• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2005.11a
• /
• pp.125-130
• /
• 2005

This paper suggests an efficient method of protection ratio calculation and shows some calculated results applicable to frequency coordination in microwave relay system networks, and the net filter discrimination (NFD) associated with Tx spectrum mask and overall Rx filter characteristics has been examined to obtain the adjacent channel protection ratio. The protection ratio comprises several factors such as C/N of modulation scheme, noise-to-interference ratio, multiple interference allowance, fade margins of multi-path and rain attenuation, and NFD. According to computed results for 6.7 GHz, 64-QAM, and 60 km at BER $10^{-6}$, fade margin and co-channel protection ratio are 41.1 and 75.2 dB, respectively, In addition, NFD for channel bandwidth of 40 MHz reveals 28.9 dB at the first adjacent channel, which results in adjacent channel protection ratio of 46.3 dB. The proposed method provides some merits of an easy calculation, systematic extension, and applying the same concept to frequency coordination in millimeter wave relay system networks.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.1C
• /
• pp.45-54
• /
• 2010

This paper studies the design of a multiuser multiple-input multiple-output (MIMO) system, where a base station (BS) transmits independent messages to multiple users. The remarkable "dirty paper coding (DPC)" result was first presented by Costa that the capacity does not change if the Gaussian interference is known at the transmitter noncausally. While several implementable DPC schemes have been proposed recently for single-user dirty-paper channels, DPC is still difficult to implement directly in practical multiuser MIMO channels. In this paper, we propose a network channel matrix triangulation (NMT) algorithm for utilizing interference known at the transmitter. The NMT algorithm decomposes a multiuser MIMO channel into a set of parallel, single-input single-output dirty-paper subchannels and then successively employs the DPC to each subchannel. This approach allows us to extend practical single-user DPC techniques to multiuser MIMO downlink cases. We present the sum rate analysis for the proposed scheme. Simulation results show that the proposed schemes approach the sum rate capacity of the multiuser MIMO downlink at moderate signal-to-noise ratio (SNR) values.

• Proceedings of the KIEE Conference
• /
• 1987.07b
• /
• pp.869-873
• /
• 1987

In this study, we have examined the multi-level QPRS system in point of error rate, which requires narrow bandwidth and has Little ISI. The generalized error rate equations of multi-level QPRS signal have been derived in the presence of Gaussian noise and co-channel CW interference. And the error rate performance of 9, 49, 225 QPRS system is investigated as parameters of carrier power-to-noise power, carrier power-to -interference power. Also, we have investigated the effect of carrier offset.

• Proceedings of the IEEK Conference
• /
• 2005.11a
• /
• pp.241-244
• /
• 2005

In this paper, we construct UWB system formed by MIMO(Multi-input Multi-output) antennas using indoor WPAN(Wireless Personal Area Network) channel modeling and analyze the interference among these channels.

• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.43-46
• /
• 1998

The performance of a receiver that empolys a multi-stage inter-ference cancellation scheme for uplink fading channel is analyzed when there is carrier frequency offset. And the conditions to permit the performance improvement are analytically obtained. Numerical results show the effectiveness of the proposed system under Rayleigh fading channel assuming that carrier frequency offset is present.

• Journal of The Institute of Information and Telecommunication Facilities Engineering
• /
• v.2 no.3
• /
• pp.17-23
• /
• 2003

Turbo decoding in combination with detection strategy for Multi Access Interference (MAI) cancellation has been shown to be very effective for MC-CDMA system in Rayleigh multi-path fading environment. This paper reports new simulation results on the efficacy of joint decoding and detection for MC-CDMA in nonlinear and fading channel.

• International Journal of Computer Science & Network Security
• /
• v.23 no.6
• /
• pp.27-34
• /
• 2023

This paper proposed an Inter-Carrier-Interference (ICI) Canceling Orthogonal Frequency Division Multiplexing (OFDM) receiver for 5G mobile system to support 500 km/h linear motor high speed terrestrial transportation service. A receiver in such high-speed train sees the transmission channel which is composed of multiple Doppler-shifted propagation paths. Then, a loss of sub-carrier orthogonality due to Doppler-spread channels causes ICI. The ICI Canceler is realized by the following three steps. First, using the Demodulation Reference Symbol (DMRS) pilot signals, it analyzes three parameters such as attenuation, relative delay, and Doppler-shift of each multi-path component. Secondly, based on the sets of three parameters, Channel Transfer Function (CTF) of sender sub-carrier number 𝒏 to receiver sub-carrier number 𝒍 is generated. In case of 𝒏≠𝒍, the CTF corresponds to ICI factor. Thirdly, since ICI factor is obtained, by applying ICI reverse operation by Multi-Tap Equalizer, ICI canceling can be realized. ICI canceling performance has been simulated assuming severe channel condition such as 500 km/h, 2 path reverse Doppler Shift for QPSK, 16QAM, 64QAM and 256QAM modulations. In particular, for modulation schemes below 16QAM, we confirmed that the difference between BER in a 2 path reverse Doppler shift environment and stationary environment at a moving speed of 500 km/h was very small when the number of taps in the multi-tap equalizer was set to 31 taps or more. We also confirmed that the BER performance in high-speed mobile communications for multi-level modulation schemes above 64QAM is dramatically improved by the use of a multi-tap equalizer.

• Geosystem Engineering
• /
• v.21 no.5
• /
• pp.251-261
• /
• 2018

With the urbanization in recent years, the power line interference noise in electromagnetic signal is increasing day by day, and has gradually become an unavoidable component of noises in magnetotelluric signal detection. Therefore, a kind of power line interference noise elimination method based on independent component analysis in wavelet domain for magnetotelluric signal is put forward in this paper. The method first uses wavelet decomposition to change single-channel signal into multi-channel signal, and then takes advantage of blind source separation principle of independent component analysis to eliminate power line interference noise. There is no need to choose the layer number of wavelet decomposition and the wavelet base of wavelet decomposition according to the observed signal. On the treatment effect, it is better than the previous power line interference removal method based on independent component analysis. Through the de-noising processing to actual magnetotelluric measuring data, it is shown that this method makes both the apparent resistivity curve near 50 Hz and the phase curve near 50 Hz become smoother and steadier than before processing, i.e., it effectively eliminates the power line interference noise.

• The Journal of the Korea Contents Association
• /
• v.18 no.3
• /
• pp.611-625
• /
• 2018

With innovative advances in wireless communication technology, many researches for extending network lifetime in maximum by using energy harvesting have been actively performed on the area of network resource optimization, QoS-guaranteed transmission, energy-intelligent routing and etc. As known well, it is very hard to guarantee end-to-end network delay due to uncertainty of the amount of harvested energy in multi-hop RF(radio frequency) energy harvesting wireless networks. To minimize end-to-end delay in multi-hop RF energy harvesting networks, this paper proposes an energy efficient routing metric based on interference aware and protocol which takes account of various delays caused by co-channel interference, energy harvesting time and queuing in a relay node. The proposed method maximizes end-to-end throughput by performing avoidance of packet congestion causing load unbalance, reduction of waiting time due to exhaustion of energy and restraint of delay time from co-channel interference. Finally simulation results using ns-3 simulator show that the proposed method outperforms existing methods in respect of throughput, end-to-end delay and energy consumption.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.21 no.11
• /
• pp.2923-2931
• /
• 1996

In this paper, the symbol error probability for orthogonal frequency division multiplexing (OFDM) in the multipath fading environment is obtained analytically. In the analysis, OFDM signals with and without the guard interval are considered, and the two-ray fading model is used for the multi-path fading channel. From the analysis results, it is found that the adjacent subchannel interfernce increases the symbol error rate when the guard interval is not employed or shorter than the length of the delay. It is also shown that the adjacent subchannel interference is a Gaussian random variable and its variance depends on the subchannel location and the number of subchannels. Finally, it is found that the variance of the subchannel interference also increases as the power of the signal increases for the OFDM with insufficient guard interval, yieldin an irreducible error at high signal to noise ratio.