• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.116-123
• /
• 2003

In this paper, we address the problem of designing multirate codes for a multiple-input and multiple-output (MIMO) system by restricting the receiver to be a successive decoding and interference cancellation type, when each of the antennas is encoded independently. Furthermore, it is assumed that the receiver knows the instantaneous fading channel states but the transmitter does not have access to them. It is well known that, in theory, minimummean- square error (MMSE) based successive decoding of multiple access (in multi-user communications) and MIMO channels achieves the total channel capacity. However, for this scheme to perform optimally, the optimal rates of each antenna (per-antenna rates) must be known at the transmitter. We show that the optimal per-antenna rates at the transmitter can be estimated using only the statistical characteristics of the MIMO channel in time-varying Rayleigh MIMO channel environments. Based on the results, multirate codes are designed using punctured turbo codes for a horizontal codedMIMOsystem. Simulation results show performances within about one to two dBs of MIMO channel capacity.

• 한국위성정보통신학회논문지
• /
• 제5권1호
• /
• pp.32-37
• /
• 2010

다중채널 신호처리 알고리즘은 사용 주파수 대역의 가변성, 효율적인 전송전력 할당, 서로 다른 전송률과 대역을 요구하는 서비스 형태를 충족시키기 위한 가변 주파수 대역 변환을 요구한다. 다중채널 시스템의 다중 반송파 신호에 대하여 역다중화/다중화화를 통한 주파수 대역 재할당의 방식에는 개별채널 방식, 다단트리 방식, 블록 방식이 있다. 본 논문에서는 다중 반송파 신호의 채널 대역을 가변할 수 있는 향상된 개별채널 처리 알고리즘을 제안한다. 제안된 알고리즘은 CIC 필터(cascaded integrator comb filter)와 half-band필터를 이용해 데시메이션(decimation)과 인터폴레이션(inter-polaration)을 수행하며, FIR low-pass필터를 통해 다중 반송파 신호에서 각 부채널을 필터링 (filtering)하여 채널 대역을 재할당한다. 전산모의 실험을 통해 역다중화와 다중화에 의해 가변 채널 대역의 변환이 효율적으로 이루어지는 것을 확인하였다.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제17권6호
• /
• pp.1620-1634
• /
• 2023

This paper studies the task of embedding nodes with multiple graphs representing multiple information channels, which is useful in a large volume of network clustering tasks. By learning a node using multiple graphs, various characteristics of the node can be represented and embedded stably. Existing studies using multi-channel networks have been conducted by integrating heterogeneous graphs or limiting common nodes appearing in multiple graphs to have similar embeddings. Although these methods effectively represent nodes, it also has limitations by assuming that all networks provide the same amount of information. This paper proposes a method to overcome these limitations; The proposed method gives different weights according to the source graph when embedding nodes; the characteristics of the graph with more important information can be reflected more in the node. To this end, a novel method incorporating a multi-channel gate layer is proposed to weigh more important channels and ignore unnecessary data to embed a node with multiple graphs. Empirical experiments demonstrate the effectiveness of the proposed multi-channel-based embedding methods.

• Journal of information and communication convergence engineering
• /
• 제7권4호
• /
• pp.480-488
• /
• 2009

A channel-shared modified accelerative pre-allocation wavelength division multiple access (CMAP-WDMA) media access control (MAC) has been proposed for metro-WDMA networks, as an extension of modified pre-allocation wavelength division multiple access (MAP-WDMA) MAC protocol. Similarly, CAP WDMA as an extension of accelerative pre-allocation wavelength division multiple access (AP-WDMA) MAC protocol. Performance of CMAP- and CAP-WDMA was extensively investigated under several channel sharing methods (CSMs), asymmetric traffic load patterns (TLPs), and non-uniform traffic distribution patterns (TDPs). The result showed that the channel utilization of the CMAP-WDMA always outperforms that of CAP-WDMA at the expense of longer channel access delay for channel shared case while CMAP-WDMA provided higher channel utilization at specific network conditions but always shorter channel access delay than CAP-WDMA for non-channel shared case. Additionally both for CMAP- and CAP-WDMA, determining an effective CSM is a critical design issue because TDPs and TLPs can be neither managed nor expected while CSM is manageable, and the CSM supporting the best channel utilization can be recommended.

• ETRI Journal
• /
• 제45권6호
• /
• pp.952-962
• /
• 2023

In this study, a space-time transmission scheme is proposed to tackle the limitations of channel estimation with orthogonal pilot information in colocated multiple-input multiple-output systems with several transmitting and receiving antennas. Channel information is obtained using orthogonal pilots. Channel estimation introduces pilot heads required to estimate a channel. This leads to bandwidth insufficiency. As a result, trade-offs exist between the number of pilots required to estimate a channel versus spectral efficiency. The detection of data symbols is performed using the maximum likelihood decoding method as it provides a consistent approach to parameter estimation problems. The moment-generating function of the instantaneous signal-to-noise ratio is used to drive an approximate expression of the symbol error rate for the proposed scheme. Furthermore, the order of diversity is less by one than the number of receiver antennas used in the proposed scheme. The effect of the length of a pilot sequence on the proposed scheme's performance is also investigated.

• 한국소음진동공학회논문집
• /
• 제16권11호
• /
• pp.1093-1099
• /
• 2006

In general, a measuring instrument of sound noise use only one wired channel by one sensor. Therefor the measuring instrument use wired cables as the number of channels are provided by instrument. In a point of observed target it needs data from multiple sensors and In case of measured point is a large numbers the environment of constitution would be complicated because that is in need of channel and cable. So we need the method that can improve the existing transmission channel and cable environment even the measured point is increased. If we use the Code Division Multiple Access(CDMA) we transmit a large numbers of sensor data by using a common transmission channel. We present the method that transmits data of multiple sensor to wireless by using CDMA. This method can simplify the measurement environment dramatically when collecting data by using multiple sensor. We expect this study to contribute the part of multiple access technology and relation technologies on the measuring environment.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.133-137
• /
• 2006

In general, a measuring instrument of sound noise use only one wired channel by one sensor. Therefor the measuring instrument use wired cables as the number of channels are provided by instrument. In a point of observed target it needs data from multiple sensors and In case of measured point is a large numbers the environment of constitution would be complicated because that is in need of channel and cable. So we need the method that can improve the existing transmission channel and cable environment even the measured point is increased. If we use the Code Division Multiple Access(CDMA) we transmit a large numbers of sensor data by using a common transmission channel. We present the method that transmits data of multiple sensor to wireless by using CDMA. This method can simplify the measurement environment dramatically when collecting data by using multiple sensor. We expect this study to contribute the part of multiple access technology and relation technologies on the measuring environment.

• Journal of Communications and Networks
• /
• 제15권4호
• /
• pp.338-351
• /
• 2013

Multiple-input multiple-output (MIMO) communication may provide high spectral efficiency through the deployment of a very large number of antenna elements at the base stations. The gains from massive MIMO communication come from the use of multi-user MIMO on the uplink and downlink, but with a large excess of antennas at the base station compared to the number of served users. Initial work on massive MIMO did not fully address several practical issues associated with its deployment. This paper considers the impact of channel aging on the performance of massive MIMO systems. The effects of channel variation are characterized as a function of different system parameters assuming a simple model for the channel time variations at the transmitter. Channel prediction is proposed to overcome channel aging effects. The analytical results on aging show how capacity is lost due to time variation in the channel. Numerical results in a multicell network show that massive MIMO works even with some channel variation and that channel prediction could partially overcome channel aging effects.

• 한국유통학회지:유통연구
• /
• 제11권1호
• /
• pp.69-97
• /
• 2006

본 연구는 전략적 관점에서 선택과 집중의 이슈를 복수유통경로 상황에 적용하여 복수유통경로를 활용하는 제조업자의 경로집중도 선행요인과 결과요인에 관한 모형을 검증하고자 하였다. 이를 위해 기존 연구를 바탕으로 경로집중도의 개념을 도입하고, 경로집중도 개념에 대한 측정지표를 개발하고, 실증적으로 검증하여 향후 경로관리연구에 응용할 수 있는 기반을 마련하고자 하였다. 또한, 복수유통경로구조를 설명하기 위해서 거래비용이론과 시장지배력이론을 검토하고 적용하여 복수유통경로구조에 대한 폭넓은 이해를 제공하고자 하였다. 마지막으로, 이러한 연구결과를 바탕으로 복수유통경로상에서 경로관리전략을 수립하는 기업들에게 실무적 시사점을 제공하고자 하였다. 이런 연구목적 달성을 위하여 문헌연구를 통해 가설을 도출하였으매, 국내 소비재 제조기업 표본 248개를 대상으로 실증분석을 하였다. 마지막으로 본 연구의 이론적 시사점과 실무적 시사점을 제시하였으며, 연구의 한계점과 미래 연구방향에 대해서 논의하였다.

• Journal of Communications and Networks
• /
• 제5권2호
• /
• pp.167-173
• /
• 2003

We treat the problem of channel estimation and interference cancellation in multiuser ultra-wide-band (UWB) communication systems over multipath fading channels. The UWB system under consideration employs a random time-hopping impulse radio format. We develop a channel estimation method based on linear weighted algorithm. An iterative channel estimation and interference cancellation scheme is proposed to successively improve the receiver performance. We also consider systems employing multiple transmit and/or receive antennas. For systems with multiple receive antennas, we develop a diversity receiver for the wellseparated antennas. For systems with multiple transmit antennas, we propose to make use of Alamouti’s space-time transmission scheme, and develop the corresponding channel estimation and interference cancellation receiver techniques. Simulation results are provided to demonstrate the performance of various UWB receiver techniques developed in this paper.