• 한국통신학회논문지
• /
• 제30권3C호
• /
• pp.69-76
• /
• 2005

본 논문에서는 다중 부호 신호 (MC: multi-code signal)를 정 진폭으로 전송하는 정 진폭 이진 직교 다중 부호 변조 방식 (CABM: constant-amplitude biorthogonal multi-code modulation)을 제안한다. 정 진폭을 유지하기 위해 제안된 CABM 방식에서는 잉여 비트를 사용하여 신호를 부호화 하였다. 제안된 CABM 변조 방식은 매우 높은 스펙트럼 효율을 지원할 수 있다. 또한 본 논문에서는 제안된 CABM 신호를 복조하기 위한 다양한 복조 방식들을 제시하고 기존의 정 진폭 직교 변조 방식 (CAOM: Constant-amplitude orthogonal multi-code modulation)과 그 성능을 비교한다. 제안된 CABM 변/복조 방식은 고속 데이터 율을 제공해야 하는 디지털 무선 통신 시스템으로 사용될 수 있다.

• 제어로봇시스템학회논문지
• /
• 제17권2호
• /
• pp.149-156
• /
• 2011

This paper reveals a distance estimation algorithm based on multi-code ultrasonic and wireless sensor network. For measuring the distances among the sensor nodes, each ultrasonic transmitter transmits multi-code ultrasonic signal simultaneously. Receivers use cross correlation method to separate the coded signals. The information of measured distances is broadcasted to each sensor node by wireless sensor network. The wireless sensor network measures the distance among the sensor nodes using the received signal strength of the broadcasting. The multi-code ultrasonic have a limitation of measurable distance. And the received signal strength is affected from an environment. This paper measures a distance using ultrasonic and a received signal strength in short range. These measured data are applied to the least square estimation algorithm. By the expansion of the fitting curve, a distance measurement in long range using the received signal strength is compensated. The coupled system reduce the error to an acceptable level.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 ICEIC The International Conference on Electronics Informations and Communications
• /
• pp.27-30
• /
• 2004

OFDMA is considered as one of the major candidates for broadband wireless access. The OFDMA signal is usually coherently demodulated, requiring the channel estimation which can be estimated using a known pilot signal. In multi-cell environment, the performance of channel estimation is mainly limited by intercell interference. It is desirable to use a pilot signal that can estimate the channel information robust to the intercell interference in the OFDMA uplink system. In this paper, we consider two types of pilot signal applicable to multi-cell OFDMA uplink systems: One is time-multiplexed pilot signal and the other is code­multiplexed pilot signal. Simulation results show that the code-multiplexed pilot is suitable for low mobility environment and time-multiplexed pilot is suitable for high mobility environment.

• 한국통신학회논문지
• /
• 제24권10A호
• /
• pp.1494-1500
• /
• 1999

다양한 데이터 전송속도가 혼합된 고속의 멀티미디어 서비스를 제공하기 위해 Multi-Code CDMA (Code Division Multiple Access) 전송 방식이 제안되고 있다. 이 전송방식은 고속의 데이터를 N개의 병렬 저속 데이터 흐름으로 바꾸고, 서로 구별 가능한 PN코드로 확산 후 합하여 발생하는 multi level 신호를 전송한다. 이 multi-level신호는 역방향 link상에서 이동국 송신 출력이 커짐에 따라 인접 서비스 구역에 미치는 간섭양이 증대되는 문제점이 발생한다. 따라서 이러한 문제점을 해결할 수 있는 M/B 변환부(multi level to binary level conversion)를 이용하여 multi level의 신호를 binary level 신호로 바꾸어 전송하는 Multi-Code CDMA 전송방식을 제안하고, M/B를 사용한 MC-CDMA 전송방식과 M/B를 사용하지 않은 MC/CDMA 전송방식의 성능을 비교하였다.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 추계종합학술대회 논문집(1)
• /
• pp.245-248
• /
• 2000

In this paper, we present the performance of a multi-code parallel combinatory CDMA system using bi-orthogonal modulation under multipath fading channel. In general, the dynamic range of the amplitude of the transmit signal is very large in conventional multi-code CDMA systems, resulting in severe nonlinear distortion due to high power amplifier and thus significant BER performance degradation. Since the number of simultaneously multiplexed code channels in the proposed system is reduced, the proposed system exhibits reduction of peak-to-average power ratio (PAPR) of the transmit signal amplitude with significant BER improvement. We verify the performance of the proposed system by computer simulations under the Vehicular B multipath fading channel model by ARIB.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2002년도 하계종합학술대회 논문집(1)
• /
• pp.13-16
• /
• 2002

In this paper, we propose adaptive despreading receiver for multi-code PW-CDMA system with binary-level clipping. The distortion due to clipping the multi-level signal causes the performance degradation. Adaptive despreading alleviates the effect of clipping. It is shown that the proposed adaptive despreading receiver achieves smaller BER than conventional despreading receiver for multi-code PW-CDMA system with binary-level clipping.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 제13회 신호처리 합동 학술대회 논문집
• /
• pp.951-954
• /
• 2000

In this paper, we present a multi-code parallel combinatory CDMA system using bi-orthogonal modulation to reduce envelope variation and improve bit error. .rate (BER) performance. In general, the dynamic range of the amplitude of the transmit signal is very large in the case of conventional multi-code CDMA systems, resulting in severe nonlinear distortion due to high power amplifier and thus significant BER performance degradation. The proposed system exhibits reduction of peak-to-average power ratio (PAPR) of the transmit signal amplitudes and significant performance improvement. We verify the performance of the proposed system by computer simulations under AWGN channel and flat fading channel.

• 한국정보기술응용학회:학술대회논문집
• /
• 한국정보기술응용학회 2005년도 6th 2005 International Conference on Computers, Communications and System
• /
• pp.335-338
• /
• 2005

In this paper, we propose a downlink power control scheme to apply in the unequal error protection multi-code CDMA mobile medicine system. The mobile medicine system contains (i) blood pressure and body temperature measurement value, (ii) ECG medical signals measured by the electrocardiogram device, (iii) mobile patient's history, (iv) G.729 audio signal, MPEG-4 CCD sensor video signal, and JPEG2000 medical image. By the help of the multi-code CDMA spread spectrum communication system with downlink power control scheme and unequal error protection strategy, it is possible to transmit mobile medicine media and meet the quality of service. Numerical analysis and simulation results show that the system is a well transmission platform in mobile medicine.

• ETRI Journal
• /
• 제29권6호
• /
• pp.835-837
• /
• 2007

A multi-bit sigma-delta modulator architecture is described for low-distortion performance and a high-speed operation. The proposed architecture uses both a delayed code and a delayed differential code of analog-to-digital converter in the feedback path, thereby suppressing signal components in the integrators and relaxing the timing requirement of the analog-to-digital converter and the scrambler logic. Implemented by a 0.13 ${\mu}m$ CMOS process, the sigma-delta modulator achieves high linearity. The measured spurious-free dynamic range is 89.1 dB for -6 dBFS input signal.

• 전자공학회논문지C
• /
• 제34C권4호
• /
• pp.26-35
• /
• 1997

This paper proposes a multi-bit $\Sigma\Delta$ modulator arcitecture which eliminates signal clipping problem. To avoid signal clipping, the output values of intgrators are monitored and modified by a reference value. This oepration is recorded as a digital code to restore actual signal value. Due to the digital code, the substraction of feedback value from the multi-bit quantizer can be calculated by a digital adder and this simplifies dAC operation making the accurate DAC of conventional multi-bit $\Sigma\Delta$ modulator scheme unnecessary. These features make N-th modulator can be implemented by sharing an integrator among N stages to decrease the required chip area. As an experimental example, a 4th order .sum..DELTA. modulator with oversampling ratio of 64 was simulated to show over 130 DB SNR at rail-to-rail input sinusoidal signal.