• Journal of Institute of Control, Robotics and Systems
• /
• v.8 no.9
• /
• pp.818-826
• /
• 2002

Since multipath phenomenon frequently occurs when a Global Positioning System receiver is placed in urban area crowded with large buildings, efficient mitigation of multipath effects is necessary to resolve. In this paper, we propose a new multipath detection technique that is useful in real-time positioning with a general Global Positioning System receiver. The proposed technique is based on a channelwise multipath test statistic that efficiently indicates the degree of fluctuations induced by multipath error. The proposed multipath test statistic is operationally advantageous because it does not require any specialized hardware nor any pre-computation of receiver position, it is directly related to standard $\chi$$^2$-distributions, and it can adjust the detection resolution by increasing the number of successive measurements. Simulation and experiment results verify the performance of the proposed multipath detection technique.

• Journal of Advanced Navigation Technology
• /
• v.28 no.1
• /
• pp.155-158
• /
• 2024

Multipath, a major error source in urban GNSS positioning (global navigation satellite system), pose a challenge due to its site-dependent nature, varying with the user's signal reception environment. In our previous study, we introduced a technique generating GNSS multipath map in urban canyon. However, due to uncertainty in initial GNSS positions, applying multipath maps required generating multiple candidate positions. In this study, we present an efficient method for applying multipath maps by projecting the multipath correction in position domain. This approach effectively applies multipath maps, addressing the challenges posed by urban user position uncertainties.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.27 no.2
• /
• pp.156-166
• /
• 2024

This paper conducts a study on methods for associating multipath tracks received by a horizontal line array sonar. The horizontal line array sonar introduces conical bearing ambiguities due to its array-shaped characteristics. Target signals are often subject to multipath propagation in the ocean, resulting in errors in target bearing estimation due to these bearing ambiguities. Recent research efforts have been directed toward using multipath tracks to estimate the positions of targets. However, there has been a lack of research dedicated to identifying multipath tracks from the measurements of a horizontal line array sonar. Therefore, this study identifies the conical bearing characteristics of multipath signals based on the result of experiment and establishes criteria for associating multipath tracks. Additionally, Simulations are performed to determine the ability to associate multipath tracks.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.1 no.1
• /
• pp.95-104
• /
• 1997

This paper deals with an analysis of multipath which affect a transmission performance in underwater acoustic channel. For the test of autonomous underwater vehicle(AUV), underwater acoustic channel with multipath structure is introduced to mathmatical modelling for a basin environment. In this paper, SMR(Signal to Multipath Ratio) which is defined as a parameter of mulipath's effect is presented as a mathmatical equation, and the equation or SMR is simulated by MATLAB program.

• Journal of Positioning, Navigation, and Timing
• /
• v.7 no.4
• /
• pp.267-275
• /
• 2018

The reference stations in a satellite-based augmentation system (SBAS) collect raw data from global navigation satellite system (GNSS) to generate correction and integrity information. The multipath signals degrade GNSS raw data quality and have adverse effects on the SBAS performance. The currently operating SBASs (WAAS and EGNOS, etc.) survey existing commercial equipment to perform multipath assessment around the antennas. For the multi-path assessment, signal power of GNSS and multipath at the MEDLL receiver of NovAtel were estimated and the results were replicated by a ratio of signal power estimated at NovAtel Multipath Assessment Tool (MAT). However, the same experiment environment used in existing systems cannot be configured in reference stations in Korean augmentation satellite system (KASS) due to the discontinued model of MAT and MEDLL receivers used in the existing systems. This paper proposes a test environment for multipath assessment around the antennas in KASS Multipath Assessment Tool (K-MAT) for multipath assessment. K-MAT estimates a multipath error contained in the code pseudorange using linear combination between the measurements and replicates the results through polar plot and histogram for multipath assessment using the estimated values.

• Journal of Positioning, Navigation, and Timing
• /
• v.9 no.2
• /
• pp.71-77
• /
• 2020

KRS which is subsystem of Korea Augmentation Satellite System (KASS) performs a role of collecting and monitoring GPS signals. In order to generate the accurate correction message, the site which meets the requirements should be selected and verification to meet each requirement should be accompanied. When the sites are selected, the environmental considerations are EMI, clear horizon (CH) and multipath. Of these, EMI and CH can be checked for satisfaction by instrumentation, but multipath error is difficult to predict. Therefore, multipath error analysis for the installation position of actual antenna at each KRS site should be preceded, and multipath scenario should be generated for each location to analyze the effects of the resulting system performance. In this paper, based on satellite signals collected from each KRS sites, the method for analyzing multipath error in each KRS sites is described, and the multipath error is analyzed. Also to perform an analysis of the effects on system performance due to multipath error, multipath error modeling is performed for the generation of simulation scenarios.

• Proceedings of the IEEK Conference
• /
• 2001.06a
• /
• pp.353-356
• /
• 2001

In WCDMA systems, it is difficult to use high level modulation schemes in Rayleigh fading channel. Components of Multipath interference give signals much inteferences. Multipath interference cancellation is one of the method to overcome this problem. In this paper, multistage PIC algorithm is used to verify a performance of multipath interference cancellation. It is algorithm gradually canceling the multipath interferences as a stage number is increases. In computer simulations, it is verified that multipath interference cancelation is necessary and using its algorithm give much better performances than not using.

• KIPS Transactions on Computer and Communication Systems
• /
• v.5 no.12
• /
• pp.455-462
• /
• 2016

Wireless sensor networks have been researched to gather data about events on sensor fields from sources at sinks. Multipath routing is one of attractive approaches to reliably send data against the problem of frequent breakages on paths from sources to sinks due to node and link failures. As mobile events such as humans, animals, and vehicles are considered, sources may be continuously generated according to the movement of the mobile event. Thus, mobile events provide new challenging issue in multipath routing. However, the research on multipath routing mainly focus on both efficient multipath construction from sources to static sinks and fast multipath reconstruction against path breakages. Accordingly, the previous multipath routing protocols request each source continuously generated by a mobile event to construct individual multipath from the source to sinks. This induces the increase of multipath construction cost in the previous protocols in proportion to the number of source. Therefore, we propose efficient multipath routing protocol for supporting continuous sources generated by mobile events. In the proposed protocol, new source efficiently reconstructs its multipath by exploiting the existing multipath of previous sources. To do this, the proposed protocol selects one among three reconstruction methods: a local reconstruction, a global partial one, and a global full one. For a selection decision, we provide an analytical energy consumption cost model that calculates the summation of both the multipath reconstruction cost and the data forwarding cost. Simulation results show that the proposed protocol has better performance than the previous protocol to provide multipath routing for mobile events.

• Journal of Positioning, Navigation, and Timing
• /
• v.13 no.1
• /
• pp.85-92
• /
• 2024

This study develops a Global Positioning System (GPS) Code Multipath Grid Map (CMGM) of each individual domestic reference station from the extracted code multipath of measurement data. Multipath corresponds to signal reflection/refraction caused by obstacles around the receiver antenna, and it is a major source of error that cannot be eliminated by differencing. From the receiver-independent exchange format (RINEX) data for two days, the associated code multipath of a satellite tracking arc is extracted. These code multipath data go through bias correction and interpolation to yield the CMGM with respect to the azimuth and elevation angles. The effect of the CMGM on multipath mitigation is then quantitatively analyzed to improve the Root Mean Square (RMS) of averaged pseudo multipath. Furthermore, the single point positioning (SPP) accuracy is analyzed in terms of the RMS of the horizontal and vertical errors. During two weeks in February 2023, the RMSs of the averaged pseudo multipath for five reference stations decreased by about 40% on average after CMGM application. Also, the SPP accuracies increased by about 7% for horizontal errors and about 10% for vertical errors on average after CMGM application. The overall quantitative analysis indicates that the proposed approach will reduce the convergence time of Differential Global Navigation Satellite System (DGNSS), Real-Time Kinematic (RTK), and Precise Point Positioning (PPP)-RTK correction information in real-time to use measurement data whose code multipath is corrected and mitigated by the CMGM.

• Journal of Korea Society of Digital Industry and Information Management
• /
• v.11 no.3
• /
• pp.79-90
• /
• 2015

Multipath routing technique is recognized as one of the effective approaches to improve the reliability of data forwarding. However, the traditional multipath routing focuses only on how many paths are needed to ensure a desired reliability. For this purpose, the protocols construct additional paths and thus cause significant energy consumption. These problems have motivated the study for the energy-efficient and reliable data forwarding. Thus, this paper proposes an energy-efficient concurrent multipath routing protocol with a small number of paths based on interaction between paths. The interaction between paths helps to reinforce the multipath reliability by making efficient use of resources. The protocol selects several nodes located in the radio overlapped area between a pair of paths as bridge nodes for the path-interaction. In order to operate the bridge node efficiently, when the transmission failure has detected by overhearing at each path, it performs recovery transmission to recover the path failure. Simulation results show that proposed protocol is superior to the existing multipath protocols in terms of energy consumption and delivery reliability.