• 사물인터넷융복합논문지
• /
• 제9권4호
• /
• pp.9-14
• /
• 2023

최근 엔터프라이즈 및 데이터 센터에서는 급격하게 증가하고 있는 빅데이터를 관리하기 위한 자원 최적화 연구가 활발하게 진행되고 있다. 특히 고정 할당된 저장 자원과 비교하여 많은 자원을 할당하는 씬프로비저닝은 초기 비용을 줄이는 효과가 있으나 실제로 사용하는 자원이 증가할수록 비용의 효과는 감소하고 자원을 할당하기 위한 관리 비용이 증가하는 문제가 있다. 본 논문에서는 플래시 메모리의 물리적 블록을 단일 비트 셀과 다중 비트 셀로 구분하여 하이브리드 기법으로 포맷하고, 빈번하게 사용하는 핫 데이터와 사용량이 적은 콜드 데이터를 구분하여 관리하는 기법을 제안한다. 제안하는 기법은 씩프로비저닝과 같이 물리적으로 자원과 할당된 자원이 동일하여 추가적인 비용 증가 없이 사용할 수 있으며, 사용량이 적은 자원을 다중 비트 셀 블록에 관리하여 씬프로비저닝과 같이 일반적인 저장장치보다 더 많은 자원을 할당할 수 있는 장점이 있다. 마지막으로 시뮬레이션을 기반으로 실험을 통해 제안하는 기법의 자원 최적화 효과를 측정하였다.

• International Journal of Naval Architecture and Ocean Engineering
• /
• 제10권5호
• /
• pp.651-659
• /
• 2018

A multi-level overtopping wave energy converter was designed according to the large tidal range and small wave heights in China. It consists of two reservoirs with sloping walls at different levels. The reservoirs share a common outflow duct and a low-head axial turbine. The experimental study was carried out in a laboratory wave-flume to investigate the overtopping performance of the device. The depth-gauges were used to measure the variation of the water level in the reservoirs. The data was processed to derive the time-averaged overtopping discharges. It was found that the lower reservoir can store wave waters at the low water level and break the waves which try to climb up to the upper reservoir. The upper sloping angle and the opening width of the lower reservoir both have significant effects on the overtopping discharges, which can provide more information to the design and optimization of this type of device.

• Industrial Engineering and Management Systems
• /
• 제14권1호
• /
• pp.1-10
• /
• 2015

In this paper, we consider multi-item inventory management. When managing a multi-item inventory, we coordinate replenishment orders of items supplied by the same supplier. The associated problem is called the joint replenishment problem (JRP). One often-used approach to the JRP is to apply a can-order policy. Under a can-order policy, some items are re-ordered when their inventory level drops to or below their re-order level, and any other item with an inventory level at or below its can-order level can be included in this order. In the present paper, we propose a method for finding the optimal parameter of a can-order policy, the can-order level, for each item in a lost-sales model. The main objectives in our model are minimizing the number of ordering, inventory, and shortage (i.e., lost-sales) respectively, compared with the conventional JRP, in which the objective is to minimize total cost. In order to solve this multi-objective optimization problem, we apply a genetic algorithm. In a numerical experiment using actual shipment data, we simulate the proposed model and compare the results with those of other methods.

• Journal of Advanced Marine Engineering and Technology
• /
• 제38권8호
• /
• pp.1004-1009
• /
• 2014

The redundancy allocation problem has usually considered only the component redundancy at the lowest-level for the enhancement of system reliability. A system can be functionally decomposed into system, module, and component levels. Modular redundancy can be more effective than component redundancy at the lowest-level because in modular systems, duplicating a module composed of several components can be easier, and requires less time and skill. We consider a multi-level redundancy allocation problem in which all cases of redundancy for system, module, and component levels are considered. A tabu search of memory-based mechanisms that balances intensification with diversification via the short-term and long-term memory is proposed for its solution. To the best of our knowledge, this is the first attempt to use a tabu search for this problem. Our tabu search algorithm is compared with the previous genetic algorithm for the problem on the new composed test problems as well as the benchmark problems from the literature. Computational results show that the proposed method outstandingly outperforms the genetic algorithm for almost all test problems.

• 산업공학
• /
• 제21권4호
• /
• pp.444-455
• /
• 2008

In the present manufacturing environment, the appropriate decision making strategy has a significance and it should count on the fast-changing demand of customers. This research derives the optimal levels of the decision variables affecting the inventory related performance in multi-stage supply chain by using simulation and genetic algorithm. Simulation model helps analyze the customer service level of the supply chain computationally and the genetic algorithm searches the optimal solutions by interaction with the simulation model. Our experiments show that the integration approach of the genetic algorithm with a simulation model is effective in finding the solutions that achieve predefined target service levels.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2012년도 한국컴퓨터종합학술대회논문집 Vol.39 No.1(D)
• /
• pp.297-299
• /
• 2012

In this paper, we introduce a joint flow control and scheduling algorithm for multi-hop cognitive radio networks with spectrum underlay. Our proposed algorithm maximizes the total utility of secondary users while stabilizing the cognitive radio network and still satisfies the total interference from secondary users to primary network is less than an accepted level. Based on Lyapunov optimization technique, we show that our scheme is arbitrarily close to the optimal.

• 대한임베디드공학회논문지
• /
• 제15권3호
• /
• pp.111-118
• /
• 2020

We investigate the optimization problem of transmit power control and MMSE Receiver filter for multi access points environment. Previous work showed that increasing the number of access points decreases the transmit power consumption. Accordingly, transmit power control algorithm was developed in such a way that the transmit power is minimized, while each terminal meets Signal to Interference and Noise Ratio Requirement. In this work, we further reduce the transmit power consumption by optimizing the transmit power level and the MMSE receiver filter together. We showed that the proposed joint optimization algorithm satisfies the necessary and sufficient conditions to be standard interference function, which guarantees convergence and minimum transmit power consumption. We observed that the proposed algorithm outperforms the algorithm which only optimizes the transmit power.

• ETRI Journal
• /
• 제32권4호
• /
• pp.634-637
• /
• 2010

This letter presents a model for a dynamic collaboration (DC) platform among cloud providers (CPs) that prevents adverse business impacts, cloud vendor lock-in and violation of service level agreements with consumers, and also offers collaborative cloud services to consumers. We consider two major challenges. The first challenge is to find an appropriate market model in order to enable the DC platform. The second is to select suitable collaborative partners to provide services. We propose a novel combinatorial auction-based cloud market model that enables a DC platform among CPs. We also propose a new promising multi-objective optimization model to quantitatively evaluate the partners. Simulation experiments were conducted to verify both of the proposed models.

• 유체기계공업학회:학술대회논문집
• /
• 유체기계공업학회 2006년 제4회 한국유체공학학술대회 논문집
• /
• pp.367-370
• /
• 2006

Performances of multiple surrogate models are evaluated in a turbomachinery blade shape optimization. The basic models, i.e., Response Surface Approximation, Kriging and Radial Basis Neural Network models as well as weighted average models are tested for shape optimization. Global data based errors for each surrogates are used to calculate the weights. These weights are multiplied with the respective surrogates to get the final weighted average models. The design points are selected using three level fractional factorial D-optimal designs. The present approach can help address the multi-objective design on a rational basis with quantifiable cost-benefit analysis.

• 한국소음진동공학회논문집
• /
• 제15권11호
• /
• pp.1223-1231
• /
• 2005

Recently, the issue of ship nitration due to the large scale, high speed and lightweight of ship is emerging. For pleasantness in the cabin, shipbuilders are asked for strict vibration criteria and the degree of nitration level at a deckhouse became an important condition for taking order from customers. This study proposes a new optimization framework that is NASTRAN external call type optimization method (OptShip) and applies to an optimum design to decrease the nitration level of a deckhouse. The merits of this method are capable of using of global searching method and selecting of various objective function and design variables. The global optimization algorithms used here are random tabu search method which has fast converging speed and searches various size domains and genetic algorithm which searches multi-point solutions and has a good search capability in a complex space. By adapting OptShip to full-scale model, the validity of the suggested method was investigated.