• Nuclear Engineering and Technology
• /
• 제52권1호
• /
• pp.37-50
• /
• 2020

A passive containment cooling system (PCCS) has been developed as advanced safety feature for innovative power reactor (iPOWER). Passive systems are inherently less stable than active systems and the PCCS encountered the flashing-induced instability previously identified. The objective of this study is to develop stability maps for flashing-induced instability using MARS (Multi-dimensional Analysis of Reactor Safety) code. Firstly, we conducted a series of sensitivity analysis to see the effects of time step size, nodalization, and alternative MARS user options on the onset of flashing-induced instability. The riser nodalization strongly affects the prediction of flashing in a long riser of the PCCS, while time step size and alternative user options do not. Based on the sensitivity analysis, a standard input and an analysis methodology were set up to develop the stability maps of PCCS. We found out that the calculated equilibrium quality at the exit of the riser as a stability boundary above 5 kW/㎡ was approximately 1.2%, which was in good agreement with Furuya's results. However, in case of a very low heat flux condition, the onset of instability occurred at the lower equilibrium quality. In addition, it was confirmed that inlet throttling reduces the unstable region.

• Journal of Welding and Joining
• /
• 제27권6호
• /
• pp.31-35
• /
• 2009

When conducting CTOD test, especially in thick welded steel plate, fatigue pre-cracking occasionally failed to satisfy the requirements of standards thus making the test result invalid. Internally accumulated residual stress of test piece has been thought as one of the main reasons. The propagation of fatigue crack, started from the tip of machined notch, which might have propagated irregularly due to residual stress field. To overcome this kind of difficulty three methods to modify the residual stress are suggested in standard i.e. local compression, reverse bending and stepwise high-R ratio method. In this paper not only multi pass welding but also local pre-compressing process of thick steel plate has been simulated using finite element method for clarifying variation of internal welding residual stress. The simulated results show that welding residual stress is compressive in the middle section of the model and it is predominantly increased after machining the specimen. Comparing as-welded state all component of the welding residual stress changing to compressive in the tip of machine notch whereas residual stress of the outer area remain as tensile condition relatively. Analysis results also show that this irregular residual stress distribution is improved to be more uniformly by applying local compression.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2013년도 추계학술대회 논문집
• /
• pp.763-764
• /
• 2013

A three-dimensional image capturing device and its signal processing algorithm and apparatus are presented. Three dimensional information is one of emerging differentiators that provides consumers with more realistic and immersive experiences in user interface, game, 3D-virtual reality, and 3D display. It has the depth information of a scene together with conventional color image so that full-information of real life that human eyes experience can be captured, recorded and reproduced. 20 Mega-Hertz-switching high speed image shutter device for 3D image capturing and its application to system prototype are presented[1,2]. For 3D image capturing, the system utilizes Time-of-Flight (TOF) principle by means of 20MHz high-speed micro-optical image modulator, so called 'optical resonator'. The high speed image modulation is obtained using the electro-optic operation of the multi-layer stacked structure having diffractive mirrors and optical resonance cavity which maximizes the magnitude of optical modulation[3,4]. The optical resonator is specially designed and fabricated realizing low resistance-capacitance cell structures having small RC-time constant. The optical shutter is positioned in front of a standard high resolution CMOS image sensor and modulates the IR image reflected from the object to capture a depth image (Figure 1). Suggested novel optical resonator enables capturing of a full HD depth image with depth accuracy of mm-scale, which is the largest depth image resolution among the-state-of-the-arts, which have been limited up to VGA. The 3D camera prototype realizes color/depth concurrent sensing optical architecture to capture 14Mp color and full HD depth images, simultaneously (Figure 2,3). The resulting high definition color/depth image and its capturing device have crucial impact on 3D business eco-system in IT industry especially as 3D image sensing means in the fields of 3D camera, gesture recognition, user interface, and 3D display. This paper presents MEMS-based optical resonator design, fabrication, 3D camera system prototype and signal processing algorithms.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.869-872
• /
• 2005

This research studied robust design of column part for LCD transfer system. $1^{st}$ DOE(Design of Experiment)was conducted to find out main effect factors. 36 experiments were performed and their results were shows that the geometric parameters(Low-length, Side-length, Upper-thickness, Middle-thickness)are more important than other factors. The main effect plots shows that the maximum deflection of column is minimized with increasing Low-length, Side-length, under-thickness and Middle-thickness. $2^{nd}$ DOE was conducted to obtain RMS(Response Surface Method)equation 25 experiments were conducted. The CCD(Central Composite Design)technique with four factors were used. The coefficient of determination $(R^2)$ for the calculated RSM equation was 0.986. Optimum design was conducted using the RSM equation Multi-island genetic algorithm was used to optimum design. Optimum value for Low-length. Side-length, Upper-thickness and Middle-thickness were 299.8mm, 180.3mm, 21.7mm, 21.9mm respectively. An approximate value of 5.054mm in deflection was expected to be a maximum under the optimum conditions. Six sigma robust design was conducted to find out guideline for control range of design parameter. To acquire six sigma level reliability, the standard deviation of design parameter should be controlled within 2% of average design value.

• 인터넷정보학회논문지
• /
• 제11권1호
• /
• pp.1-13
• /
• 2010

네트워크 장비를 관리함에 있어서 환경에 따른 RED(Random Early Detection) 매개변수에 대한 설정은 쉽지 않은 일이다. 특히 관리자가 환경의 변화에 따라 일정한 서비스율을 유지하고 싶은 경우의 매개변수 설정은 더욱 쉽지 않은 일이다. 본 논문에서는 출력 큐에 멀티 코어 CPU를 탑재한 라우터를 가정하고 라우터의 출력 큐에, RED의 환경에 따른 매개변수의 최적화에 적합한 것으로 알려진, 인공지능의 유전 알고리즘을 직접적으로 도입하여 스스로 부하에 적응하는 AI RED(Artificial Intelligence RED)를 제안한다. AI RED는 FuRED(Fuzzy-Logic-based RED) 보다 단순하고 세밀하며, 실험을 통하여 AI RED가 찾아낸 RED 매개변수는 표준 RED 매개변수보다 환경에 더욱 잘 적응하는 효율적인 서비스를 제공하여 준다는 것을 확인 할 수 있다. RED 매개변수 관리의 자동화는 네트워크 관리의 측면에서 많은 효율성의 향상을 관리자에게 제공하여 줄 수 있다.

• 한국산학기술학회논문지
• /
• 제15권5호
• /
• pp.2567-2572
• /
• 2014

본 연구개발은 PCB소자 분리에 있어 개별적 레이저 커팅의 문제점을 개선하는 것으로, 다수개의 PCB소자가 결합된 PCB시트를 단시간에 커팅 할 수 있는 멀티지그 개발이 목적이다. 설계는 베이스프레임에 PCB서포터가 안착, 모델별 PCB서포터가 분리가능하게 설계 하였으며, 상부 레이저 투과공의 고정을 위하여 네오디움 자석을 양쪽에 각각 채택 지그를 완료 하였다. 개발성과는 하나의 베이스프레임으로 다양한 규격의 PCB소자 및 모듈의 고정과, PCB소자에 연결된 브릿지의 컷팅작업이 가능하도록 설계, 프레임제작과 교체에 소요되는 시간과 비용을 줄여 생산원가의 절감형 지그 개발로, 기존 타발식에 비해 정밀도 약 70% 상향 및 시설 투자비 약 400%를 절감하였다.

• Advances in environmental research
• /
• 제6권1호
• /
• pp.67-81
• /
• 2017

Mining activities play a significant role in environmental pollution by producing large amounts of tailings which comprise heavy metals. The impressive increase in mining activities in recent decades, due to their high influence on the industry of developing countries, duplicates the need for a substantial effort to develop and apply efficient measures of pollution control, mitigation, and abatement. In this study, our objective was to investigate the effect of simulation of the leachate, pH and inflow intensity of transport of $Pb^{2+}$, $Zn^{2+}$, and $Cd^{2+}$ through Lakan lead and zinc plant tailings, in Iran, and to evaluate the modeling efficiency by comparing the modeling results and the results obtained from previous column studies. We used the HP1 model and the PHREEQC database to simulate metals transport through a saturated soil column during a 15 day time period. The simulations assumed local equilibrium. As expected, a lower pH and inflow intensity increased metal transport. The retardation of heavy metals followed the order $Zn^{2+}$ > $Pb^{2+}$ > $Cd^{2+}$ and the removal concentrations of Cd, Pb, and Zn at the inflow intensity critical scenario, and Cd and Pb at inflow acidity critical scenario exceeded the allowable EPA and Iranian's 1053 standard thresholds. However, although the simulation results generally agreed well with the results of the column study, improvements are expected by using multi-dimensional models and a kinetic modeling approach for the reactions involved. The results of such investigations will be highly useful for designing preventative strategies to control reactive transport of hazardous metals and minimize their environmental effects.

• 한국정보통신학회논문지
• /
• 제12권2호
• /
• pp.343-351
• /
• 2008

본 논문에서는 기존에 제안되었던 정진폭 부호화된 다중 부호 이진 직교(CACB: Constant Amplitude Coded Multicode Biorthogonal) 변조 방식을 고속화 하는 기술로서 CACB의 구조를 유지하면서 직교 위상 진폭 변조(QAM: Quadrature Amplitude Modulation) 방식을 적용하여 대역폭 효율(BE: Bandwidth Efficiency)을 증가시킴으로써 전송률을 높일 수 있는 방식에 대하여 연구한다. 또한 수신단에서 최단 거리 선택 알고리즘(MDSA: Minimum Distance Selection Algorithm)을 이용한 QAM 연판정(SD: Soft Decision) 복조기를 통한 성능 개선 방법을 제안한다. 마지막으로 실제 구현시 다중 경로 페이딩(MPF: Multipath Fading)에서 강한 시스템을 구성할 수 있도록 하는 결정궤환 등화기(DFE: Decision Feedback Equalizer)의 적용 방안을 제시한다. 제안된 방식은 향후 고속의 전송을 요구하는 무선 개인 영역 네트워크(WPAN: Wireless Personal Area Network)의 물리층(PHY: Physical Layer) 표준으로 사용될 수 있다.

• 새물리
• /
• 제68권12호
• /
• pp.1374-1377
• /
• 2018

우리는 Hong-Ou-Mandel 간섭 실험에서 95% 간섭가시도를 획득했다. 지난 연구에서 56% 가시도를 획득한 것에 비하면 획기적으로 가시도가 개선되었다. 우리는 제1형 자발적 매개 하향 변환 목적으로 제작된 ${\beta}$-Barium Borate 단결정에 405 nm 단일모드 연속 발진 레이저를 주사하여 만들어진 쌍둥이 광자쌍을 표준적인 Hong-Ou-Mandel 간섭광학계를 거치게 한 후 다이오드 기반 단일광자 계수기와 자체적으로 제작한 동시계수기에 의해 간섭신호를 측정했다. 지난 연구와 이번 연구의 가장 큰 차이점은 광자를 집광하는데 단일모드 광섬유를 사용했다는 점이다. 단일모드 광섬유는 중심부 크기가 매우 작기 때문에 광결정에서 발생하는 여러 서로 다른 모드 광자 사이의 우연한 동시계수를 억제시키는 공간 필터역할을 함으로써 가시도가 개선된 것으로 보인다.

• 대한원격탐사학회지
• /
• 제25권4호
• /
• pp.367-374
• /
• 2009

지오포털이나 공간정보기반구축 등이 최근 공간정보 분야에서 주요한 연구 동향으로 부각되고 있다. 이러한 응용 분야는 Web 2.0과 관련된 다양한 웹 컴퓨팅 기법이나 방법론, 포털에서 제공하는 공개 API, 공개 소스 GIS, 국제 GIS 표준사양 등 부분적으로 발전되어 오고 있는 요소 기술들이 복합적으로 연동되는 성과로 구현이 가능하다. 본 연구에서는 구글 맵 API와 공개 소스 미들웨어인 Deegree를 연동하는 시험 연구를 수행하여 지오포털 구축에서의 공개 소스 적용 가능성을 검토해 보고자 한다. 공개 소스 미들웨어에서는 OGC 등의 국제 표준사양을 지원하므로 다양한 웹 출력 및 외부 데이터베이스 서버간의 자료 호환 및 상호운영이 가능하고 특정한 웹 서비스 구축 목적에 맞는 추가적인 기능의 구현이나 계층적 아키텍처 구현이 가능하게 한다.