• 멤브레인
• /
• 제25권5호
• /
• pp.391-397
• /
• 2015

다공성 지지체인 Polyvinylidene fluoride (PVDF) 중공사막에 염석법을 기반으로 하여 Polyethyleneimine (PEI)와 Polyvinylsulfonic acid (PVSA)를 가압법(phase separated and pressurization, PSP)으로 코팅시켜 다층막을 제조하였다. 이에 열처리 온도, 코팅농도, 유입수 농도, 가교시간 및 가교제 농도에 대하여 NaCl 100 ppm을 공급액으로 하여 4 atm에서 투과도와 제거율을 알아보고자 하였다. 가장 좋은 결과로는 PEI 20,000 ppm과 PVSA 1,000 ppm, PEI 15%에 말산 2% 수용액으로 가압코팅 후 열처리하였을 때 투과도 24.3 LMH, 제거율 82.1%의 결과를 얻을 수 있었다.

• 멤브레인
• /
• 제6권4호
• /
• pp.213-218
• /
• 1996

중합반응을 할 수 있는 vinyl 기와 콜레스테롤 기를 갖는 계면활성제들을 합성하고, 이 계면활성제들을 물 속에서 sonication하여 vesicle 용액을 형성한 다음, 이 용액을 건조하여 분자들이 규칙적으로 배열된 분자 다층 구조를 갖는 막을 합성하였다. 이 막들을 UV를 이용하여 중합한 다음 분자량을 측정하여 중합성을 살펴보았으며, X-ray diffractometer로 분석하여 다층 구조를 어느 정도 잘하고 있는지극 살펴 보았다.

• Bulletin of the Korean Chemical Society
• /
• 제29권4호
• /
• pp.842-846
• /
• 2008

Layer-by-layer assembled multilayers of poly(ethersulfone)s were deposited on the surface of Nafion membrane for the application of direct methanol fuel cells (DMFC). Aminated poly(ethersulfone) (APES) and sulfonated poly(ethersulfone) (SPES) were used as a polycation and a polyanion for fabrication of the multilayer films. UV/Vis absorption spectroscopy verified a linear build-up of the multilayers of APES and SPES on the surface of Nafion. Thin multilayer films deposited on the Nafion membrane enabled methanol permeability of the membrane to decrease by 78% in comparison with the pristine Nafion. The performance of DMFCs in concentrated methanol was highly enhanced by using the multilayer modified Nafion.

• 한국재료학회지
• /
• 제20권4호
• /
• pp.187-193
• /
• 2010

Chromium nitride (CrN) samples with two different layer structures (multilayer and single layer) were coated on bipolar plates of polymer electrolyte membrane fuel cells (PEMFC) using the reactive sputtering method. The effects with respect to layer structure on corrosion resistance and overall cell performance were investigated. A continuous and thin chromium nitride layer ($Cr_{0.48}\;N_{0.52}$) was formed on the surface of the SUS 316L when the nitrogen flow rate was 10 sccm. The electrochemical stability of the coated layers was examined using the potentiodynamic and potentiostatic methods in the simulated corrosive circumstances of the PEMFC under $80^{\circ}C$. Interfacial contact resistance (ICR) between the CrN coated sample and the gas diffusion layer was measured by using Wang's method. A single cell performance test was also conducted. The test results showed that CrN coated SUS316L with multilayer structure had excellent corrosion resistance compared to single layer structures and single cell performance results with $25\;cm^2$ in effective area also showed the same tendency. The difference of the electrochemical properties between the single and multilayer samples was attributed to the Cr interlayer layer, which improved the corrosion resistance. Because the coating layer was damaged by pinholes, the Cr layer prevented the penetration of corrosive media into the substrate. Therefore, the CrN with a multilayer structure is an effective coating method to increase the corrosion resistance and to decrease the ICR for metallic bipolar plates in PEMFC.

• 한국재료학회지
• /
• 제20권9호
• /
• pp.451-456
• /
• 2010

A promising candidate material for a $H_2$ permeable membrane is SiC due to its many unique properties. A hydrogen-selective SiC membrane was successfully fabricated on the outer surface of an intermediate multilayer $\gamma-Al_2O_3$ with a graded structure. The $\gamma-Al_2O_3$ multilayer was formed on top of a macroporous $\alpha-Al_2O_3$ support by consecutively dipping into a set of successive solutions containing boehmite sols of different particle sizes and then calcining. The boehmite sols were prepared from an aluminum isopropoxide precursor and heated to $80^{\circ}C$ with high speed stirring for 24 hrs to hydrolyze the precursor. Then the solutions were refluxed at $92^{\circ}C$ for 20 hrs to form a boehmite precipitate. The particle size of the boehmite sols was controlled according to various experimental parameters, such as acid types and acid concentrations. The topmost SiC layer was formed on top of the intermediate $\gamma-Al_2O_3$ by pyrolysis of a SiC precursor, polycarbosilane, in an Ar atmosphere. The resulting amorphous SiC-on-$Al_2O_3$ composite membrane pyrolyzed at $900^{\circ}C$ possessed a high $H_2$ permeability of $3.61\times10^{-7}$ $mol{\cdot}m^{-2}{\cdot}s^{-1}{\cdot}Pa^{-1}$ and the $H_2/CO_2$ selectivity was much higher than the theoretical value of 4.69 in all permeation temperature ranges. Gas permeabilities through a SiC membrane are affected by Knudsen diffusion and a surface diffusion mechanism, which are based on the molecular weight of gas species and movement of adsorbed gas molecules on the surface of the pores.

• 한국군사과학기술학회지
• /
• 제16권4호
• /
• pp.553-559
• /
• 2013

We make several membranes with multilayer structure and characterize protective performance in various ways. Multilayer membrane is composed of shell fabric, support membrane, functional polymer membrane and liner fabric. In this research, we apply cellulose acetate derivatives as base polymer in functional polymer membrane and characterize water resistance, water vapor permeation, protective performance against DMMP and aerosol. Test results show that cellulose based polymer with polyethyleneimine possess performance with good water vapor permeation and excellent protective capability against DMMP equivalent to Saratoga type's protective suits. Also, these materials possess aerosol protective performance and water resistance.

• 공업화학
• /
• 제7권6호
• /
• pp.1142-1146
• /
• 1996

콜레스테롤을 갖는 계면활성제를 합성하고, 이 계면활성제를 단량체와 함께 물 속에서 음파파쇄(sonication)하여 막소포(vesicle)용액을 형성한 다음, 이 용액을 건조하여 분자들이 규칙적으로 배열된 분자 다층 구조를 갖는 막을 합성하였다. 이 막에 들어 있는 단량체들을 UV를 이용하여 중합하여 고분자가 층과 층 사이에 들어 있는 분자 다층 구조를 합성하였다. 중합이 끝난 후 유기 용매를 사용하여 계면활성제를 추출하여 2차원적인 구조를 갖는 초박막 층으로 이루어진 고분자 막을 합성하였다. 분자 다층 구조들을 X-ray Diffractometer로 분석하여 다층 구조를 어느 정도 잘 하고 있는지를 살펴보았으며, 유기 용매로 계면활성제를 추출해내고 나서 남은 고분자 막의 절단한 면을 SEM으로 살펴 보았다.

• 공업화학
• /
• 제9권5호
• /
• pp.763-767
• /
• 1998

콜레스테롤을 갖는 계면활성제를 합성하고, 이 계면활성제를 단량체[tetradeca(ethylene glycol) diacrylate]와 함께 물 속에서 음파 파쇄하여 vesicle 용액을 형성한 다음, 이 용액내의 물을 증발시켜, 분자들이 규칙적으로 배열된 분자 다층 구조를 갖는 막을 합성하였다. 이 막에 들어 있는 단량체들을 광중합하여, 고분자가 계면활성제들의 층과 층 사이에 들어 있는 분자 다층 구조를 합성하였다. 중합이 끝난 후 유기 용매를 사용하여 계면활성제를 추출하여 이차원적인 구조를 갖는 얇은 박막 층으로 이루어진 고분자 막을 합성하였다. 형성된 이차원 구조를 갖는 고분자 막의 물성을 측정하였는데, 막의 물성으로는 인장 강도, 신장율, 팽윤 등을 측정하였다.

• 한국막학회:학술대회논문집
• /
• 한국막학회 2004년도 추계 총회 및 학술발표회
• /
• pp.142-145
• /
• 2004

Anion-exchange porous hollow-fiber membranes with a thickness of about 1.2 mm and a pore size of about $0.30{\mu}m$ were used as a supporting matrix to immobilize cycloisomaltooligosaccharide glucanotransferase (CITase). CITase was immobilized to the membrane via anion-exchange adsorption and by subsequent enzymatic cross-linking with transglutaminase, the amount of which ranged from 3 to 110 mg per g of the membrane. The degree of enzyme multilayer binding was equivalent to 0.3 to 9.8. Dextran, as the substrate, was converted into seven- to nine-glucose-membered cycloisomaltooligosaccharides (CI-7, -8, and -9) at a maxi mum yield of $28\%$ in weight at a space velocity of 10 per hour during the permeation of $2.0(w/w)\%$ dextran solution across the CITase-immobilized porous hollow-fiber membrane.

• 한국진공학회지
• /
• 제4권S2호
• /
• pp.30-33
• /
• 1995

By using X-ray double crystal diffraction technique the multilayer structure composed of glass membrane, platinum film and $\alpha Al_2O_3$ substrate has been studied. It is found the stress is produced in the film by thermal mismatch within multilayer materials. The measuring results of thin film platinum resistors show that the stress were induce resistance change of device and different stress status will produce add resistance in different direction. Selecting proper glass material can make opposite stress in Pt film and opposite add resistance due to thermal mismatch. The reliability of Pt resistor has been improved with method of this stress compensation.