• Bulletin of the Korean Chemical Society
• /
• v.7 no.5
• /
• pp.403-405
• /
• 1986

• Proceedings of the Korean Vacuum Society Conference
• /
• 2012.08a
• /
• pp.126-126
• /
• 2012

In past decades, the themal inkjet (TIJ) printer has been widely used as one of the most well-known digital printing technology due to its low cost, and high printing quality. Since the printing speed of TIJ printers are much slower than that of laser printers, however, there has been intensive efforts to raise the printing speed of TIJ printers. One of the most plausible methods to raise the printing speed of TIJ printers is to adopt a page-wide array TIJ printhead. To accomplish this goal, the high efficiency inkjet heating resistor films should be developed to settle the high power consumption problem of a page-wide array TIJ printhead. In this study, we investigated noble metal based multicomponent thin film resistor films prepared by atomic layer deposition (ALD) for a high efficiency inkjet printhead. Design concept, preparation, material properties of noble metal based multicomponent thin films will be discussed in terms of mutlfunctionality.

• 제어로봇시스템학회:학술대회논문집
• /
• 1996.10a
• /
• pp.295-298
• /
• 1996

In distillation column control, secondary measurements such as temperatures and flows are widely used in order to infer product composition. This paper addresses the design of static estimators using the secondary measurements for estimating the product compositions of the multicomponent distillation columns. Based on the unified framework for the estimator problems, the relationships among several typical static estimators are discussed including the effect of the measured inputs. Design guidelines for the composition estimator using PLS regression are also presented. The estimator based on the guidelines is robust to sensor noise and has a good predictive power.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2005.05a
• /
• pp.233-236
• /
• 2005

Polarization filtering based on the multicomponent complex trace analysis method is performed to reject Rayleigh waves and to enhance S waves. To test the polarization filter, synthetic seismic data were constructed for a simple two-layer model based on the finite difference method. Rayleigh waves with elliptic motion are eliminated effectively and P and S waves with linear motions are well separated each other.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.58-63
• /
• 2000

The preparation of Y-doped $SrZrO_3$powder by ultrasonic spray pyrolysis was investigated as a representative system, in order to produce fine, single phase multicomponent oxide powders. A precursor solution containing metal nitrates, citric acid and ethylene glycol was atomized glycol was atomized with an ultrasonic spray nozzle. Gel particles formed by organic functional groups were pyrolyzed and subsequently calcined at $800^{\circ}C$ to obtain well-crystallized, single perovskite phase. Most of large particles exhibited macroscopic pores and weak agglomeration between primary particles. However, strong agglomeration was observed in the surfaces of large particles. The effect of the microstructures of these particles on size reduction to submicron particles was described.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1994.11a
• /
• pp.21-23
• /
• 1994

By adding La₂O₃ to optical multicomponent glass composition, after making mother glass and core fiber that enable to enlarge the infrared transmittance region, then surveyed the optical properties. Through thermal analysis of the glass abstained by melt-quenching after selecting stable basic composition on devitrification and replace SiO₂ by 4-12wt% La₂O₃. As La₂O₃ increases up to l2wt% transition temperature, refractive index, density, deformation temperature increased, whereas thermal expansion coefficient decreased. As a result of inspectig transmittance in UV/VIS/IR region, visable region indicated the decrease of transmittance by increasing the La₂O₃ and transmittance region was enlarged by increasing the La₂O₃ in IR region. Also, fabricate core fiber at 820℃ and severy the optical loss we could fact that La₂O₃ composition added 12wt% showed the minimum optical loss.

• Journal of environmental and Sanitary engineering
• /
• v.16 no.1
• /
• pp.66-71
• /
• 2001

The objective of this study was to depict the kinetic behavior of the platinum catalyst for the deep oxidation of aromatic solvents and their binary mixtures. The oxidation kinetics of aromatic solvents, which were benzene, toluene and m-xylene, was studied on a 0.5% $Pt/{\gamma}-Al_2O_3$ catalyst. Deep oxidation of binary mixtures, which were 1:1 in volume, was carried out and the inlet concentration was controlled in the range of 133 and 333ppmv. An approach based on the two-stage redox model was used to analysis the results. The deep oxidation conversion of aromatic solvents was inversely proportional to inlet concentration in plug flow reactor. This trend is due to the zeroth-order kinetics with respect to inlet concentration. The kinetic parameters of multicomponent model were independently evaluated from the single compound oxidation experiments. A simple multicomponent model based on two-stage redox rate model made reasonably good predictions of conversion over the range of parameters studied.

• The Korean Journal of Rheology
• /
• v.9 no.4
• /
• pp.133-139
• /
• 1997

PC(polycarbonate), SAN(styren-acrylonitrile)공중합체, 그리고 충격 보강제를 근간 으로 하는 다성분계 고분자 블렌드에 대하여 고정된 사출조건에서 블렌드의 조성에 따른 weldline강도의 변화를 조사하였다. 블렌드의 전체적인 함량에 있어서 PC가 그함량이 높아 연속상이 되는 경우가 비교적 높은 weldline강도를 나타내지만 PC함량이 감소함에 따라서 급격한 저하가 발생하여 채-continuity의 성향이 강한 50%부근에서 최소 값을 보였다. PC 함량이 고정되었을 때에는 분산상의 점도가 증가할수록 weldline 강도가 향상되었는데 이는 weldline의 형성 시에 발생하는 분수형 흐름장에 의한 분산상의 배향이 억제되어 외부 응력 에 대하여 균일하게 대응할수 있는 형태학을 유지하는 효과로 설명된다. 충격보강제의 변경 과 상용화제의 적용으로부터 얻은 결과를 종합하여 볼 때 다성분계 고분자 블렌드의 weldline강도는 구성성분간의 상용성 뿐만 아니라 유변학적인 조건이 만족되어야 효과적으 로 향상될수 있다.

• YAKHAK HOEJI
• /
• v.41 no.5
• /
• pp.638-646
• /
• 1997

The steroid 9${alpha}$-hydroxylase activity has been detected in cytosol fraction, $100,00{\times}g$ supernatant of cell free extract of Mycobacterium fortuitum. The activity was not linear with protein concentration in the assay suggesting 9${alpha}$-hydroxylase is a multicomponent enzyme. The 9${alpha}$-hydroxylase system was partially purified through fractional saturation of ammonium sulfate, strong anion exchange (Mono Q) column chromatography, gel filtration (Superose 12) column chromatography, and testosterone affinity gel chromatography. Ammonium sulfate 50~60% saturated fraction of the cytosol gave 9${alpha}$-hydroxylase activity. For further purification, the half-saturated ammonium sulfate fraction was applied to Mono Q, Superose 12, or affinity gel column. The purification factors of 9${alpha}$-hydroxylase containing fraction after Mono Q, Superose 12, and affinity gel chromatography was 13, 11, and 17 respectively.

• Journal of the Korean Geophysical Society
• /
• v.8 no.1
• /
• pp.35-38
• /
• 2005

Polarization filtering based on the multicomponent complex trace analysis method is performed to reject Rayleigh waves and to enhance S waves. To test the polarization filter, synthetic seismic data were constructed for a simple two-layer model based on the finite difference method. Rayleigh waves with elliptic motion are eliminated effectively and P and S waves with linear motions are well separated each other.