• Journal of Power Electronics
• /
• 제13권2호
• /
• pp.296-303
• /
• 2013

This paper proposes a high efficiency three-phase cascaded phase shifted H-bridge multi-level inverter without DC/DC converters for grid-tied multi string photovoltaic (PV) applications. The cascaded H-bridge topology is suitable for PV applications since each PV module can act as a separate DC source for each cascaded H-bridge module. The proposed phase shifted H-bridge multi-level topology offers advantages such as operation at a lower switching frequency and a lower current ripple when compared to conventional two level topologies. It is also shown that low ripple sinusoidal current waveforms are generated with a unity power factor. The control algorithm permits the independent control of each DC link voltage with a maximum power point for each string of PV modules. The use of the controller area network (CAN) communication protocol for H-bridge multi-level inverters, along with localized PWM generation and PV voltage regulation are implemented. It is also shown that the expansion and modularization capabilities of the H-bridge modules are improved since the individual inverter modules operate more independently. The proposed topology is implemented for a three phase 240kW multi-level PV power conditioning system (PCS) which has 40kW H-bridge modules. The experimental results show that the proposed topology has good performance.

• 전기전자학회논문지
• /
• 제20권3호
• /
• pp.314-317
• /
• 2016

최근 휴대용 기기의 수요가 증가함에 따라 배터리 사용시간을 최대화하기 위한 노력이 진행되고 있다. 본 논문에서는 빠른 과도 응답을 갖는 멀티페이스 벅 변환기를 제안한다. 멀티페이스 벅 변환기는 리플 상쇄 효과가 있기 때문에 작은 크기의 출력 캐패시터를 사용할 수 있고, 더 적은 인덕턴스를 갖는 인덕터의 사용이 가능하다. 휴대용 기기가 대기 모드에서 활성 모드로 빠르게 변할 수 있도록 4-페이스 구조로 설계하여 빠른 과도 응답을 갖게 하였다. 사용된 공정은 Hynix 0.18um CMOS 공정을 통해 제작되었고 공급전압 범위는 2.7~3.3V 이며, 최대 부하 전류는 500mA, settling time은 14us이다.

• 한국해양공학회지
• /
• 제35권2호
• /
• pp.121-130
• /
• 2021

In this study, a computational fluid dynamics (CFD) simulation based on an Eulerian-Eulerian approach was used to evaluate the mixing performance of a mud agitator through the distribution of bulk particles. Firstly, the commercial CFD software Star-CCM+ was verified by performing numerical simulations of single-phase water mixing problems in an agitator with various turbulence models, and the simulation results were compared with an experiment. The standard model was selected as an appropriate turbulence model, and a grid convergence test was performed. Then, a simulation of the liquid-solid multi-phase mixing in an agitator was simulated with different multi-phase interaction models, and lift and drag models were selected. In the case of the lift model, the results were not significantly affected, but Syamlal and O'Brien's drag model showed more reasonable results with respect to the experiment. Finally, with the properly determined simulation conditions, a multi-phase flow simulation of a mud agitator was performed to predict the mixing time and spatial distribution of solid particles. The applicability of the CFD multi-phase simulation for the practical design of a mud agitator was confirmed.

• 한국지하수토양환경학회:학술대회논문집
• /
• 한국지하수토양환경학회 1998년도 공동 심포지엄 및 추계학술발표회
• /
• pp.27-31
• /
• 1998

Most models for the simulation of multi-phase flow and multi-species transport employ the capillary approach which uses the Darcy's law for the representation of mass flux of each phase. The capillary approach based on the Darcy's law require many empirical coefficients with complex functional dependencies rather than rigrous mathematical and physical formulation. The shortcoming of the capillary approach cause the numerical errors in the simulations by the multi-phase flow and transport models. This study discuss some of the problems related with the use of models.

• 한국군사과학기술학회지
• /
• 제21권5호
• /
• pp.684-696
• /
• 2018

The mission in missile systems can be conducted with multiple phases according to the characteristics of the systems and the targets. The safeguarded multi-phase mission includes a safeguarded phase before launch for considering the safety of operators in unexpected squib activation. However, the safeguard function should be disabled after launch to complete the mission. Therefore, the squib system needs to be selectively activated according to the phases. This paper presents a selective squib activation and check circuit design for safeguarded multi-phase missions in missile systems. The presented circuit design was implemented with various electronic components including a field-programmable gate array(FPGA). Its functions and performance were validated by both many ground tests and several flight tests.

• 전기학회논문지
• /
• 제65권11호
• /
• pp.1925-1930
• /
• 2016

Fuel cell power generation system, unlike conventional energy sources, converts chemical energy into electrical energy through electrochemical reaction of hydrogen and oxygen. This paper presents the control of interleaved multi-phase boost converter as the feasibility study on small-scale prototype electric railway vehicle application using fuel cell generation system. PSIM simulation program is to be used to implement the modeling of the electrical fuelcell as well as traction motor control with interleaved multi-phase boost converter. Comparing the input current ripple rate, two-phase interleaved boost converter is less than the boost converter. But the more multi-phase not less proportional to the ripple factor. we confirmed that the amplitude of the input current ripple rate of converter depend on duty ratio.

• 한국마린엔지니어링학회:학술대회논문집
• /
• 한국마린엔지니어링학회 2005년도 전기학술대회논문집
• /
• pp.1170-1175
• /
• 2005

This paper is analyzed the characteristic of multi-phase inverter for the electric propulsion system. Two BLDC motors with 3 and 7 phases are designed with these features in order to simulate the effect of increasing the number of phases. From the simulation results, the 7-phase given better performance in terms of torque pulsation. Also, the torque pulsation can be reduced further by increasing the number of phases.

• 천문학회보
• /
• 제36권2호
• /
• pp.127.1-127.1
• /
• 2011

Over the past several years the millimeter wave VLBI(Veryl Long Baseline Interferometry) observations have been intensively carried out. However In millimeter and sub-millimeter waves observations for VLBI, it is crucial to calibrate correctly the phase variations of the electromagnetic waves propagation through the troposphere. To do this, KVN(Korean VLBI Network) has a unique multi-frequency bands receiver system which is able to perform the simultaneous observations in up to four bands such as 22, 43, 86, and 129GHz. The phase of a source at 22GHz can be used to calibrate the phase of the same source at higher frequency bands. The phase calibration using multi-frequency bands receiver system is possible because the phase fluctuations from a given amount of waver vapor increase linearly with frequency. That is to say that troposphere is non-dispersive property in terms of tropospheric delay fluctuations. In this talk, We present results of test observation for multi-frequency bands receiver system.

• 한국정보통신학회논문지
• /
• 제16권1호
• /
• pp.20-25
• /
• 2012

천리안 위성은 해양 관측과 기상영상 전송, 그리고 Ka 대역 위성통신 신호 중계를 위한 다목적 복합위성으로 2010년 발사되어 운용되고 있다. Ka 대역 위성통신 중계기는 MSM 스위치 기능으로 다중 빔 지향이 가능하고 다중모드 고속 데이터를 전송할 수 있다. 천리안 위성통신 중계기는 MSM 기능으로 다수의 신호발생기와 Ka 대역의 주파수 사용으로 시스템 위상잡음이 증가할 수 있다. 위상잡음은 다중모드 및 고속 데이터 전송에 영향을 미치고 있으며, 높은 위상잡음을 갖는 위성 전송시스템은 전송 신호를 복원하기가 어렵다. 본 논문에서는 천리안 위성통신중계기의 위상잡음을 측정하고, 측정된 위상잡음을 수신 잡음대역폭 관점에서 위상잡음 영향을 분석하고 평가한다. 아울러, 천리안 위성통신 중계기 위상잡음에 대한 다중모드 및 고속 전송 데이터의 전송 성능을 평가한다.

• 한국정보통신학회논문지
• /
• 제13권10호
• /
• pp.2039-2044
• /
• 2009

본 논문에서는 다층형 결합 선로를 이용한 PSK 반송파 신호 복원 회로를 해석하고 설계 제작한다. 다층형 결합 선로 구조의 coupled line으로 구성되는 반송파 복원 6단자 소자는 다층형 구조를 가지며, 수신 전처리부의 6 단자 위상 상관기 구조와 동일한 구조를 갖는 일원화된 수신 구조 구현이 가능하다. 아울러 다층 결합 선로 6 단자 위상 상관기를 이용한 RML 기반 다중 모드 동기 복조형 반송파 신호 복원이 가능한 다층형 결합 선로 반송파 복원 회로 구조를 제안한다. 설계 제작된 다층형 결합 선로 구조 반송파 복원회로에 의한 직교 위상편이 방식 신호의 반송파 신호는 일정한 위상값과 반사 소자에 의해 발생되는 ${\pm}3o$ 이내인 위상차를 갖는 양호한 PSK 반송파 신호 특성을 나타내었다.