• Title/Summary/Keyword: multi-standard

Search Result 1,645, Processing Time 0.039 seconds

A V2V Transmission Scheme for Safety Message Dissemination in Platooning (군집주행 차량의 안전 메시지 전달을 위한 V2V 전송 기법)

  • Ahn, Woojin;Hong, Hanseul;Kim, Ronny Yongho
    • Journal of Advanced Navigation Technology
    • /
    • v.23 no.6
    • /
    • pp.548-553
    • /
    • 2019
  • Along with advanced vehicle to vehicle (V2V) communication technologies, platooning is regarded as one of the most promising form of autonomous driving solutions in order to increase road capacity. In this paper, we propose a novel V2V transmission scheme for safety message dissemination in platooning. The proposed scheme enhances the efficiency of channel access and multi-vehicle orthogonal frequency division multiple access (OFDMA) transmission by taking advantage of triggered uplink access technique and null data packet feedback report protocol introduced in the sixth generation WLAN standard, IEEE 802.11ax. The simulation results prove that the proposed scheme outperforms the conventional IEEE 802.11 transmission scheme throughout all measured vehicle density range.

Perfusion-Weighted MRI Parameters for Prediction of Early Progressive Infarction in Middle Cerebral Artery Occlusion

  • Kim, Hoon;Kim, Yerim;Kim, Young Woo;Kim, Seong Rim;Yang, Seung Ho
    • Journal of Korean Neurosurgical Society
    • /
    • v.59 no.4
    • /
    • pp.346-351
    • /
    • 2016
  • Objective : Early progressive infarction (EPI) is frequently observed and related to poor functional outcome in patients with middle cerebral artery (MCA) infarction caused by MCA occlusion. We evaluated the perfusion parameters of magnetic resonance imaging (MRI) as a predictor of EPI. Methods : We retrospectively analyzed patients with acute MCA territory infarction caused by MCA occlusion. EPI was defined as a National Institutes of Health Stroke Scale increment ${\geq}2$ points during 24 hours despite receiving standard treatment. Regional parameter ratios, such as cerebral blood flow and volume (rCBV) ratio (ipsilateral value/contralateral value) on perfusion MRI were analyzed to investigate the association with EPI. Results : Sixty-four patients were enrolled in total. EPI was present in 18 (28%) subjects and all EPI occurred within 3 days after hospitalization. Diabetes mellitus, rCBV ratio and regional time to peak (rTTP) ratio showed statically significant differences in both groups. Multi-variate analysis indicated that history of diabetes mellitus [odds ratio (OR), 6.13; 95% confidence interval (CI), 1.55-24.24] and a low rCBV ratio (rCBV, <0.85; OR, 6.57; 95% CI, 1.4-30.27) was significantly correlated with EPI. Conclusion : The incidence of EPI is considerable in patients with acute MCA territory infarction caused by MCA occlusion. We suggest that rCBV ratio is a useful neuro-imaging parameter to predict EPI.

Power consumption estimation of active RFID system using simulation (시뮬레이션을 이용한 능동형 RFID 시스템의 소비 전력 예측)

  • Lee, Moon-Hyoung;Lee, Hyun-Kyo;Lim, Kyoung-Hee;Lee, Kang-Won
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.20 no.8
    • /
    • pp.1569-1580
    • /
    • 2016
  • For the 2.4 GHz active RFID to be successful in the market, one of the requirements is the increased battery life. However, currently we do not have any accurate power consumption estimation method. In this study we develop a simulation model, which can be used to estimate power consumption of tag accurately. Six different simulation models are proposed depending on collision algorithm and query command method. To improve estimation accuracy, we classify tag operating modes as the wake-up receive, UHF receive, sleep timer, tag response, and sleep modes. Power consumption and operating time are identified according to the tag operating mode. Query command for simplifying collection and ack command procedure and newly developed collision control algorithm are used in the simulation. Other performance measures such as throughput, recognition time for multi-tags, tag recognition rate including power consumption are compared with those from the current standard ISO/IEC 18000-7.

Economic Self-Sufficiency Criteria for New Town Planning by Network Characteristics (도시네트워크 특성에 따른 신도시 경제적 자족성 기준 연구)

  • Song, Young-Il;Rhim, Joo-Ho
    • Land and Housing Review
    • /
    • v.7 no.4
    • /
    • pp.251-259
    • /
    • 2016
  • As the spatial structure of a region is evolving into a decentralized multi-nucli model, networked connection among cities in a region is emerging as an important issue to strengthen regional competitiveness. This paper focused on the limitation of current new town planning criteria which just suggest a uniform standard for economic self-sufficiency by new-town size, without representing the network characteristics of new town. If a new town is planned as a economic strongpoint within a region, it needs to secure appropriate industrial functions. This study classified the characteristics of new towns by network analysis and reviewed the economic self-sufficiency criteria by new town types. Using various network connectedness indices, the 1st and 2nd round new towns in the capital region were analyzed, and land-use distribution of new-towns in other countries were also examined comparatively. The network characteristics of new towns are classified as three types: mono-nucleus, distributed center, and dependent. Based on this classification, planning criteria for self-sufficiency were compared among 6 new towns. This study provides implications for the amendment of "the sustainable new town planning criteria" or the revision of development plans.

Effects of Sputter Deposition Sequence and Sulfurization Process of Cu, Zn, Sn on Properties of Cu2ZnSnS4 Solar Cell Material (Cu, Zn, Sn의 스퍼터링 적층방법과 황화 열처리공정이 Cu2ZnSnS4 태양전지재료 특성에 미치는 효과)

  • Park, Nam-Kyu;Arepalli, Vinaya Kumar;Kim, Eui-Tae
    • Korean Journal of Materials Research
    • /
    • v.23 no.6
    • /
    • pp.304-308
    • /
    • 2013
  • The effect of a sputter deposition sequence of Cu, Zn, and Sn metal layers on the properties of $Cu_2ZnSnS_4$ (CZTS) was systematically studied for solar cell applications. The set of Cu/Sn/Zn/Cu multi metal films was deposited on a Mo/$SiO_2$/Si wafer using dc sputtering. CZTS films were prepared through a sulfurization process of the Cu/Sn/Zn/Cu metal layers at $500^{\circ}C$ in a $H_2S$ gas environment. $H_2S$ (0.1%) gas of 200 standard cubic centimeters per minute was supplied in the cold-wall sulfurization reactor. The metal film prepared by one-cycle deposition of Cu(360 nm)/Sn(400 nm)/Zn(400 nm)/Cu(440 nm) had a relatively rough surface due to a well-developed columnar structure growth. A dense and smooth metal surface was achieved for two- or three-cycle deposition of Cu/Sn/Zn/Cu, in which each metal layer thickness was decreased to 200 nm. Moreover, the three-cycle deposition sample showed the best CZTS kesterite structures after 5 hr sulfurization treatment. The two- and three-cycle Cu/Sn/Zn/Cu samples showed high-efficient photoluminescence (PL) spectra after a 3 hr sulfurization treatment, wheres the one-cycle sample yielded poor PL efficiency. The PL spectra of the three-cycle sample showed a broad peak in the range of 700-1000 nm, peaked at 870 nm (1.425 eV). This result is in good agreement with the reported bandgap energy of CZTS.

A Study on deciding factors of freight tariff for Truck Safety Rates (화물자동차 안전운송 운임제 운임결정 요인 연구)

  • Park, Ji-Hoon;Kim, Hwan-Seong
    • Proceedings of the Korean Institute of Navigation and Port Research Conference
    • /
    • 2019.11a
    • /
    • pp.193-194
    • /
    • 2019
  • Due to structural problems in the transportation market, such as fraudulent competition and multi-level transportation transactions, tariff are not properly refIected to the final trucker even if freight tariff are increased due to diesel price hikes and transportation cost increases. By Launched "standard tariff system" in 2017 based on the trucks, government would tried to guarantee the minimum tariff such that prevents overloading, speeding, and strain for trucker. However, It is necessary to analyze in advance the issue of the system and its impact on container freight. Thus, this study analyzes the issues and countermeasures related to the tariff system that is formed when the "Truck Safety Rates" is introduced, and also analyzes the influence factors of the expenditure cost on the container freight which is applied to the "Truck Safety Rates".

  • PDF

Design and Implementation of Public key-based Video Conference System for Authentication and Encryption (공개키기반 사용자인증과 암호화를 적용한 영상회의 시스템 설계 및 구현)

  • Jung Yong-Deug;Lee Sang-Hun;Jin Moon-Seog
    • The KIPS Transactions:PartC
    • /
    • v.11C no.7 s.96
    • /
    • pp.971-980
    • /
    • 2004
  • This paper describes the design and implementation of the video conferencing system using public key infrastructure which is used for user authentication and encryption. Public key infrastructure reinforces the authentication process for conference participant, and the symmetric key system blocks malicious access to information and protect conference control information. This paper shows the implementation of the trans portation layer secure protocol in conformity with Korea public key authentication algorithm standard and symmetric encryption algorithm (DES, 3DES and AES) for media stream encryption. In this paper, we deal with two ways of protecting information : transportation layer secure protocol secures user authentication process and the conference control information; while public key-based authentication system protects personal information of users when they connect to the network. When distributing the session keys for encryption, Internet Key Exchange is used for P2P communication, and secure protocol is employed for 1 : N multi-user communication in the way of distributing the public key-based en-cryption key.

A Deduction of Key Work for Service Guide of Construction Managerin Construction Project (건설사업관리(CM) 현장 참여자의 업무지침을 위한 핵심업무 도출)

  • Song, Sul-Min;Seo, Jin-Hyun;Lee, Chang-Hee;Kim, Yes-Sang;Cho, Hun-Hee
    • Korean Journal of Construction Engineering and Management
    • /
    • v.12 no.4
    • /
    • pp.11-20
    • /
    • 2011
  • Recently, the Construction Management service of domestic construction environment has being extended because that is an effective means to supplement owner's management and improve a total management of construction. But existing CM service guide is staying simply defined level about a work scope and procedure. So the standard CM guide needs to set a detailed plan of the project. Therefore, the key works were deducted by doing survey after the main work of CM service based on CM case studies and an existing CM service guide. That is expected to use CM contract and do service.

Compression-time Shortening Algorithm on JPEG2000 using Pre-Truncation Method (선자름 방법을 이용한 JPEG2000에서의 부호차 시간 단축 알고리즘)

  • 양낙민;정재호
    • The Journal of Korean Institute of Communications and Information Sciences
    • /
    • v.28 no.1C
    • /
    • pp.64-71
    • /
    • 2003
  • In this paper, we proposed an algorithm that shorten coding time maintaining image quality in JPEG2000, which is the standard, of still image compression. This method encodes only the bit plane selected as appropriate truncation point for output bitstream, obtained from estimation of frequency distribution for whole image. Wavelet characterized by multi-resolution has vertical, horizontal, and diagonal frequency components for each resolution. The frequency interrelation addressed above is maintained thorough whole level of resolution and represents the unique frequency characteristics for input image. Thus, using the frequency relation at highest level, we can pick the truncation point for the compression time decrease by estimating code bits at encoding each code block. Also, we reduced the encoding time using simply down sampling instead of low-pass filtering at low-levels which are not encoded in color component of lower energy than luminance component. From the proposed algorithm, we can reduce about 15~36% of encoding time maintaining PSNR 30$\pm$0.5㏈.

The Efficient 32×32 Inverse Transform Design for High Performance HEVC Decoder (고성능 HEVC 복호기를 위한 효율적인 32×32 역변환기 설계)

  • Han, Geumhee;Ryoo, Kwangki
    • Journal of the Korea Institute of Information and Communication Engineering
    • /
    • v.17 no.4
    • /
    • pp.953-958
    • /
    • 2013
  • In this paper, an efficient hardware architecture is proposed for $32{\times}32$ inverse transform HEVC decoder. HEVC is a new image compression standard to deal with much larger image sizes compared with conventional image codecs, such as 4k, 8k images. To process huge image data effectively, it adopts various new block structures. Theses blocks consists of $4{\times}4$, $8{\times}8$, $16{\times}16$, and $32{\times}32$ block. This paper suggests an effective structures to process $32{\times}32$ inverse transform. This structure of inverse transform adopts the decomposed $16{\times}16$ matrixes of $32{\times}32$ matrix, and simplified the operations by implementing multiplying with shifters and adders. Additionally the operations frequency is downed by using multicycle paths. Also this structure can be easily adopted to a multi-size transform or a forward transform block in HEVC codec.