• The Journal of the Korea Contents Association
• /
• v.17 no.1
• /
• pp.157-165
• /
• 2017

Even though the importance of emotional aspects in design has been discussed and researched actively, researches mainly focusing on the emotional aspects expressed through architectural materials have been rare. Thus, Previous researches were investigated to draw typical categories to express emotional characteristics through architectural materiality. Case study shows Zumthor's practical methodologies in these state: tectonic expression with creative tectonic methods and local residents' voluntary-participation in construction; enhancement of intimate emotional ties with the local heritage through the usage of local materials and traditional construction techniques; coexistence of past and present materials, and showing the change of materiality via weathering; activation of synesthesia by touching multiple senses; sustainability by using environment friendly materials and construction methods. The results can be hopefully helpful to future researches related to emotional aspects on spatial design.

• Fire Science and Engineering
• /
• v.19 no.3 s.59
• /
• pp.70-75
• /
• 2005

The heat of combustion of polymer materials is an important fire characteristics, which can be used with other fire parameter to predict the potential fire hazard in the polymer handling process. The aim of this study is to predict the heat of combustion for polymers which used in the building interior materials. By using the literature data and multiple regression, the new equation for predicting the heat of combustion of polymers is proposed. The A.A.p.E.(average absolute percent error) and the A.A.D.(average absolute deviation) of the reported and the calculated heat of combustion by means of the oxygen consumption calorimeter and the stoichiometric coefficient were 4.46 and 1.09, and the correlation coefficient was 0.972. The values calculated by the proposed equations were in good agreement with the literature data. Therefore, it is expected that this proposed equations will support the use of the research for other polymer materials.

• The Research Journal of the Costume Culture
• /
• v.20 no.2
• /
• pp.195-207
• /
• 2012

In South Korea, the growth of online shopping malls that are overtaking traditional offline distributors in sales requires the latter to concentrate on developing a variety of contents amidst the ever-changing and competitive market environment. First of all, attention should be paid to information on fashion item materials. This study examined the current status of online shopping malls with a focus on their three different types-specialized malls, general malls, and open markets-and investigated consumers' hedonic shopping motives and influence on fashion materials in terms of purchasing behavior. In doing so, this study surveyed men and women in their 20s-30s residing in Seoul or its surrounding cities and used a total of 255 questionnaires for statistical analysis. The statistical software program SPSS 15.0 was used to conduct frequency analysis, factor analysis, reliability analysis, and multiple regression analysis. The study results showed that in general and specialized shopping malls, consumers granted greater reliability and importance to fashion materials when their interest in shopping or attention to fashion items/brands was high and when they wanted rare items. In open markets, the more interest consumers had in shopping and the more sensitive they were to fashion information, the more dependent they were on prices; in other words, prices were found to have a greater influence on their purchase decisions than the quality of fashion materials. The findings of this study would be useful to marketers and distributors who are trying to develop their marketing strategies based on fashion material information, according to the different types of online shopping malls.

• The Mathematical Education
• /
• v.58 no.3
• /
• pp.347-365
• /
• 2019

It is important to pay attention to how teachers recognize and use curriculum materials in order to link written curriculum and enacted curriculum. In this study, 90 preservice mathematics teachers were surveyed to identify their perspective and reading of curriculum materials. Especially, we focused on the curriculum documents, textbooks, and teachers' guidebooks containing the concept of conditional probability which is addressed in highschool mathematics curriculum. The various misconceptions of conditional probability were reported in the many researches, and there are multiple methods to introduce conditional probability in mathematics classes. As a result, curriculum materials have some limits to be used as they are and considered to be reconstructable by participants, but their curriculum reading were mainly classified to be descriptive and evaluative, not to be interpretive. However, unlike curriculum documents, textbooks and teachers' guidebooks were partially interpreted by participants using their knowledge of conditional probability. The purpose of this study is to investigate the profession of mathematics teachers in terms of curriculum implementation. We expect that this study will provide a basic framework for analyzing mathematics teachers' works and suggest some implications for the professional development of mathematics teachers.

• Journal of Ocean Engineering and Technology
• /
• v.33 no.5
• /
• pp.486-494
• /
• 2019

Recently, the interest in marine leisure activities has been growing rapidly with the work-life balance trend. In response to this demand, the Korean government is supporting fostering and revitalizing the relevant industries and facilities. In particular, a marina has been making efforts to change itself into a resort with multiple amenities instead of a simple mooring facility. However, the facilities in a marina for the transport of marine leisure equipment mostly consist of cranes and boat-lifts using ropes, which can result in incidents such as damage and accidents during lifting or movement. This paper proposes the equipment and support system for the safe transportation of marine leisure ships. Aluminum transport equipment was designed by performing a structural analysis to achieve a lighter weight than the existing steel products. In addition, a safety support system with alarms for tilting or obstacles and a slope monitoring system was developed to enhance the safety during operation and transportation. The safety support system developed in this study was implemented and installed in the transport system, and verified through commissioning on land.

• Korean Journal of Materials Research
• /
• v.31 no.7
• /
• pp.420-426
• /
• 2021

Graphene, a new material with various advantageous properties, has been actively used in various fields in recent years. Applications of graphene oxide are increasing in combination with other materials due to the different properties of graphene oxide, depending on the number of single and multiple layers of graphene. In this study, single-layer graphene oxide and multi-layer graphene oxide are spray coated on polystyrene, and the physicochemical properties of the coated surfaces are characterized using SEM, Raman spectroscopy, AFM, UV-Vis spectrophotometry, and contact angle measurements. In single-layer graphene oxide, particles of 20 ㎛ are observed, whereas a 2D peak is less often observed, and the difference in surface height increases according to the amount of graphene oxide. Adhesion increases with an increase in graphene oxide up to 0.375 mg, but decreases at 0.75 mg. In multi-layer graphene oxide, particles of 5 ㎛ are observed, as well as a 2D peak. According to the amount of graphene oxide, the height difference of the surface increases and the adhesive strength decreases. Both materials are hydrophilic, but single-layer graphene oxide has a hydrophilicity higher than that of multi-layer graphene oxide. We believe that multi-layer graphene oxide and single-layer graphene oxide can be implemented based on the characteristics that make them suitable for application.

• Imaging Science in Dentistry
• /
• v.51 no.1
• /
• pp.1-7
• /
• 2021

Purpose: The aim of this study was to assess artifacts generated in cone-beam computed tomography (CBCT) of 3 types of dental implants using 3 metal artifact reduction (MAR) algorithm conditions (pre-acquisition MAR, post-acquisition MAR, and no MAR), and 2 peak kilovoltage (kVp) settings. Materials and Methods: Titanium-zirconium, titanium, and zirconium alloy implants were placed in a dry mandible. CBCT images were acquired using 84 and 90 kVp and at normal resolution for all 3 MAR conditions. The images were analyzed using ImageJ software (National Institutes of Health, Bethesda, MD) to calculate the intensity of artifacts for each combination of material and settings. A 3-factor analysis of variance model with up to 3-way interactions was used to determine whether there was a statistically significant difference in the mean intensity of artifacts associated with each factor. Results: The analysis of all 3 MAR conditions showed that using no MAR resulted in substantially more severe artifacts than either of the 2 MAR algorithms for the 3 implant materials; however, there were no significant differences between pre- and post-acquisition MAR. The 90 kVp setting generated less intense artifacts on average than the 84 kVp setting. The titanium-zirconium alloy generated significantly less intense artifacts than zirconium. Titanium generated artifacts at an intermediate level relative to the other 2 implant materials, but was not statistically significantly different from either. Conclusion: This in vitro study suggests that artifacts can be minimized by using a titanium-zirconium alloy at the 90 kVp setting, with either MAR setting.

• Nuclear Engineering and Technology
• /
• v.54 no.3
• /
• pp.860-866
• /
• 2022

An accurate prediction of the pressure drop along the flow paths is crucial in the design of advanced passive systems cooled by heavy liquid metal coolants. To date, a generic pressure drop correlation over spacer grids by Rehme has been applied extensively, which was obtained from substantial experimental data with multiple types of components. However, a few experimental studies have reported that the correlation may give large discrepancies. To provide a more reliable correlation for ring-type spacer grids, the current numerical study aims at figuring out the most critical factor among four hypothetical parameters, namely the flow area blockage ratio, number of fuel rods, type of fluid, and thickness of the spacer grid in the flow direction. Through a set of computational fluid dynamics simulations, we observed that the flow area blockage ratio dominantly influences the pressure loss characteristics, and thus its dependence should be more emphasized, whereas the other parameters have little impact. Hence, we suggest a new correlation for the drag coefficient as C_B = C_ν,m/ε^2.7, where C_ν,m is formulated by a nonlinear fit of simulation data such that C_ν,m = -11.33 ln(0.02 ln(Re_b)).

• The Journal of Advanced Prosthodontics
• /
• v.14 no.6
• /
• pp.360-368
• /
• 2022

PURPOSE. This study assessed the physical and mechanical properties of interim crown materials fabricated using various digital techniques after accelerated aging. MATERIALS AND METHODS. Three groups of interim dental restorative materials (N = 20) were tested. The first group (CO) was fabricated using a conventional manual method. The second group (ML) was prepared from prefabricated resin blocks for the milling method and cut into specimen sizes using a cutting disc. The third group (3D) was additively manufactured using a digital light-processing (DLP) 3D printer. Aging acceleration treatments using toothbrushing and thermocycling simulators were applied to half of the specimens corresponding to three years of usage in the oral environment (N = 10). Surface roughness (Ra), Vickers microhardness, 3-point bending, sorption, and solubility tests were performed. A 2-way analysis of variance (ANOVA) and Fisher's multiple comparison test were used to compare the results among the groups. RESULTS. The mean surface roughness (Ra) of the resin after accelerated aging was significantly higher in the CO and ML groups than that before aging, but not in the 3D group. All groups showed reduced hardness after accelerated aging. The flexural strength values were highest in the 3D group, followed by the ML and CO groups after accelerated aging. Accelerated aging significantly reduced water sorption in the ML group. CONCLUSION. According to the tested material and 3D printer type, both 3D-printed and milled interim restoration resins showed higher flexural strength and modulus, and lower surface roughness than those prepared by the conventional method after accelerated aging.

• Journal of Mushroom
• /
• v.20 no.1
• /
• pp.13-21
• /
• 2022

Cordyceps militaris, a well-known traditional Chinese medicine, has multiple health-promoting effects. It is used as a herbal remedy and health food in Asian countries. Cultured mycelia are often used as a substitute for natural C. militaris. In the present study, the mycelia and fruiting bodies of artificially cultured C. militaris were analyzed using a metabolomics approach. The protein and crude fat contents of the mycelia were substantially higher than those of the fruiting bodies. The top three abundant amino acids in the mycelia were proline (3.9 g/100 g), aspartic acid (2.9 g/100 g), and glutamic acid (2.7 g/100 g). The carbohydrate content was similar in the fruiting bodies and mycelia. Analysis revealed that both the fruiting bodies and mycelia are rich in phenolic compounds and exhibit antioxidant activity. Further, six metabolites were significantly different between the mycelia and fruiting bodies. The levels of Ca, glucose, Mg, and Se were higher in the mycelia than in the fruiting bodies. In contrast, mannitol and Zn were more abundant in the fruiting bodies. The current study provides a comprehensive metabolic profile of the mycelia and fruiting bodies of artificially cultured C. militaris. Such an exercise is potentially important for understanding the metabolism of C. militaris and facilitating the use of cultured mycelia as a supplement to C. militaris fruiting bodies in traditional Chinese medicine.