• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 2003년도 춘계공동학술대회
• /
• pp.729-733
• /
• 2003

The presence of local features within clusters incurred by multi-modal nature of data prohibits many conventional clustering techniques from working properly. Especially, the clustering of datasets with non-Gaussian distributions within a cluster can be problematic when the technique with implicit assumption of Gaussian distribution is used. Current study proposes a simple tandem clustering method composed of k-means type algorithm and hierarchical method to solve such problems. The multi-modal dataset is first divided into many small pre-clusters by k-means or fuzzy k-means algorithm. The pre-clusters found from the first step are to be clustered again using agglomerative hierarchical clustering method with Kullback- Leibler divergence as the measure of dissimilarity. This method is not only effective at extracting the multi-modal clusters but also fast and easy in terms of computation complexity and relatively robust at the presence of outliers. The performance of the proposed method was evaluated on three generated datasets and six sets of publicly known real world data.

• 한국해안·해양공학회논문집
• /
• 제20권2호
• /
• pp.137-147
• /
• 2008

다중 파괴모드에 대한 경사제 제체의 시스템적 안정성을 신뢰성 이론으로 해석하였다. 먼저 경사제의 안정성과 관련된 네 개의 단일 파괴모드에 대한 신뢰함수가 수립되었다. 각각의 단일 파괴모드에 대한 AFDA 신뢰성 해석 모형이 개발되었으며, CIAD(1985)의 결과와 비교하여 만족스럽게 검증하였다. 단일 파괴모드에 대한 신뢰성 해석에서는 파괴확률 뿐만 아니라 파괴확률에 영향을 미치는 각 확률변수들의 영향계수를 산정하였다. 한편 경사제의 다중 파괴모드에 대한 신뢰성 해석을 수행하기 위해 세 가지, 일차해석법, 이차해석법 그리고 PNET, 해석법이 적용되었다. 해석 결과에 의하면 일차해석법은 파괴확률을 과다 추정하는 경향이 있다. 따라서 다중 파괴모드를 해석할 때는 각 파괴모드간의 상관성을 고려할 수 있는 이차해석법이나 PNET 해석법을 이용하는 것이 바람직하다. 마지막으로 파괴모드간의 상관성에 기인하는 파괴확률의 추가적인 발생 가능성을 다중 파괴모드 해석을 통하여 확인할 수 있었다.

• Structural Engineering and Mechanics
• /
• 제25권1호
• /
• pp.53-73
• /
• 2007

In this study, an effective load increment method for multi modal adaptive non-linear static (pushover) analysis (NSA) for building type structures is presented. In the method, lumped plastisicity approach is adopted and geometrical non-linearties (second-order effects) are included. Non-linear yield conditions of column elements and geometrical non-linearity effects between successive plastic sections are linearized. Thus, load increment needed for formation of plastic sections can be determined directly (without applying iteration or step-by-step techniques) by using linearized yield conditions. After formation of each plastic section, the higher mode effects are considered by utilizing the essentials of traditional response spectrum analysis at linearized regions between plastic sections. Changing dynamic properties due to plastification in the system are used on the calculation of modal lateral loads. Thus, the effects of stiffness changes and local mechanism at the system on lateral load distribution are included. By using the proposed method, solution can be obtained effectively for multi-mode whereby the properties change due to plastifications in the system. In the study, a new procedure for determination of modal lateral loads is also proposed. In order to evaluate the proposed method, a 20 story RC frame building is analyzed and compared with Non-linear Dynamic Analysis (NDA) results and FEMA 356 Non-linear Static Analysis (NSA) procedures using fixed loads distributions (first mode, SRSS and uniform distribution) in terms of different parameters. Second-order effects on response quantities and periods are also investigated. When the NDA results are taken as reference, it is seen that proposed method yield generally better results than all FEMA 356 procedures for all investigated response quantities.

• 한국전산구조공학회논문집
• /
• 제15권3호
• /
• pp.421-432
• /
• 2002

본 연구에서는 진동제어를 목적으로 강성이 평면에서 비대칭적으로 분포된 구조물에 감쇠기를 설치할 경우 감쇠편심과 강성편심에 따른 모드특성 및 변위응답의 변화에 관하여 연구하였다 모드 특성으로는 고유진동수, 모드 감쇠비, 모드참여계수, 동적 증폭계수 등의 변화를 분석하였으며, 변위는 지진이력에 대한 약변, 강변, 무게중심 등에서의 변위를 비교하였다. 또한 이를 바탕으로 비틀림 응답을 최소화하기 위한 감쇠기의 적정 감쇠 편심 및 적정 감쇠 분배 문제에 대해 논하였으며, 단층구조물에서 유도된 적정 감쇠분배 방법을 다층구조뭍에 적용하고 그 효과를 확인하였다.

• 한국정보과학회논문지:소프트웨어및응용
• /
• 제34권4호
• /
• pp.377-388
• /
• 2007

본 연구는 다중 생체 인식 기법을 이용하여 개인 확인 및 인증을 구현한 것으로， 단일생체인식 에서 많이 사용되어 지고 있는 생체 정보 중 얼굴과 지문， 홍채를 이용하여 상호 비교하고 구현하였다. 이를 위한 결합방식으로 단일 생체인식에서 얻은 유사도를 이용하는 방식인 유사도 단계에서의 결합방식을 적용하였으며， 이때의 각 유사도가 동일한 범위가 되도록 하는 여러 가지 균등화 방법에 대하여 연구하였다. 결합방법으로는 가중치 합， Support Vector Machine， Fisher 분류기， 베이시안 분류기를 사용하여 비교하였다. 다양한 실험결과， 사용되는 다중생체인식 조합에 따라 우수한 성능을 보이는 균등화 방법 및 분류기가 다르게 나타남을 알 수 있었다.

• 정보처리학회논문지B
• /
• 제11B권7호
• /
• pp.885-892
• /
• 2004

본 논문에서는 SVM에 기반을 둔 결정법칙에 의해 얼굴인식과 서명인식시스템으로 구성된 다중생체인식시스템을 제안하고자 한다. 이를 위해 퍼지 선형판별기법(Fuzzy Linear Discriminant Analysis : Fnzzy LDA)를 이용한 얼굴인식과 선형판별분석기법과 구간매칭기법을 이용한 서명인식을 구축하였다. 두 개의 단일생체인식시스템을 효과적으로 융합시키기 위해 우선 독립적인 두 개의 생체인식시스템에 의해 산출된 매칭도로부터 등록자(Genuine)와 침입자(Impostor)의 확률 분포 모델을 생성한 후, SVM(Support Vector Machine)에 의해 최종 인증하는 구조로 되어있다. 제안된 방법인 SVM기반 결정법칙을 적용하여 실험한 결과 기존에 결정법칙으로 많이 사용되고 있는 가중치합과 결정트리 방식에 비해 각각 $1.654{\%}$와 $3.3{\%}$의 인식률 향상을 나타내 제안된 방법의 우수성을 나타냈다.

• Communications for Statistical Applications and Methods
• /
• 제14권3호
• /
• pp.517-530
• /
• 2007

We studied a modelling process for unimodal and multimodal circular data by using von Mises and its mixture distribution. In particular we suggested EM algorithm to find ML estimates of the mixture model. Simulation results showed the suggested methods are very accurate. Applications to two kinds of real data sets are also included.

• Design & Manufacturing
• /
• 제15권1호
• /
• pp.66-71
• /
• 2021

In this study, die turning injection(DTI) mold design for manufacturing reservoir fluid tanks used for cooling in-vehicle batteries, inverters, and motors was conducted based on multi-field CAE. Part design, performance evaluation, and mold design of the reservoir fluid tank was performed. The frequency response characteristics through modal and harmonic response analysis to satisfy the automotive performance test items for the designed part were examined. Analysis of re-melting characteristics and structural analysis of the driving part for designing the rotating die of the DTI mold were performed. Part design was possible when the natural frequency performance value of 32Hz or higher was satisfied through finite element analysis, and the temperature distribution and deformation characteristics of the part after injection molding were found through the first injection molding analysis. In addition, it can be seen that the temperature change of the primary part greatly influences the re-melting characteristics during the secondary injection. The minimum force for driving the turning die of the designed mold was calculated through structural analysis. Hydraulic system design was possible. Finally, a precise and efficient DTI mold design for the reservoir fluid tank was possible through presented multi-field CAE process.

• Management Science and Financial Engineering
• /
• 제19권2호
• /
• pp.49-53
• /
• 2013

A Markov-chain Monte Carlo sampling algorithm samples a new point around the latest sample due to the Markov property, which prevents it from sampling from multi-modal distributions since the corresponding chain often fails to search entire support of the target distribution. In this paper, to overcome this problem, mode switching scheme is applied to the conventional MCMC algorithms. The algorithm separates the reducible Markov chain into several mutually exclusive classes and use mode switching scheme to increase mixing rate. Simulation results are given to illustrate the algorithm with promising results.

• 한국농공학회지
• /
• 제38권4호
• /
• pp.110-124
• /
• 1996

This study was conducted to simulate long seres of synthetic monthly flows by multi-season first order Markov model with selection of best fitting frequency distribution, harmonic synthetic and harmonic regression models and to make a comparison of statistical parameters between observes and synthetic flows of five watersheds in Geum river system. The results obtained through this study can be summarized as follow. 1. Both gamma and two parameter lognormal distributions were found to be suitable ones for monthly flows in all watersheds by Kolmogorov-Smirnov test. 2. It was found that arithmetic mean values of synthetic monthly flows simulated by multi-season first order Markov model with gamma distribution are much closer to the results of the observed data in comparison with those of the other models in the applied watersheds. 3. The coefficients of variation, index of fluctuation for monthly flows simulated by multi-season first order Markov model with gamma distribution are appeared closer to those of the observed data in comparison with those of the other models in Geum river system. 4. Synthetic monthly flows were simulated over 100 years by multi-season first order Markov model with gamma distribution which is acknowledged as a suitable simulation modal in this study.