• 제목/요약/키워드: multi-mode interference

검색결과 54건 처리시간 0.019초

단일모드 광섬유 집광기를 이용한 Hong-Ou-Mandel 간섭 가시도 향상 (Improvement of Hong-Ou-Mandel Interference Visibility by Using a Single-Mode Optical-Fiber Photon Collector)

  • 한성욱;김헌오;서주연;김명훈
    • 새물리
    • /
    • 제68권12호
    • /
    • pp.1374-1377
    • /
    • 2018
  • 우리는 Hong-Ou-Mandel 간섭 실험에서 95% 간섭가시도를 획득했다. 지난 연구에서 56% 가시도를 획득한 것에 비하면 획기적으로 가시도가 개선되었다. 우리는 제1형 자발적 매개 하향 변환 목적으로 제작된 ${\beta}$-Barium Borate 단결정에 405 nm 단일모드 연속 발진 레이저를 주사하여 만들어진 쌍둥이 광자쌍을 표준적인 Hong-Ou-Mandel 간섭광학계를 거치게 한 후 다이오드 기반 단일광자 계수기와 자체적으로 제작한 동시계수기에 의해 간섭신호를 측정했다. 지난 연구와 이번 연구의 가장 큰 차이점은 광자를 집광하는데 단일모드 광섬유를 사용했다는 점이다. 단일모드 광섬유는 중심부 크기가 매우 작기 때문에 광결정에서 발생하는 여러 서로 다른 모드 광자 사이의 우연한 동시계수를 억제시키는 공간 필터역할을 함으로써 가시도가 개선된 것으로 보인다.

멀티셀 기반의 다중 사용자 OFDM-TDD 시스템에서 효과적인 프레임 크기 결정과 자원 할당 기법 (An Efficient frame size Decision and Resource Allocation Method for Multiuser OFDM/TDD System in Multicell Environment)

  • 금승원;김정곤;신길호;김형명
    • 한국통신학회논문지
    • /
    • 제31권8A호
    • /
    • pp.760-768
    • /
    • 2006
  • 단일 사용자 OFDM/TDD 시스템에서 스펙트럼 효율을 최대화하는 부 대역과 자원 할당 주기결정 방식이 이미 제안되어 있다. 그러나 그 기법은 단일 사용자에 대한 것이며, 다중 셀 다중 사용자인 경우에는 사용자마다 부 대역으로 나누는 대역의 크기가 다르고 자원 할당 주기가 다르게 될 수 있다. 또한 다중 셀 환경에서 자원 할당을 할 경우에는 다른 셀에서 오는 간섭을 예측하기 힘들기 때문에 목표 BER을 만족시키면서 자원 할당을 하기 힘들게 되는 문제점이 있을 수 있다. 이런 다중 셀 환경에서도 목표 BER을 만족시키기 위해서, 효과적으로 자원 할당을 하는 기법을 제안하고, 이를 분석하였으며, 시뮬레이션을 통해 검증, 평가하였다. 본 논문의 결과는, 향후 OFDM 기반의 차세대 셀룰러 이동통신시스템의 성능 예측 및 자원할당기술 적용 시에 활용될 것으로 생각된다.

광 테이퍼 결합기에 기초한 새로운 바이오-센서 플랫폼의 구현 (Implementation of Novel Bio-sensor Platform based on Optical Taper Coupler)

  • 호광춘
    • 한국인터넷방송통신학회논문지
    • /
    • 제23권5호
    • /
    • pp.145-150
    • /
    • 2023
  • 불균일 형태의 광 테이퍼 도파관은 단일 모드 광섬유나 광결정 도파관과 집적되어 고효율 모드 커플링을 위한 소자로 널리 사용되어 왔다. 본 논문에서는 이와 같은 특성을 나타내는 광 테이퍼 도파관을 사용하여 화학적 감지 및 바이오 감지를 위한 새로운 플랫폼을 제시하였다. 작동 원리는 광 방향성 결합기 (DC)와 다중 모드 간섭 결합기 (MMIC)의 결합효율과 간섭특성에 기반한다. 먼저, DC와 MMIC의 테이퍼 섹션에 대한 곡률 특성을 설명하고, 도파관 감도를 증가시키기 위한 최적화된 테이퍼 도파관의 설계 사양을 선택하였다. 다음으로, 감지 분석물의 굴절률 변화에 대한 센서 응답을 수치해석 하였다. 수치해석 결과, 결합기의 길이가 증가함에 따라 분석 물질의 굴절률 단위 (RIU) 변화 당 유효지수가 증가하였으며, 그 감도는 테이퍼 DC 및 MMIC 설계 기법을 사용하여 조정할 수 있음을 보여주었다.

Widely Tunable Coupled-ring Reflector Laser Diode Consisting of Square Ring Resonators

  • Kim, Su-Hyun;Byun, Young-Tae;Kim, Doo-Gun;Dagli, Nadir;Chung, Young-Chul
    • Journal of the Optical Society of Korea
    • /
    • 제14권1호
    • /
    • pp.38-41
    • /
    • 2010
  • We design and fabricate a widely tunable laser diode made of InGaAsP-InP. The diode is monolithically integrated with a wavelength-selective coupled-ring reflector and semiconductor amplifiers. For realization of a compact size device, deeply etched multi-mode interference couplers and square ring resonators composed of total-internal-reflection mirrors are adopted and fabricated using a self-aligned process. It is demonstrated that the laser diode exhibits single mode operation and 16 nm tuning range with side-mode-suppression-ratio exceeding 20 dB.

WPAN에서 간섭을 피하기 위한 멀티모드 단말기 채널등급 방법 (Channel Grade Method of multi-mode mobile device for avoiding Interference at WPAN)

  • 정성원;금동현;최승원
    • 디지털산업정보학회논문지
    • /
    • 제11권3호
    • /
    • pp.91-98
    • /
    • 2015
  • There is a new evolution in technological advancement taking place called the Internet of Things (IoT), The IoT enables physical world objects in our surrounding to be connected to the Internet. ISM (Industrial Scientific Medical) band that is 2.4GHz band authorized free of charge is being widely used for smart devices. Accordingly studies have been continuously conducted on the possibility of coexistence among nodes using ISM band. In particular, the interference of IEEE 802.11b based Wi-Fi devices using overlapping channel during communication among IEEE 802.15.4 based wireless sensor nodes suitable for low-power, low-speed communication using ISM band. Because serious network performance deterioration of wireless sensor networks. In this paper, we will propose an algorithm that identifies the possibility of using more accurate channels by mixing utilization of interference signal and RSSI (Received Signal Strength Indicator) Min/Max/Activity of Interference signal by wireless sensor nodes. In addition, it will verify our algorithm by using OPNET Network verification simulator.

MB-OFDM UWB 신호 간섭하에서 SFBC/SFTC-OFDM 시스템들의 성능 비교 (Performance Comparison of SFBC/SFTC-OFDM Systems Under MB-OFDM Interference)

  • 김경석;송창근
    • 한국통신학회논문지
    • /
    • 제31권10A호
    • /
    • pp.968-975
    • /
    • 2006
  • 고속 데이터 전송을 위하여, 송수신단에 다중 안테나를 사용함으로써 독립적인 페이딩 채널을 다수개 형성하여 다이버시티 이득과 코딩 이득을 동시에 얻는 MIMO(Multiple-Input Multiple-Output) 방식에 대한 연구가 활발히 진행되고 있다. 하지만 아직 UWB(Ultra Wide Band) 시스템과의 간섭에 대한 분석은 이루어지고 있지 않다. 이에 본 논문에서는 공간 다이버시티 특성을 가진 블록 코드를 OFDM 시스템에 적용하여, MIMO-OFDM 수신기에 인접한 UWB 기기로부터 SFBC(Space Frequency Block Code)-OFDM 시스템과 SFTC(Space Frequency Trellis Code)-OFDM 시스템에 .미치는 간섭 영향을 MIMO 채널 환경에서 성능을 분석하였다. 시뮬레이션 결과 SFTC-OFDM 시스템이 MB(Multi Band)-OFDM UWB 간섭에 대해 SFBC-OFDM 시스템보다 더 강인한 성능을 보여주었다.

다중모드간섭을 이용한 1x4 광 분배기의 도파폭에 따른 균일도 특성 (The characteristics of Uniformity according to the width of the 1x4 Power Splitter based on Multi-mode Interference)

  • 홍정무;박순룡;이승걸;이일항;오범환
    • 한국광학회:학술대회논문집
    • /
    • 한국광학회 2001년도 제12회 정기총회 및 01년도 동계학술발표회
    • /
    • pp.30-31
    • /
    • 2001
  • 다중모드간섭을 이용한 소자는 집적광학에서 광신호의 분리와 결합에 있어서 널리 사용되고 있다. 이러한 소자는 편광상태와 파장에 덜 민감하며, 광 대역폭과 제작 허용오차가 크다는 장점을 가진다. 이러한 다중모드간섭기의 설계에 있어서 간섭기의 폭은 주로 출력단에서의 도파로 폭과 도파로간 간격으로부터 정해져왔다. 본 연구에서는 특별히 광신호의 효율적인 분배를 위해 간섭기의 폭과 관련하여 광 분배기의 손실 및 균일도를 최적화하기 위한 방안을 강구하였으며, 근사적인 이론식에 의한 결과와 비교하였다. (중략)

  • PDF

두 셀 시스템 환경에서 하이브리드 모드 빔형성 성능에 대한 연구 (On The Performance of a Hybrid Mode Beamforming in A Two-Cell System)

  • 양장훈;채혁진;김동구
    • 한국통신학회논문지
    • /
    • 제37A권12호
    • /
    • pp.1133-1139
    • /
    • 2012
  • 본 논문에서는 연계 빔형성과 비연계 빔형성 방법이 동시에 가능한 하이브리드 모드 빔형성 (HMB) 방법을 제안한다. HMB는 점근적으로 합 전송 증가율에 있어서 최적의 빔형성 방법임을 증명한다. 다양한 모의 실험을 통해서 HMB는 대칭 간섭 채널 환경에서 연계 빔형성 방법과 거의 동일한 성능을 달성함을 보인다. 또한, 보다 현실적인 비대칭적 간섭 채널 환경에서는 비대칭 채널 환경에서 연계 빔형성의 전력 비효율성으로 인한 성능의 저하를 갖지만, 연계 빔형성 방법보다는 우수한 성능을 갖는다는 것을 보인다.

The Generator Excitation Control Based on the Quasi-sliding Mode Pseudo-variable Structure Control

  • Hu, Jian;Fu, Lijun
    • Journal of Electrical Engineering and Technology
    • /
    • 제13권4호
    • /
    • pp.1474-1482
    • /
    • 2018
  • As an essential means of generator voltage regulation, excitation control plays an important role in controlling the stability of the power system. Therefore, the reasonable design of an excitation controller can help improve the system stability. In order to raise the robustness of the generator exciting system under outside interference and parametric perturbation and eliminate chattering in the sliding mode control, this paper presents a generator excitation control based on the quasi-sliding mode pseudo-variable structure control. A mathematical model of the synchronous generator is established by selecting its power, speed and voltage deviation as state variables. Then, according to the existing conditions of the quasi-sliding mode, a quasi-sliding mode pseudo-variable structure controller is designed, and the parameters of the controller are obtained with the method of pole configuration. Simulations show that compared with the existing methods, the proposed method is not only useful for accurate voltage regulation, but also beneficial to improving the robustness of the system at a time when perturbance happens in the system.

MUD 기법을 적용한 TD/CDMA 시스템에서의 채널 추정 기법 (Channel estimation of TD/CDMA system using Multi-User detector)

  • 고균병;조영보;권동승;정인철;강창언;홍대식
    • 대한전자공학회:학술대회논문집
    • /
    • 대한전자공학회 2001년도 하계종합학술대회 논문집(1)
    • /
    • pp.17-20
    • /
    • 2001
  • This paper studies the channel estimation schemes of Time Division Duplex (TDD) Code Division Multiple Access (CDMA) system with a parallel interference cancellation (PIC) scheme in the multi-Path fading channel. Also, the effective interpolation scheme which maintains the merits of WCDMA TDD mode is proposed. By Monte Carlo simulations, it is shown that the proposed interpolation method can be used in order to obtain the proper performance of a multi-stage PIC and in order to reduce the required Eb/No in the second stage at a BER= 10$^{-2}$

  • PDF