• Journal of KIISE:Information Networking
• /
• v.31 no.2
• /
• pp.196-206
• /
• 2004

In the Next Generation Internet(NGI) backbone network, a Dense Wavelength Division Multiplexing (DWDM) technology has been more and more highlighted to cover the increasing subscribers and bandwidth requirement. For such a DWDM network, Routine and Wavelength Assignment (RWA) is the essential problem to establish the optimal path and assign a wavelength efficiently to the selected path in resource utilization. However, the existing RWA algorithms do not consider the congestion in the network so that the performance of then is so limited. To solve this problem, in this paper, we introduce a new RWA algorithm, called Multi Wavelength-Minimum Interference path Routing (MW-MIPR) that establishes a routing path to minimize the interference for many potential future connection setup request. And then, we also propose a wavelength-routed QoS routing scheme based on differentiated QoS classes with applying MW-MIPR algorithm. Simulation results are also given to prove the efficiency of the proposed algorithms.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.33 no.12B
• /
• pp.1083-1096
• /
• 2008

This paper proposes an energy-aware path management scheme, so-called the TBP(Threshold based Back-Pressure) algorithm, which is designed for lifetime extension of the energy-constrained wireless sensor networks. With the goal of fair energy consumptions, we extensively utilize the available paths between the source and the sink nodes. The traffic distribution feature of the TBP algorithm operates in two scales; the local and the whole routing area. The threshold and the back-pressure signal are introduced for implementing those operations. It is noticeable that the TBP algorithm maintains the scalability by defining both the threshold and the back-pressure signal to have their meanings locally confined to one hop only. Throughout several experiments, we observe that the TBP algorithm enhances the network-wide energy distribution. which implies the extension of the network lifetime. Additionally, both the delay and the throughput outcomes show remarkable improvements. This shows that the energy-aware path control scheme holds the effects of the congestion control.

• Journal of KIISE:Software and Applications
• /
• v.34 no.11
• /
• pp.991-1000
• /
• 2007

A new robust approach to detect vehicles in a single frame of traffic scenes is presented. The method is based on the multi-level shadow classification, which has been shown to have the capability of extracting correct shadow shapes regardless of the operating conditions. The rationale of this classification is supported by the fact that shadow regions underneath vehicles usually exhibit darker gray level regardless of the vehicle brightness and illuminating conditions. Classified shadows provide string clues on the presence of vehicles. Unlike other schemes, neither background nor temporal information is utilized; thereby the performance is robust to the abrupt change of weather and the traffic congestion. By a simple evidential reasoning, the shadow evidences are combined with bright evidences to locate correct position of vehicles. Experimental results show the missing rate ranges form 0.9% to 7.2%, while the false alarm rate is below 4% for six traffic scenes sets under different operating conditions. The processing speed for more than 70 frames per second could be obtained for nominal image size, which makes the real-time implementation of measuring the traffic parameters possible.

• Journal of Internet Computing and Services
• /
• v.11 no.1
• /
• pp.1-13
• /
• 2010

It is not easy to set RED(Random Early Detection) parameter according to environment in managing Network Device. Especially, it is more difficult to set parameter in the case of maintaining the constant service rate according to the change of environment. In this paper, we hypothesize the router that has Multi-core CPU in output queue and propose AI RED(Artificial Intelligence RED), which directly induces Genetic Algorithm of Artificial Intelligence in the output queue that is appropriate to the optimization of parameter according to RED environment, which is automatically adaptive to workload. As a result, AI RED Is simpler and finer than FuRED(Fuzzy-Logic-based RED), and RED parameter that AI RED searches through simulations is more adaptive to environment than standard RED parameter, providing the effective service. Consequently, the automation of management of RED parameter can provide a manager with the enhancement of efficiency in Network management.

• Journal of Fisheries and Marine Sciences Education
• /
• v.10 no.1
• /
• pp.1-14
• /
• 1998

Transportation provides an infrastructure vital to economic growth, and it is also an integral part of production. As a port is regarded as the interface between the maritime transport and domestic transport sectors, it certainly play a key role in any economic development. Ship's delay caused by port congestion has recently has recently attracted attended with the analysis of overall operation in port. In order to analyse complicated port operation which contains large number of variable factors, queueing theory is needed to be adopted, which is applicable to a large scale transportation system in chiding ship's delay in Inchon port in relation to ship's delay problem. The overall findings are as follows ; 1. The stucture of queueing model in this port can be represented as a complex of multi-channel single-phase 2. Ship's arrival and service pattern were Poisson Input Erlangian Service. 3. The suitable formula to calculate the mean delay in this port, namely, $W_q={\frac{{\rho}}{{\lambda}(1-{\rho})}}{\frac{e{\small{N}}({\rho}{\cdot}N)}{D_{N-1}({\rho}{\cdot}N)}}$ Where, ${\lambda}$ : mean arrival rate ${\mu}$ : mean servicing rate N : number of servicing channel ${\rho}$ : utilization rate (l/Nm) $e{\small{N}}$ : the Poisson function $D_{(n-1)}$ : a function of the cumulative Poisson function 4. The utility rate is 95.0 percents in general piers, 75.39 percents in container piers, and watiting time 28.43 hours in general piers, 13.67 hours in container piers, and the length of queue is 6.17 ships in general piers, 0.93 ships in container piers, and the ship turnaround time is 107.03 hours in general piers, 51.93 hours in container piers.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.25 no.1
• /
• pp.146-151
• /
• 2021

Currently, the demand for vehicles from one family is increasing in many countries at home and abroad, reducing the number of people on the vehicle and increasing the number of vehicles on the road. The multi-passenger lane system, which is available to solve the problem of traffic congestion, is being implemented. The system allows police to monitor fast-moving vehicles with their own eyes to crack down on illegal vehicles, which is less accurate and accompanied by the risk of accidents. To address these problems, applying deep learning object recognition techniques using images from road sites will solve the aforementioned problems. Therefore, in this paper, we compare and analyze the performance of existing deep learning models, select a deep learning model that can identify real-time vehicle occupants through video, and propose a vehicle occupancy detection algorithm that complements the object-ident model's problems.

• Geomechanics and Engineering
• /
• v.24 no.5
• /
• pp.407-418
• /
• 2021

Due to the complexity of the causes of the sliding mass instabilities, landslide susceptibility and hazard evaluation are difficult, but they can be more carefully considered and regionally evaluated by using new programming technologies to minimize the hazard. This study aims to evaluate the landslide hazard zonation in the Tabriz region, Iran. A fuzzy logic-based multi-criteria decision-making method was proposed for susceptibility analysis and preparing the hazard zonation maps implemented in MATLAB programming language and Geographic Information System (GIS) environment. In this study, five main factors have been identified as triggering including climate (i.e., precipitation, temperature), geomorphology (i.e., slope gradient, slope aspect, land cover), tectonic and seismic parameters (i.e., tectonic lineament congestion, distribution of earthquakes, the unsafe radius of main faults, seismicity), geological and hydrological conditions (i.e., drainage patterns, hydraulic gradient, groundwater table depth, weathered geo-materials), and human activities (i.e., distance to roads, distance to the municipal areas) in the study area. The results of analyses are presented as a landslide hazard map which is classified into 5 different sensitive categories (i.e., insignificant to very high potential). Then, landslide susceptibility maps were prepared for the Tabriz region, which is categorized in a high-sensitive area located in the northern parts of the area. Based on these maps, the Bozgoosh-Sahand mountainous belt, Misho-Miro Mountains and western highlands of Jolfa have been delineated as risk-able zones.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.16 no.9
• /
• pp.3138-3151
• /
• 2022

Traffic safety and congestion are becoming more and more serious, especially the frequent occurrence of traffic accidents, which have caused great casualties and economic losses. Cellular Vehicle to Everything (C-V2X) can assist in safe driving and improve traffic efficiency through real-time information sharing and communication between vehicles. All vehicles communicate directly with Base Stations (BS), which will increase the base station load. And when the communicating vehicles are too far apart, too fast or there are obstacles in the communication path, the communication link can be unstable or even interrupted. Therefore, choosing an effective and reliable multi-hop relay-assisted Vehicle to Vehicle (V2V) communication can not only reduce the base station load and improve the system throughput but also expand the base station coverage and improve the communication quality of edge vehicles. Therefore, a communication area division scheme based on regular hexagon segmentation technology is proposed, a relay-assisted V2V communication mechanism is designed for the divided communication areas, and an efficient communication link is constructed by selecting the best relay node. Simulation results show that the scheme can improve the throughput of the system by nearly 55% and enhance the robustness of the V2V communication link.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.22 no.3
• /
• pp.15-24
• /
• 2022

At present, there are few studies on signal control of pedestrian traffic flow and non-motor traffic flow at intersections. Research on the optimization scheme of mixed traffic flow signal control can coordinate and control the overall traffic flow of pedestrians, non-motor vehicles and motor vehicles, which is of great significance to improve the congestion at intersections. For the traffic optimization of intersections, this paper starts from two aspects: channelization optimization and phase design, and reduces the number of conflict points at intersections from spatial and temporal right-of-way allocation respectively. Taking the classical signal timing method as the theoretical basis, and aiming at ensuring the safety and time benefit of traffic travelers, a channelization optimization and signal control scheme of the intersection is proposed. The channelization and phase design methods of intersections with motor vehicles, non-motor vehicles and pedestrians as objects are discussed, and measures to improve the channelization optimization of intersections are proposed. A multi-objective optimization model of intersection signal control was established, and the model was solved based on NSGA-II algorithm.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.30 no.4D
• /
• pp.403-411
• /
• 2010

Nowadays, Light railway system is attracted public attention as solution for metropolitan traffic congestion. But it is difficult to decide an appropriate light railway system. It is especially hard in the Seoul metropolitan to decide an appropriate system, because there are many factors that must considered. So we research application status of light railway system that is scheduled or promoted in the Korea and the foreign nations. And we selected systems by types of city. In this paper, we divided into 6 types of city through factor analysis and cluster. And we considered various factor such as technology, transportation, environment etc that used previous research and feasibility study. To determine the priority among the factors, AHP(Analytic Hierarchy Process) was applied as a method for multi-standard decision method.