• Journal of Power Electronics
• /
• 제10권4호
• /
• pp.365-373
• /
• 2010

This paper proposes a hybrid single carrier sinusoidal modulation suitable for multiphase multilevel inverters. Multiphase multilevel inverters are controlled by hybrid modulation to provide multiphase variable voltage and a variable frequency supply. The proposed modulation combines the benefits of fundamental frequency modulation and single carrier sinusoidal modulation (SC-SPWM) strategies. The main characteristics of hybrid modulation are a reduction in switching losses and improved harmonic performance. The proposed algorithm can be applied to cascaded multilevel inverter topologies. It has low computational complexity and it is suitable for hardware implementations. SC-SPWM and its base modulation design are implemented on a TMS320F2407 digital signal processor (DSP). A Complex Programmable Logic Device realizes the hybrid PWM algorithm and it is integrated with a DSP processor for hybrid SC-SPWM generation. The feasibility of this hybrid modulation is verified by spectral analysis, power loss analysis, simulation and experimental results.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2000년도 전력전자학술대회 논문집
• /
• pp.262-265
• /
• 2000

This paper presents analysis of control characteristics of high power hybrid multilevel PWM rectifier without bulky and heavy isolation transformers. It will be shown that the DC voltages for multilevel output generation may be directly built up from AC utility source. The multilevel PWM rectifier is analyzed by using the circuit DQ transformation whereby the static and dynamic characteristics and some useful design equations are obtained. Finally to confirm the validity of the analysis MATLAB simulation are carried out.

• 한국정보통신학회:학술대회논문집
• /
• 한국해양정보통신학회 2000년도 추계종합학술대회
• /
• pp.573-576
• /
• 2000

In this paper, analysis of operating characteristics of hybrid cascade multilevel PWM rectifier without bulky and heavy isolation transformers is presented. The multilevel PWM rectifier is analyzed by using the circuit DQ transformation whereby the static and dynamic characteristics and some useful design relationships are obtained. Then, the operating characteristics such as active/reactive power relationships with respect to control variables, DC voltages build up are presented. It will be shown that the DC voltages for the multilevel output generation may be directly built up from AC utility source. Finally, to confirm the validity of the analysis, MATLAB simulations are tarried out.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2002년도 봄 학술발표회 논문집
• /
• pp.249-256
• /
• 2002

A new optimization procedure with approximate reanalysis module, using the staged hybrid methods with substructuring, is proposed in is study. In this procedure, displacements are calculated with two step mixed procedures. First step is to introduce the conservative approximation, which is a hybrid form of the linear and reciprocal approximation, as local approximation. In the next step, it is combined with the global approximation by reduced basis approach. The quality of reanalyzed quantities can be greatly improved through these staged hybrid approximations, specially for large changes in the design. Overall procedures are based on substructuring scheme. Several numerical examples illustrate the validity and effectiveness of the proposed methods.

• Journal of Power Electronics
• /
• 제13권1호
• /
• pp.59-69
• /
• 2013

An alternative technique to control multilevel inverters with vector approximations has been presented. The innovative control method utilizes specially designed two-dimensional hysteresis comparators to simplify the implementation and improve the resultant waveform. The multistage inverter designed with maximum number of levels is operated in such a way to approximate the reference voltage vector by exploiting the large number of multilevel inverter vectors. A three-stage inverter with the main high voltage stage made of three phase, six-switch and singly-fed inverter is considered for application to the proposed design. The proposed control concept is to maintain a higher voltage stage state as long as it can lead to a target vector. High and medium voltage stages controllers are based on surface hysteresis comparators to hold the switching state or to perform the necessary change to achieve its reference voltage with minimal switching losses. The low voltage stage controller is designed to approximate the target reference voltage to the nearest inverter vector using the nearest integer rounding and adjustment comparators. Model simulation and prototype test results show that the proposed control technique clearly outperforms the previous control methods.

• 한국농공학회논문집
• /
• 제46권1호
• /
• pp.41-51
• /
• 2004

FRP re-bar in concrete structures could be used as a substitute of steel re-bars for that cases in which aggressive environment produce high steel corrosion, or lightweight is an important design factor, or transportation cost increase significantly with the weight of the materials. But FRP fibers have only linearly elastic stress-strain behavior; whereas, steel re-bar has linear elastic behavior up to the yield point followed by large plastic deformation and strain hardening. Thus, the current FRP re-bars are not suitable concrete reinforcement where a large amount of plastic deformation prior to collapse is required. The main objectives of this study in to evaluate the tensile behavior and the fracture mode of hybrid FRP re-bar. Fracture mode of hybrid FRP re-bar is unique. The only feature common to the failure of the hybrid FRP re-bars and the composite is the random fiber fracture and multilevel fracture of sleeve fibers, and the resin laceration behavior in both the sleeve and the core areas. Also, the result of the tensile and interlaminar shear stress test results of hybrid FRP re-bar can provide its excellent tensile strength-strain and interlaminar stress-strain behavior.

• Journal of Power Electronics
• /
• 제19권6호
• /
• pp.1486-1495
• /
• 2019

Dealing with the DC link fault poses a technical problem for an HVDC based on a modular multilevel converter. The fault suppressing mechanisms of several sub-module topologies with DC fault current blocking capacity are examined in this paper. An improved half-bridge sub-module topology with double direction control switch is also designed to address the additional power consumption problem, and a sub-module topology called hybrid double direction blocking sub module (HDDBSM) is proposed. The DC fault suppression characteristics and sub-module capacitor voltage balance problem is also analyzed, and a self-startup method is designed according to the number of capacitors. The simulation model in PSCAD/EMTDC is built to verify the self-startup process and the DC link fault suppression features.

• 한국전산구조공학회논문집
• /
• 제12권3호
• /
• pp.397-406
• /
• 1999

본 연구는 부구조화에 기초한 다단계 혼성 구조 재해석방법을 제시한다. 부구조화의 틀에 보존근사화의 각 항을 차원축소법의 기저로 한 보존 전역-부분근사화에 의하여 변위 산정의 정확성과 효율성을 확보하고, 이를 바탕으로 이미 구성된 응력-변위 관계식을 병용하는 혼성방식을 통하여 전체 설계의 중간 단계에서 반복되는 재해석 과정의 신뢰성을 높인다. 전체적으로 선형근사화와 상반근사화를 교차적용하는 1단계 보존근사화로부터 전역 근사화와 결합하여 구하는 변위산정과 그에 종속되는 행렬연산으로 산출하는 응력계산의 3단계로 이루어지는 본 방법은 대형 구조계를 대상으로 하여, 해석의 기본 틀로 부구조화 방법을 택하였으며, 몇 개의 예제들을 통하여 타당성 및 유용성을 검증하였다.

• 한국정보통신학회논문지
• /
• 제4권4호
• /
• pp.817-824
• /
• 2000

본 논문은 절연변압기를 사용하지 않는 하이브리드 멀티레벨 PWM 정류기(특히 5-레벨)의 회로 DQ 모델링 및 동작특성 해석에 대한 연구이다. 회로 DQ 변환은 동기속도로 회전하는 변환 행렬을 사용함으로써 3상 시변 회로를 정지된 등가회로로 변환한다. 이러한 회로 DQ 변환을 통해 얻은 등가회로를 사용하여 시스템의 동작 특성 및 유용한 설계식들을 보다 쉽게 얻을 수 있다. 즉, 각 DC 커패시터 전압 및 전원이 공급하는 유효전력, 무효전력과 제어변수의 해석적인 식들을 보이고, 나아가 멀티레벨 출력을 얻기 위한 각 DC 전압들을 AC 전원으로부터 직접 build-up 할 수 있음을 제시한다. 또한 5-레벨 출력전압을 보장하기 위한 제어식을 유도한다. 끝으로, 이러한 모델링 및 해석의 타당성을 검증하기 위하여 MATLAB을 사용한 모의 실험을 행하고, 해석적인 예측과 모의실험으로 얻어진 파형의 일치성을 확인하였다.

• 한국전산구조공학회:학술대회논문집
• /
• 한국전산구조공학회 2005년도 춘계 학술발표회 논문집
• /
• pp.663-671
• /
• 2005

Distributed operation of overall structural design process, by which product and process optimization are implemented, is presented in this paper. The database-interconnected multilevel hybrid method, in which the conventional design method and the optimal design approach are combined, is utilized there. The method selectively takes the accustomed procedure of the conventional method in the conceptional framework of the optimal design. Design conditions are divided into primary and secondary criteria This staged application of design conditions reduces the computational burden for large complex optimization problems. Two kinds of numeric and graphic processes, are simultaneously implemented on the basis of concurrent engineering concepts in the distributed environment of PC networks. Numerical computation on server and graphic works on independent client are communicated through message passing. Numerical design is based on the optimization methodology and the drawing process is carried out by AutoCAD using the AutoLISP programming language. The prototype design experimentation for some steel trusses shows the validity and usability of the method. This study has sufficient adaptability and expandability in methodology, in that it is based on general theory and industry standard systems.