• 한국정밀공학회지
• /
• 제25권12호
• /
• pp.39-46
• /
• 2008

Asymmetric glass lens core for portable projection optic system was designed and simulated. And it was machined by newly developed non-rotational ultra precision grinding method. With the designed lens data which optimized for multi-collimation, we generated the we core surface data. Mold pressing conditions analyzed by FEM. In the machining process, ground profile errors were compensated based on measured data, minimized feed rate and depth of cut. The deviations of machined core profile were acceptable level for glass mold press. Mold pressed glass array lens was coated with $SiO_2\;and\;Ta_2O_5$ for anti-reflection.

• 한국기계가공학회지
• /
• 제7권4호
• /
• pp.17-23
• /
• 2008

Development of die technology for holder and barrel dies is necessary according to minimization of lens assembly, image sensor, and connectors. In these cases, there are two technical problems arising from die design. One is determination of knock-out pin location in die set. Minimization of lens assembly size make it difficult to obtain ejecting space. The other is whether or not high-precision die technology is possible to reduce torque variation when holer and barrel products is assembled. In this study, multi-cavity die set was developed taking advantage of gear-driven ejecting method. In the developed technology, die manufacturing technology was guaranteed with a high-precision level.

• 한국음향학회지
• /
• 제34권4호
• /
• pp.264-273
• /
• 2015

본 논문에서는 의료용 초음파 트랜스듀서의 방사 빔 형상의 개선에 관하여 연구하였다. 빔 형상의 개선을 위하여 분할전극과 다초점 렌즈를 포함하는 새로운 트랜스듀서 구조를 고안하였다. 먼저 선형 음원에 대해 유한요소 해석을 통해 빔 형상을 분석한 후, 부엽의 크기, 집속구간 및 빔폭 등의 성능들을 동시에 고려하여 고안된 구조의 최적설계를 수행하였다. 이때 집속구간과 최소 빔폭의 비율을 성능지수로 사용하여 고안된 구조의 최적치수를 도출하였다. 그 결과 부엽의 크기가 -20.2 dB로 작고, 최소 빔폭이 2.04 mm이고 깊이 30 mm부터 160 mm까지 좁고 일정한 빔폭을 가지도록 빔 형상이 개선되었다. 나아가, 고안된 구조를 가지도록 트랜스듀서 시편을 제작하고 빔 패턴을 측정하여 해석 결과와 비교함으로써, 고안된 트랜스듀서 구조의 타당성을 검증하였다.

• Asia pacific journal of information systems
• /
• 제33권2호
• /
• pp.418-443
• /
• 2023

Many organizations facilitate a host of online knowledge sharing communities to assist internal knowledge sharing and operation. The permeable boundaries and voluntary structures of online communities allow individuals to span community boundaries and affect member resources and structures. Although much research has been done on members' knowledge contribution in online communities, relatively little is known about how a member's contribution to a community is shaped by the cross-level interactions of member's external boundary spanning and the community's environmental scanning or membership fluidity. Drawing from the theoretical lens of boundary spanning and the external view of online communities, we take a multi-level approach in the analysis of the activities of 1,992 members of 126 communities internal to a global company. We find that a member's external boundary spanning activity (e.g., external knowledge acquisition via reading posts) has a positive effect, though at a decreasing rate, on subsequent internal knowledge contribution (e.g., posting replies in the member's home community). This positive effect is stronger in communities that are more active in environmental scanning or have fluid membership and weaker in communities that are less active in environmental scanning or have stable membership.

• 한국광학회지
• /
• 제15권4호
• /
• pp.299-308
• /
• 2004

공액상 없이 여러 가지 물체를 동시에 재생 가능한 다채널 다단계 위상형 컴퓨터-생성 홀로그램(CGH)을 설계할 수 있는 보다 효과적인 부호화 방법을 제안하였다. 다채널 CGH 패턴을 설계하기 위하여 pixel oriented CGH 제작방식을 이용하였다. 설계된 CGH 패턴의 성능평가를 위해 양자화 위상 단계수에 따른 여러 가지 다채널 CGH들의 회절효율(η), 평균제곱에러(MSE) 및 신호 대 잡음비(SNR) 등의 변화를 살펴보았다. 일반적으로 CGH에 기록되는 물체 수가 증가할수록 CGH의 재생품질은 떨어진다. 그러나 회절효율의 경우 1채널 CGH가 70%이고 제안한 부호화 방법으로 설계한 2채널, 4채널, 8채널 CGH들은 각각 62%, 62%, 63%로 채널수가 증가하여도 큰 차이가 없음을 컴퓨터 모의실험을 통하여 확인할 수 있었다. 또한 렌즈로 결합되어 있는 PAL-SLM과 XGA형 LCD 그리고 이에 빛을 조명하는 LD 등으로 구성되어 있는 액정 공간 광 위상 변조기를 사용하여 광학적으로 CGH를 구현하여 입력영상을 재생$.$고찰해 보았다.

• Journal of Contemporary Eastern Asia
• /
• 제17권1호
• /
• pp.68-93
• /
• 2018

With the emergence of partnerships with private actors in public and cultural diplomacies, complexity in the relations among the various stakeholders involved has arisen, and yet the relevant research is insufficient to shed any beneficial light on such issues. By looking at public-private partnerships, the present study determined that resource dependence, trust, and risk are the main factors affecting the feasibility of partnerships, and inductively developed propositions on their effects. In an explorative case study, Germany (decentralized mode of governance) and South Korea (centralized mode of governance) were compared as exemplary contrasting system designs. The results revealed that risk and trust are likely to affect the feasibility of partnerships, whereas resource dependence is not. The following additional findings also were made: (1) there are cultural actors in a 'for profit, but with non-profit purposes' sector; (2) an interpersonal level of trust positively affects partnerships; (3) 'taking risks' brings about 'innovation'; (4) the existence of international commonalities between any two cases depending on the actors' shared role, whether public or private; (5) public actors' emphasis on mutual trust, program budget and execution, innovations coming from taking risks, commitment and ownership, and unexpected situations; (6) private actors' consideration of 'publicness' and grant-seeking or financial support as important incentives, and their desire that public actors to show more trust, professionalism, and ownership with less control over budget execution. With its qualitative approach and in-depth analysis, the present study yielded new insights, notwithstanding the relatively small sample data.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 2005년도 추계학술대회 논문집
• /
• pp.882-884
• /
• 2005

A new rectangular shape microlens array having high sag for solid-state lighting is presented. Proposed microlens, which has high sag, over $375{\mu}m$ and large diameter, over 3 mm can enormously enhance output optical extraction efficiency. Rectangular shape of microlens can maximize the fill factor of light-emitting-diode (LED) package and minimize the optical loss at the same time. This wafer level microlens array is fabricated on LED package. It has many advantages in optical properties, low cost, high aligning accuracy, and mass production.

• 한국작물학회:학술대회논문집
• /
• 한국작물학회 2022년도 추계학술대회
• /
• pp.108-108
• /
• 2022

In this study, multispectral images of wheat according to soil water state were collected, compared, and analyzed to measure the physiological response of crops to environmental stress at the individual level. CMS-V multi-spectral camera(Silios Technologies) was used for image acquisition. The camera lens consists of eight spectral bands between 550nm and 830nm. Light Reflective information collected in each band sensor and stored in digital values, and it is converted into a reflectance for calculating the vegetation index and used. According to the camera manual, the NDVI(Normalized Difference vegetation index) value was calculated using 628 nm and 752 nm bands. Image measurement was conducted under natural light conditions, and reflectance standards(Labsphere) were captured with plants for reflectance calculation. The wheat variety used Gosomil, and the wheat grown in the field was transplanted into a pot after heading date and measured. Three treatments were performed so that the soil volumetric water content of the pot was 13~17%, 20~23%, and 25%, and the growth response of wheat according to each treatment was compared using the NDVI value. In the first measurement after port transplantation, the difference in NDVI value according to treatment was not significant, but in the subsequent measurement, the NDVI value of the treatment with a water content of 13 to 17% was lowest and was the highest at 20 to 23%. The NDVI values decreased compared to the first measurement in all treatment, and the decrease was the largest at 13-17% water content and the smallest at 20-23%. Although the difference in NDVI values could be confirmed, it would be difficult to directly relate it to the water stress of plants, and further research on the response of crops to environmental stress and the analysis of multi-spectral image will be needed.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2008년도 추계학술대회 논문집 Vol.21
• /
• pp.430-430
• /
• 2008

Using multi plasma enhanced chemical vapor deposition system (Multi-PECVD), p-a-Si:H deposition layer as a $p^+$ region which was annealed by laser (Q-switched fiber laser, $\lambda$ = 1064 nm) on an n-type single crystalline Si (100) plane circle wafer was prepared as new doping method for single crystalline interdigitated back contact (IBC) solar cells. As lots of earlier studies implemented, most cases dealt with the excimer (excited dimer) laserannealing or crystallization of boron with the ultraviolet wavelength range and $10^{-9}$ sec pulse duration. In this study, the Q-switched fiber laser which has higher power, longer wavelength of infrared range ($\lambda$ = 1064 nm) and longer pulse duration of $10^{-8}$ sec than excimer laser was introduced for uniformly deposited p-a-Si:H layer to be annealed and to make sheet resistance expectable as an important process for IBC solar cell $p^+$ layer on a polished n-type Si circle wafer. A $525{\mu}m$ thick n-type Si semiconductor circle wafer of (100) plane which was dipped in a buffered hydrofluoric acid solution for 30 seconds was mounted on the Multi-PECVD system for p-a-Si:H deposition layer with the ratio of $SiH_4:H_2:B_2H_6$ = 30:120:30, at $200^{\circ}C$, 50 W power, 0.2 Torr pressure for 20 minutes. 15 mm $\times$ 15 mm size laser cut samples were annealed by fiber laser with different sets of power levels and frequencies. By comparing the results of lifetime measurement and sheet resistance relation, the laser condition set of 50 mm/s of mark speed, 160 kHz of period, 21 % of power level with continuous wave mode of scanner lens showed the features of small difference of lifetime and lowering sheet resistance than before the fiber laser treatment with not much surface damages. Diode level device was made to confirm these experimental results by measuring C-V, I-V characteristics. Uniform and expectable boron doped layer can play an important role to predict the efficiency during the fabricating process of IBC solar cells.

• Journal of Information Processing Systems
• /
• 제19권6호
• /
• pp.791-802
• /
• 2023

The manual inspection of photovoltaic (PV) panels to meet the requirements of inspection work for large-scale PV power plants is challenging. We present a hot spot detection and positioning method to detect hot spots in batches and locate their latitudes and longitudes. First, a network based on the YOLOv3 architecture was utilized to identify hot spots. The innovation is to modify the RU_1 unit in the YOLOv3 model for hot spot detection in the far field of view and add a neural network residual unit for fusion. In addition, because of the misidentification problem in the infrared images of the solar PV panels, the DeepLab v3+ model was adopted to segment the PV panels to filter out the misidentification caused by bright spots on the ground. Finally, the latitude and longitude of the hot spot are calculated according to the geometric positioning method utilizing known information such as the drone's yaw angle, shooting height, and lens field-of-view. The experimental results indicate that the hot spot recognition rate accuracy is above 98%. When keeping the drone 25 m off the ground, the hot spot positioning error is at the decimeter level.