA (Analysis of Variance). Results - The CCR and BCC efficiency analysis found that the efficiency of discount stores is low. We believe that the saturation state of discount stores is a major factor. The ANOVA analysis confirms the VRS hypothesis with a statistically significant difference among the three groups, based on an analysis confidence interval of 95%. CRS and SE were not found to be significantly different among the three groups. As for the post hoc test, which concretely shows differences by group, the Scheffe's multiple comparison analysis test found the average differences between group 1 (discount stores) and group 2 (SSM) to be statistically significant. Conclusions - The DEA efficiency analysis implies that investment in input elements, including store area, parking lot area, and sales management expenses, were excessive in the case of discount stores, while SSMs need to invest more in promotion activities such as gifts, events, and coupons for customer management. Department stores have found that small companies invest excessively in input elements. Department stores need to invest in differentiated shopping mall complexes. This study was limited in acquiring statistical data; various input variables which might have shown more secure customer management and promotional expenses could not be applied. As the study was limited in various aspects of the efficiency analyses because financial analyses of the companies and of causal relationships, including satisfaction and loyalty of visiting customers, were not done, these aspects will be examined in the next study.

• 유통과학연구
• /
• 제12권4호
• /
• pp.85-92
• /
• 2014

Purpose - This study conducted empirical research on non-financial corporations listed on the stock exchange from 2001 to 2010, focusing on the effects of corporate governance on real earnings management of corporations. In particular, this study examined primarily the impact of the largest shareholder who could use earnings management to pursue his own self-interest, and foreign investors who played a checking role against the largest shareholders. The study also reviewed the relationship between corporate governance and earnings management while also considering corporate growth. Research design, data, and methodology - As for the measurements of real earnings management, abnormal operating cash flow and abnormal production cost were utilized. As for the independent variables, share ratio of the largest shareholder and affiliate person (M) and share ratio of foreign investors (FT) were leveraged. This study excluded those organizations that had changed their fiscal years, those that had not submitted an audit report, corporations under supervision, delisted corporations, corporations that had changed their business type, and so on, from the non-financial corporations out of the publicly traded corporations whose fiscal year ended in December from 2001 to 2010 in addition, KIS values were utilized for the corporate financial data in the study. To verify whether management structure and growth had an impact on real earnings management of a corporation through empirical analysis, a multiple regression analysis model was applied. Result - First, as a result of the analysis, the share ratio (M) of the largest shareholder and affiliate person was found to have a significant positive correlation with abnormal cash flow from operations(ACF) and abnormal production cost (APD). When controlling the growth, the share ratio (M) of the largest shareholder and affiliate person was found to have an insignificant correlation with abnormal cash flow from operations(ACF) but a significant correlation with abnormal production cost (APD). Second, foreign ownership (FT) was found to have a significant positive correlation with abnormal cash flow from operations(ACF) and abnormal production cost (APD) at the confidence level of 1 percent when not including the growth dummy. When controlling the growth, foreign ownership (FT) was found to have a significant negative correlation with abnormal cash flow from operations (ACF) and with abnormal production cost (APD). Conclusion - The results imply that the largest shareholder is closely related to earnings management through real activities regardless of corporate growth. It is also possible to determine from these results that foreign investors are related to earnings management through real activities when not considering corporate growth, but that they would reduce earnings management in the case of considering the growth. Thus, this study verified along with the existing studies that foreign investors were conducting the control function on controlling shareholders.

• 한국초지조사료학회지
• /
• 제36권4호
• /
• pp.365-369
• /
• 2016

본 연구는 산지초지에서 애기수영의 분포를 신속하고 정밀하게 파악하기 위안 무인기 촬영 항공영상의 이용가능성을 실험하였다. 항공영상은 일반 디지털카메라로 촬영한 RGB 영상과 자체 제작한 NIR 카메라로 촬영한 NIR 영상을 이용하여 각각 Red, Green, Blue 벤드와 NIR 밴드를 이용하였고, 밴드조합에 따른 애기수영의 건물비율과의 상관관계를 조사하였다. 다중선형회귀분석 결과 NIR+R+G+B 밴드의 조합이 가장 높은 상관관계($R^2$, 0.96)를 보였으며, R+G+B 밴드의 조합이 다음으로 높은 상관관계를 보였고 ($R^2$, 0.91) NIR+R 밴드($R^2$, 0.45)와 NIR+G 밴드 ($R^2$, 0.27)는 상대적으로 낮은 상관관계를 보여 NIR+R+G+B 밴드조합이 애기수영 분포 파악을 위하여 가장 적합한 것을 확인하였다. R+G+B 밴드 조합의 경우 NIR+R+G+B 밴드의 조합과 비교하여 예측정확도가 큰 차이가 나지 않았으며 근적외선 카메라 없이 일반 디지털 카메라로 영상정보의 획득이 가능하기 때문에 현장적용성 면에서 장점을 가질 것으로 판단된다.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2016년도 제50회 동계 정기학술대회 초록집
• /
• pp.279.2-279.2
• /
• 2016

InGaN/GaN multiple quantum wells (MQWs) have been attracted much attention as light-emitting diodes (LEDs) in the visible and UV regions. Particularly, quantum efficiency of green LEDs is decreased dramatically as approaching to the green wavelength (~500 nm). This low efficiency has been explained by quantum confined Stark effect (QCSE) induced by piezoelectric field caused from a large lattice mismatch between InGaN and GaN. To improve the quantum efficiency of green LED, several ways including epitaxial lateral overgrowth that reduces differences of lattice constant between GaN and sapphire substrates, and non-polar method that uses non- or semi-polar substrates to reduce QCSE were proposed. In this study, graded short-period InGaN/GaN superlattice (GSL) was grown below the 5-period InGaN/GaN MQWs. InGaN/GaN MQWs were grown on the patterned sapphire substrates by vertical-metal-organic chemical-vapor deposition system. Five-period InGaN/GaN MQWs without GSL structure (C-LED) were also grown to compare with an InGaN/GaN GSL sample. The luminescence properties of green InGaN/GaN LEDs have been investigated by using photoluminescence (PL) and time-resolved PL (TRPL) measurements. The PL intensities of the GSL sample measured at 10 and 300 K increase about 1.2 and 2 times, respectively, compared to those of the C-LED sample. Furthermore, the PL decay of the GSL sample measured at 10 and 300 K becomes faster and slower than that of the C-LED sample, respectively. By inserting the GSL structures, the difference of lattice constant between GaN and sapphire substrates is reduced, resulting that the overlap between electron and hole wave functions is increased due to the reduced piezoelectric field and the reduction in dislocation density. As a results, the GSL sample exhibits the increased PL intensity and faster PL decay compared with those for the C-LED sample. These PL and TRPL results indicate that the green emission of InGaN/GaN LEDs can be improved by inserting the GSL structures.

• 콘크리트학회지
• /
• 제6권6호
• /
• pp.159-172
• /
• 1994

기존 콘크리트 구조물에 대한 콘크리트의 강도나 품질상태를 비파괴적으로 추정하는 방법에는 여러 가지가 있으나, 그 중에서 콘크리트 강도를 추정하는 방법들 중에서 반발경도법과 초음파속도법이 주로 많이 이용되고 있다. 그러나 이들 방법은 구조물의 종류나 재령, 각종 영향인자 등으로 콘크리트의 추정 강도가 서로 상이한 결과를 주며, 어느 경우의 특정 구조물에도 신뢰성있는 결과를 주기 어려운 문제가 있다. 콘크리트 구조물은 시공 후 사용 중에 갖가지 서로 다른 환경의 영향을 받게 되며, 특히 장기간 경과된 구조물은 당초의 건설이력 사항이 불분명하여 콘크리트 강도추정에 더욱 어려운 점이 많은 실정이다. 따라서, 본 연구의 목적은 우리나라 육지 및 해안 구조물에 대한 합리적인 강도 추정을 위하여 비파괴시험법을 이용하여 콘크리트 강도 추정식을 제안하였다. 이를 위하여 본 연구에서는 건설 후 오랜 공용년수를 지닌 기존 콘크리트 구조물들을 육지 구조물과 해안 구조물로 분류하여 대상구조물의 콘크리트에 직접 반발경도와의 관계, 코어 강도와 초음파 속도와의 관계, 코어 강도와 반발경도와 초음파 속도와의 다중상관 관계를 분석하였다. 본 연구 결과 현재 이용되고 있는 강도 추정식이나 환산도표는 오래된 기존 구조물의 강도 추정에 잘 맞지 않는 것으로 나타나고 있으며, 따라서 이들 구조물의 콘크리트 강도 추정을 합리적인 비파괴시험법을 이용한 예측 공식을 유도하여 제시하였다. 본 연구에서 제시된 강도 예측 공식은 오래된 기존 구조물의 콘크리트 강도 추정에 효율적으로 이용될 수 있을 것으로 사료된다.

• 대한치과교정학회지
• /
• 제33권6호
• /
• pp.407-418
• /
• 2003

본 연구의 목적은 전후방 및 수직적 골격형에 따라 선험적으로 9 개의 유형 (type)으로 분류된 정상교합자의 치아치조부 보상기전의 양상을 분석하고 이를 임상적으로 개별 부정교합자에게 적용이 가능한 신뢰성 있고 간편한 골격 유형의 감별기준을 도출하고자 한 것이었다. 이를 위하여 정상교합자 294명의 측모두부방사선계측치 중 치아치조부 계측 항목의 기술 통계량을 구하고 각 유형간의 특징을 비교하기 위하여 분산 분석과 다중 비교를 시행하였으며, 골격 계측 항목과 치아치조부 계측 항목간의 상관관계를 분석하였다. 또한 이러한 유형을 부정교합자의 개별 골격형에 적용할 수 있도록 판별 분석을 시행하여 골격형 감별의 효율성과 정확성을 가늠하였다. 그 결과 갈 골격 유형별로 특징적인 치아치조부 보상기전을 확인할 수 있었으며, 상/하악 전치의 위치 및 교합 평면을 나타내는 변수에서 높은 상관관계가 관찰되었다. 판별 분석 결과 9개의 골격 유형을 분류할 수 있는 4개의 변수(AB-MP, SN-AB, PMA)를 구할 수 있었으며, 이들 4개의 변수로 이루어진 판별 계수로 전체 표본의 $87.8\%$를 정확하게 분류할 수 있었다. 결론적으로, 이러한 연구 결과를 통해 개별 부정교합자의 개별화된 진단 및 치료 지침 수립시 기초적 정보를 제공할 수 있을 것으로 예견되었다.