• 한국통신학회논문지
• /
• 제34권5B호
• /
• pp.532-541
• /
• 2009

최근 급속히 발전하고 있는 RFID 기술의 대표적인 이용 사례로는 항만에서의 사용을 들 수 있다. 실제로 미국 및 유럽의 항만에서는 넓은 작업장에 산재한 컨테이너와 각종 장비들에 433MHz 능동형 태그를 부착하고, 이를 기반으로 게이트 자동화, 컨테이너 선적 및 하역의 자동화, 각종 장비의 위치 파악 및 관리를 수행하고 있다. 그러나, 완전한 자동화를 위해서는 해결해야 할 문제가 있다. RFID 통신의 기본 구조는 리더가 자신의 통신 범위 안에 있는 태그와 직접 통신만을 할 수 있는데, 항만에서는 금속성의 컨테이너와 각종 장비들에 의한 전파 방해 때문에 음영지역(dead-zone)이 발생하여 모든 태그의 정보를 완벽히 수집하지 못하는 경우가 있을 수 있다. 음영지역 문제는 몇 가지 방법으로 해결 가능하지만, 본 논문에서는 그 중 가장 경제적인, RFID 태그간의 다중 홉(multi-hop) 통신을 이용한 방법을 제안한다. 기존에 지원되지 않던 태그간의 다중 홉 통신이 기존의 통신 구조와 병립되어 서비스되기 위해 필요한 새로운 통신 구조를 자세히 살펴볼 것이다.

• 대한방사선치료학회지
• /
• 제27권2호
• /
• pp.123-129
• /
• 2015

목 적 : 본 연구에서는 원격 후 장전치료기를 이용한 근접치료 시, 선원 위치 부정확성의 기하학적 요인인 선원 전달도관의 늘어진 정도를 나타내는 곡률과, 각기 다른 기구의 형태가 선원 위치 재현성에 미치는 영향을 분석하고자 한다. 대상 및 방법 : HDR plus 3.0.5로 선원의 위치 간격 1 cm 씩 10 개의 지점으로 선원이 각 위치에 머무는 시간을 15 초로 하는 치료 계획을 수립하였다. 선원 전달도관(Universal applicator transfer tube)의 늘어짐이 선원의 위치 정확성에 미치는 영향을 파악하기 위하여 선원 전달도관을 MultiSource container에서 GAFCHROMIC$^{(R)}$ EBT3 film 까지 일직선으로 연결한 후, 이 위치부터 MultiSource container를 필름 방향으로 5 cm, 10 cm, 20 cm으로 이동하여 선원의 위치를 측정하였다. 또한 각기 다른 각도를 가진 기구(applicator) 4 종류($0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $65^{\circ}$)에 대해서도 동일한 방법으로 실험을 하였다. 분석을 위해 Image J를 이용하여 선원의 위치 차이 값을 획득하였고 이를 비교 분석하였다. 결 과 : 선원 전달 도관의 형태가 곡률이 없는 일직선일 경우, 형태가 다른 기구의 선원 위치 평균 오차는 기구의 각도가 $0^{\circ}$, $15^{\circ}$, $30^{\circ}$, $65^{\circ}$일 때, 각각 0.90 mm, 0.96 mm, 1.66 mm, 1.83 mm로 나타났고, 선원 위치 오차범위 ${\pm}2mm$ 내에 있는 것으로 확인되었다. MultiSource container을 필름 방향으로 5 cm, 10 cm, 20 cm 이동하였을 때 기구 형태 별 선원 위치의 평균 오차는 증가하였고, 그 값은 ${\pm}2mm$를 초과하였다. 또한, 좌표값을 분석한 결과 4 종류의 기구 모두 치료계획 상의 선원 위치보다 윗부분으로 치우치는 방향성을 나타냈다. 결 론 : 선원 위치의 오차는 선원 전달도관의 곡률과 치료 시 사용되는 기구의 형태에 모두 영향을 받는 것으로 나타났다. 선원 전달도관과 기구 모두 직선의 형태를 갖추고 있을 때 선원 위치 오차가 가장 작았다. 본 연구를 바탕으로 근접치료 시, 선원 전달도관의 곡률 발생을 최소화하여 최대한 직선의 형태로 유지시켜야 할 것이며, 치료 시 사용되는 기구의 굴곡이나 폐암의 기관지 내 강내조사와 같이 곡률이 발생할 수밖에 없는 경우에는 선원 위치점검이 선행되어야 할 것으로 사료된다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2003년도 ICCAS
• /
• pp.392-395
• /
• 2003

In the maritime container terminal, LMTT (Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV (Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 한국기계연구소 소보
• /
• 통권14호
• /
• pp.157-168
• /
• 1985

In cargo vessels, hatch covers are used to prevent sea water from penetrating into the cargo hold and to keep the vessels buoyant. And also they can be used as cargo loading devices as in container ships. In this paper, hatch covers are classified according to their operation method and their characteristics are briefly demonstrated. Systematic description on the scantling of the hatch cover panel and how to determine the capacity of the hydraulic power system fir folding hatch cover panels are also presented. The hydraulic power system is selected from the result of dynamic analysis of the movements of the hatch cover panels when stored on the upper deck. The hatch coaming height is determined as shortly as the hydraulic cylinders can be installed. This study deals with the hatch cover system of the medium sized multi-purpose cargo vessel, but the results of this study can be applied to large-sized cargo vessels with a slight change of the input data in the calculations. Further research on the high pressure pump, hydraulic cleating system and hydraulic piping will realize domestic production of the whole hatch cover system which have been supplied from foreign makers until now

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 2003년도 ISIS 2003
• /
• pp.307-310
• /
• 2003

In the maritime container terminal, LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system for the yard automation, which has been proposed to take the place of AGV(Automated Guided Vehicle). The system is based on PMLSM (Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car (mover). Because of large variant of mover's weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's trouble etc., LMCPS (Linear Motor Conveyance Positioning System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCPS using DR-FNN (Dynamically-constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2206-2208
• /
• 2003

LMTT(Linear Motor-based Transfer Technology) is horizontal transfer system in the maritime container terminal for the port automation. The system is modeled PMLSM(Permanent Magnetic Linear Synchronous Motor) that is consists of stator modules on the rail and shuttle car(mover). Because of large variant of movers weight by loading and unloading containers, the difference of each characteristic of stator modules, and a stator module's default etc., LMCS(Linear Motor Conveyance System) is considered as that the system is changed its model suddenly and variously. In this paper, we will introduce the soft-computing method of a multi-step prediction control for LMCS using DR-FNN(Dynamically Constructed Recurrent Fuzzy Neural Network). The proposed control system is used two networks for multi-step prediction. Consequently, the system has an ability to adapt for external disturbance, cogging force, force ripple, and sudden changes of itself.

• 대한조선학회논문집
• /
• 제42권5호
• /
• pp.479-486
• /
• 2005

The final goal of shift alignment design is that the bearing reaction forces or mean pressures are within design boundaries for various service conditions of a ship. However, it is found that calculated bearing load can be substantially variable according to the locations of the effective support points of after sterntube bearing which are determined by simple calculation or assumption suggested by classification societies. A new analysis method for shaft alignment calculation is introduced in order to resolve these problems. Key concept of the new method is featured by adopting both nonlinear elastic and multi-support elements to simulate a bearing support Hertz contact theory is basically applied for nonlinear elastic stiffness calculation instead of the projected area method suggested by most of classification societies. Three loading conditions according to the bearing offset and the hydrodynamic moment and twelve models according to the locations of the effective support points of sterntube bearings are prepared to carry out quantitative verifications for an actual shafting system of 8000 TEU class container vessel. It is found that there is relatively large difference between assumed and calculated effective support points.

• International Journal of Ocean System Engineering
• /
• 제2권3호
• /
• pp.160-169
• /
• 2012

Flux Cored Arc Welding (FCAW) is a common practice to join thick plates such as the structural members of large scale offshore structures and very large container ships. The objective of this study was to investigate the mechanical properties and variability of the fatigue crack initiation life in the flux cored arc welded API 2W Gr.50 steel joints typically applied to offshore structures with a focus on the effect of the materials in fatigue crack growth life from the notch root of a compact tension specimen. Offshore structural steel (API 2W Gr.50) plates (60-mm thick) were used to fabricate multi-path flux core arc welded butt welded joints to clearly consider fatigue fractures at the weld zone from the notch. Fatigue tests were performed under a constant amplitude cyclic loading of R = 0.4. The mean fatigue crack initiation life of the HAZ specimen was the highest among the base metal (BM), weld metal (WM), and heat affected zone (HAZ). In addition, the coefficient of variation was the highest in the WMl specimen. The variability of the short fatigue crack growth rates from the notch tips in the WM and HAZ specimens was higher than in BM.

• 대한조선학회논문집
• /
• 제43권4호
• /
• pp.512-520
• /
• 2006

The effects of flexibilities of supporting structures on shaft alignment are growing as ship sizes are Increasing mainly for container carrier and LNG carrier. But, most of classification societies not only do not suggest any quantitative guidelines about the flexibilities but also do not have shaft alignment design program considering the flexibility of supporting structures. A newly developed program, which is based on innovative shaft alignment technologies including nonlinear elastic multi-support bearing concept and hull deflection database approach, has S basic modules : 1)fully automated finite element generation module, 2) hull deflection database and it's mapping module on bearings, 3) squeezing and oil film pressure calculation module, 4) optimization module and 5) gap & sag calculation module. First module can generate finite element model including shafts, bearings, bearing seats, hull and engine housing without any misalignment of nodes. Hull deflection database module has built-in absolute deflection data for various ship types, sizes and loading conditions and imposes the transformed relative deflection data on shafting system. The squeezing of lining material and oil film pressures, which are relatively solved by Hertz contact theory and built-in hydrodynamic engine, can be calculated and visualized by pressure calculation module. One of the most representative capabilities is an optimization module based on both DOE and Hooke-Jeeves algorithm.

• 대한조선학회논문집
• /
• 제42권3호
• /
• pp.259-267
• /
• 2005

The effects of hull flexibility on shaft alignment are growing as ship sizes are increased mainly for container carrier and LNG carrier. In order to consider hull flexibility on a propulsion shafting system, standardization of ship service conditions is necessary because hull deformation is continuously variable according to ship service conditions. How to summarize ship service conditions is suggested based on practically applicable four viewpoints : hull, engine, loading and sea status. Effects of the external forces acting on a ship propulsion shafting system are generally commented. Several design criteria regulated by classification societies are pointed at issue which seems to have Insufficient technical background. A qualitative verification is carried out to point out the invalidity of the assumption of effective supporting position. In this work, an elastic nonlinear multi-supporting bearing system is introduced as a key concept of the elastic shaft alignment. Hertz contact theory is proved to be more proper one than projected area method in calculation of the nonlinear elastic stiffness of the bearing, The squeezing and oil film pressure calculations in the long journal bearing like an after stern tube bearing are recognized as a necessary process for elastic shaft alignment design.