• 통합자연과학논문집
• /
• 제3권1호
• /
• pp.24-27
• /
• 2010

Multi-functionalized rugate porous silicon (PSi) for biosensor was developed by hydrosilylation with silole and its further reaction with biotin groups. PSi was generated by an electrochemical etching of silicon wafer in aqueous ethanolic HF solution PSi prepared by using etching conditions showed that many sharp spectral lines can be obtained in the optical reflectivity spectrum. 1,1-hydrovinyl-2,3,4,5-tetraphenylsilole was obtained from the reaction of 1,1-dilithio-2,3,4,5-tetraphenyl-1,3-butadiene with dichlorovinylsilane. Multi-functionalized PSi with silole and biotin groups was characterized by UV-vis absorption spectroscopy, Ocean optics 2000 spectrometer, and fluorescence spectroscopy. Optical characteristics such as reflectivity and photoluminescence (PL) were observed. An increase of the reflection wavelength in the reflectivity spectrum by 20 nm was observed, indicative of a change in refractive indices induced by hydrosilylation of the silole and biotin groups to the rugate PSi. This red-shift was attributed to the replacement of some of the Si-H group of fresh rugate PSi with silole and biotin group.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.1519-1522
• /
• 2009

We describe a 32" liquid-crystal display (LCD) with multi-touch sensing capability by integrating IR detector arrays onto the LED backlight plate. A transparent light guide is placed in front of the display screen, with IR LEDs disposed at its edges and emitting IR light into the light guide, the light is trapped by total internal reflection within the light guide to be as touch-sensing light. A physical contact with the acrylic plate surface will stimulate some trapped light to be escaped from the light guide and pass through LCD panel to be detected by the IR detectors. The touch-sensing LCD with this configuration can locate simultaneous multiple touche points on the touchable surface.

• 한국해양공학회:학술대회논문집
• /
• 한국해양공학회 2003년도 춘계학술대회 논문집
• /
• pp.185-191
• /
• 2003

A numerical study on the hydrodynamic properties of a floating flexible breakwater consisting of triple vertical porous membrane structures attached to a floating rigid pontoon restrained by moorings is carried out in the context of two-dimensional linear wave-flexible body interaction theory. The tensions in the triple membranes are achieved by hanging a clump weight from its lower ends. The clump weight is also restrained properly by moorings. The dynamic behavior of the breakwater was described through an appropriate Green function, and the fluid multi-domains are incorporated into the boundary integral equation. Numerical results are presented which illustrate the effects of the various wave and structural parameters on the efficiency of the breakwater as a barrier to wave action. It is found that the wave reflection and transmission properties of the structures depends strongly on the membrane length taking major fraction of water column, the magnitude of tensions on membrane achieving by the clump weight, proper mooring types and stiffness, the permeability on the membrane dissipating wave energy.

• International Journal of Ocean System Engineering
• /
• 제3권3호
• /
• pp.158-163
• /
• 2013

The acoustic target strength (TS) is one of the most important parameters for a submarine's stealth design. Because modem submarines are larger than their predecessors, TS must be managed at each design stage in order to reduce it. To predict the TS of a submarine, TASTRAN R1 was developed based on a Kirchhoff approximation in a high-frequency range. This program can present TS values that include multi-bounce effect in the exterior and interior of the structure by combining geometric optics (GO) and physical optics (PO) methods, anechoic coating effect by using the reflection coefficient, and response time pattern for a detected target. In this paper, TS calculations for a submarine model with the above effects are simulated by using this developed program, and the TS results are discussed.

• 한국항만학회지
• /
• 제8권2호
• /
• pp.57-65
• /
• 1994

A theoretical formulation is performed to investigate the wave reflection and transmission ratios by a submerged multi-layered rubble-mound breakwater. This theory, which is based on the linear boundary integral method, can be extended to the multi-layered breakwater with arbitrary cross section. In the theoretical analysis evanescent mode wave is not considered, since fictitious open boundaries are put on the places far from the structure. Therefore the mathematical presentation may be simpler, and computational time shorter. The validity of obtained numerical results is demonstrated by comparing with ones of impermeable and permeable breakwaters. Comparison shows resonable agreement. On the basis of these verifications this theory is applied to the one and two-layered submerged rubble-mound breakwater with trapezoidal type.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2007년도 추계학술대회논문집
• /
• pp.148-152
• /
• 2007

In recent days, on account of the cultural development and the improvement of citizen's consciousness level, it is the real situation that the construction of small-scaled Multi-Purpose Hall where various cultural events could be performed, is on increasing. However, since the most of Multi-Purpose Hall had been designed and built up without any consideration on Acoustic Factor, many problems are on occurring thereat. Since those small-scaled Multi-Purpose Hall have been mostly used with the finishing material which contains a high degree of Acoustic Absorption indiscreetly, both diffusion and reflection of sound are not establishing properly, and because thereverberation of sound is very low, in case of musical performance by musical instrument, its sound hears too arid and stiff, there occurs some acoustic defect such as it becomes difficult for music appreciation with sufficient timbre, so that the capability improvement on the matter is urgently requiring situation. Therefore, this Study has tried to seize the satisfaction level about the small-scaled Multi-Purpose Hall after betterment of the acoustic performance by appraise the acoustic condition of the Hall, using Auralization Technique that can experience Virtual Acoustic Field regarding to the small-scaled Multi-Purpose Hall as its object. It is deemed that such research result could be practically used as the useful material which enables to bring a reduction effect of construction cost as well asenhancement of the acoustic performance through its presupposition?control on the acoustic problem when construction or renovation of other similar small-scaled Multi-Purpose Hall in the future.

• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.41-47
• /
• 2012

본 논문에서는 초음파 송신 시간을 일정 패턴으로 계획하여 송신하고 연속해서 수신되는 거리 데이터 값을 이전상태의 데이터를 통해 예측된 거리값으로 매핑 시키는 알고리즘을 제시하였다. 에러값에 대한 패턴을 인식하여 다중반사에 의한 에러를 판별 및 제거할 수 있다. 그리고 이동 로봇을 이용하여 다중반사 환경에서 실험을 통하여 거리값의 손실 없이 정확한 데이터를 획득할 수 있음을 실험을 통하여 보였다. 이동로봇에 다양한 센서기술들을 이용하여 실내에서 활용하기 적합한 지능적 역할을 수행할 수 있는 다목적용 자율 이동 로봇에 환경인식을 위한 다중 초음파센서를 장착하여 초음파 반사에 따른 크로스토크 실험결과를 제하였다. 또한, 기존 로봇에 장착된 초음파를 이용하여 계획송신(Scheduling firing)방법을 적용하여 임의의 환경에서의 실험결과를 통해 제시한 방법에 대한 유효성을 검증하였다.

• 수산해양기술연구
• /
• 제22권1호
• /
• pp.41-48
• /
• 1986

Ifis recommended that the injection rate should be accurate and reliable in the input data of the performance simulation in diesel engine. Matsuoka Sin improved W. Bosch's injection ratio measurement system. Matsuoka Sin reduced length of the test pipe and set the orifice. However, it was not measured accurately to measure the injection ratio due to reflection wave. In the present thesis, the improved measurement system with combination of the conventional W. Bosch type injection ratio measurement system and Matsuoka Sin type corrected W. Bosch type was practically made. The location of orifice and throttle valve was modified and set one more back pressure valve in order to reduce the effect of reflection wave. The results according to injection condition of multi-hole nozzle are following: 1. Measurement error of injection ratio measurement system in this thesis was $\pm$ 1 %, therefore, its reliability was good. 2. The form of injetion ratio is changed from trapezoidal shape to triangle shape with increase of revolution per minute when injection amount is constant. 3. In the case of constant rpm, the initial injection ratio is almost constant regardless of the amount, meanwhile the injection period becomes longer with increase of the amount. 4. The injection pressure of nozzle isn't largely influenced with injection ratio in the case of constant injection amount and rpm, otherwise the initial injection amount is increased by 3-4% when the injection pressure is low. 5. The injection ratio isn't nearly influenced with back pressure.

• 한국통신학회논문지
• /
• 제42권4호
• /
• pp.798-805
• /
• 2017

본 논문은 슬롯이 삽입된 접지, 수정된 급전선 및 서로 다른 반지름을 갖는 원형 링 구조의 패치 안테나를 제시한다. 안테나의 크기는 $15{\times}12mm^2$이며, 전체 면적 $180mm^2$ 및 전기적 치수 $0.14{\lambda}{\times}0.12{\lambda}$(초단 주파수)를 갖는다. 제안된 안테나는 3.1 GHz ~ 12.3 GHz 대역을 포함하며, 대역폭 비 4.13:1, 비 대역폭 122%, 반사계수 최대 -38dB의 결과를 보인다. 소형화된 크기를 증명하기 위해 대역폭 크기 비율이 계산되었다. 공급 라인에 삽입 된 얇은 슬롯은 전체 주파수 대역에서 우수한 임피던스 정합을 제공한다. 제안된 안테나의 시뮬레이션은 반사 계수 ${\leq}-10dB$, VSWR 2:1, 방사 패턴 및 군지연 (ns)을 시뮬레이션 결과로 제시하였다. 제안된 안테나는 우수한 임피던스 정합 및 매우 작은 크기의 장점을 보이며, 대역폭 향상 및 UWB 단거리 고속 무선통신을 제공한다.

• 한국전자통신학회논문지
• /
• 제16권5호
• /
• pp.789-798
• /
• 2021

본 연구는 레이다 시스템의 성능 검증 및 개선을 위한 표적 신호 모의장비의 표적별 레이다반사면적(RCS) 데이터의 수집 및 분석을 목적으로 민항기(B-747, B-737) 및 전투기(F-16) 기종에 대한 VHF 대역의 모노스태틱/바이스태틱 RCS를 전자기장 분석한 연구이다. 분석에 앞서, 전자기장 분석 도구들에 대한 데이터 교차 검증 및 분석 시간 비교를 통해 소요 시간을 최소화하였으며, 분석 해상도에 따른 보간 오차를 검토하여 분석범위를 선정하였다. 각 기종별로 획득된 RCS 데이터는 입/반사 고각 및 주파수별로 나누어 분석하였으며, 기체 모양 및 입/반사 각도에 따른 RCS 특징을 기술하였다. 마지막으로 RCS 분포 히스토그램을 통해 각 기종별 통계적 RCS 분포값을 제시한다. 향후 본 연구를 통해 획득한 RCS 데이터베이스는 VHF 대역 레이다 시스템의 항적 신호 모의를 위한 신호모사장치에 활용할 예정이다.