• Advances in Computational Design
• /
• 제8권3호
• /
• pp.191-217
• /
• 2023

The objective of this study was to evaluate the foundation structure of a 3.6-MW wind turbine generator (WTG) installed offshore in Western Korea. The ultimate limit state (ULS) and fatigue limit state (FLS) of the multi-pile steel foundation (MSF) installed at the Saemangeum offshore wind farm were structurally investigated using the finite element (FE) software, ANSYS Workbench 19.0. According to the ULS analysis, no plastic deformation was found in any of the components constituting the substructure. At the same time, the maximal stress value reached the calculation limit of 335 MPa. According to the FLS results, the stress concentration factor (SCF) ranged from 1.00 to 1.88 in all components. The results of this study can be applied to determine the optimal design for MSFs.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 1994년도 봄 학술발표회 논문집
• /
• pp.43-58
• /
• 1994

In this reaserch, the comparison between numerical results and field measurments including settlement, heaving and lateral displacement, in the interchange construction works on soft ground. Sand drain was performed for the improvement of the site and steel pipe piles driven for the pier foundation of interchange. The steel pipe piles were replaced to the equivalent steel sheet pile wall. Biot's equation was coupled with elasto-viscoplastic model for the multi-purpose program of soft foundation. Finally countemeasures for future possible lateral displacement and settlement were exmanined.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.385-392
• /
• 2008

Modern city have had a lot of high-rise building in high standards and multi-level performance. Using of city space reach better stages by using integration. These skyscraper have increased working load on ground. that building is efficiently designed for that soil capacity is well applied. With material side, big size pile, high strength concrete and high strength steel is used for that getting enough lobby space and resisting load increased of high-rise building. limit load test and load transmitted test can make soil capacity optimized. By the way, method of measuring pile capacity is more advanced and bigger. pile type applied by high rise building have underground excavation space, also reflect regional soil property and have some fact reviewed. A lot of high rise building recently is built as land mark in Seoul, Busan and Incheon. about method of measuring capacity of foundation pile, example of construction field is compared and reviewed.

• Steel and Composite Structures
• /
• 제49권1호
• /
• pp.81-89
• /
• 2023

A simplified calculation method of natural vibration characteristics of high-speed railway multi-span bridge-longitudinal ballastless track system is proposed. The rail, track slab, base slab, main beam, bearing, pier, cap and pile foundation are taken into account, and the multi-span longitudinal ballastless track-beam-bearing-pier-cap-pile foundation integrated model (MBTIM) is established. The energy equation of each component of the MBTIM based on Timoshenko beam theory is constructed. Using the improved Fourier series, and the Rayleigh-Ritz method and Hamilton principle are combined to obtain the extremum of the total energy function. The simplified calculation formula of the natural vibration frequency of the MBTIM under the influence of vertical and longitudinal vibration is derived and verified by numerical methods. The influence law of the natural vibration frequency of the MBTIM is analyzed considering and not considering the participation of each component of the MBTIM, the damage of the track interlayer component and the stiffness change of each layer component. The results show that the error between the calculation results of the formula and the numerical method in this paper is less than 3%, which verifies the correctness of the method in this paper. The high-order frequency of the MBTIM is significantly affected considering the track, bridge pier, pile soil and pile cap, while considering the influence of pile cap on the low-order and high-order frequency of the MBTIM is large. The influence of component damage such as void beneath slab, mortar debonding and fastener failure on each order frequency of the MBTIM is basically the same, and the influence of component damage less than 10m on the first fourteen order frequency of the MBTIM is small. The bending stiffness of track slab and rail has no obvious influence on the natural frequency of the MBTIM, and the bending stiffness of main beam has influence on the natural frequency of the MBTIM. The bending stiffness of pier and base slab only has obvious influence on the high-order frequency of the MBTIM. The natural vibration characteristics of the MBTIM play an important guiding role in the safety analysis of high-speed train running, the damage detection of track-bridge structure and the seismic design of railway bridge.

• 한국지반공학회논문집
• /
• 제16권4호
• /
• pp.141-148
• /
• 2000

방글라데시의 자무나 강을 가로지르는 길이 4.8km 교량의 교각기초에 대구경 개단 강관말뚝 2본 또는 3본이 사용되었다. 총 50개의 교각과 시험용 말뚝 2본을 포함한 123본의 말뚝이 강 하저에서 정규압밀된 모래층을 지나 자갈층 위까지 항타하여 설치되었다. 두께 40mm 내지 60mm의 변단면을 갖는 직경 3.15m와 2.50m의 짧은 말뚝 2, 3개를 연결하여 69m에서 74m 깊이까지 6:1의 경사로 항타하여 시공하였다. 전체 123본의 말뚝에 대하여 항타후 관내토 길이를 측정하였고, 이중 24본의 말뚝들에 대해서는 항타시 동재하시험을 수행하였다. 말뚝 항타완료후 측정한 결과에 의하면, 선단부 근처에서는 주동 관내토(Active Plug)가 주면마찰력 발현에 크게 기여한 것으로 나타났다. 시험한 모든 말뚝들은 약 90% 정도의 지지력이 주면마찰력에 기인하는 주면마찰지지형 말뚝으로 나타났다. 현장모래지반에서의 탄성변형량(Quake)값과 감쇠계수(Smith Damping)값은 직경에 상관없이 일정하게 나타났는데, 이는 주변 지반의 균질함이 잘 반영된 것으로 판단되었다.

• 한국강구조학회 논문집
• /
• 제25권3호
• /
• pp.307-320
• /
• 2013

기존 해상풍력발전 지지구조물의 단점을 보완한 신형식의 파일 기초 하이브리드 지지구조물을 본 연구에서 제안하였다. 이 지지구조는 콘크리트 자중을 이용한 중력식 기초의 개념으로부터 수정되어 4개의 파일로 지지되며, 강재 샤프트와 원추형 콘크리트가 결합된 하이브리드 형식이다. 규모가 크고 두꺼운 콘크리트의 3차원 해석을 위해, 정확한 기하형상 모델링과 응력의 절점 보간이 가능한 솔리드-쉘 입체요소를 개발하였다. 해양구조물 전용 유한요소 프로그램인 XSEA에 탑재된 솔리드-쉘 요소와 Stream Function 파랑 이론을 적용하여, 제안한 하이브리드 지지구조물에 대해 서남해안 지역의 환경조건을 적용한 준정적 해석 및 고유진동수 해석을 실시하였다. 해석결과, 수평변위가 허용변위 이내로 나타났고, 고유진동수 해석을 통해 하이브리드 구조형식의 동적거동에 대한 우수성을 입증하였다. 결과적으로, 파일지지 하이브리드 지지구조물은 우리나라 서남해안 지역과 같이 연약지반에 적용 할 수 있는 충분한 안정성을 가진 것으로 평가 되었고, 각 부재에 대한 최적화 연구를 통해 경제성 확보가 가능한 것으로 검토되었다.