• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.15 no.1
• /
• pp.257-263
• /
• 2011

Recently as AR(Augmented Reality) is focus of attention, AR is applied to various fields and is expected its valuable use. In this paper, we implemented the system based on Goblin XNA which supports high resolution model file and higher AR. We confirmed the relation of model output among the number of marker, the location and changes of camera distance. And we produced the infantile studying contents using AR and embodied. In implemented contents, we showed the familiar character to infants on each page marker. As the result of it, we can raise their concentration and at a time studying supporters can use the contents easily as well. Also we put 3 marker on each page of contents to recognize it smoothly in case one part of it is hidden by any obstacle. Finally we maximized the learning effect such as presence and immersion in studying through reinforcing 3D models according to the every situation.

• Journal of Information Technology Applications and Management
• /
• v.14 no.4
• /
• pp.159-174
• /
• 2007

The purpose of this research is to investigate the relationships among the perceived satisfaction, the perceived the trust, the commitment, the key features for mobile phone, the brand image, the switching cost and the repurchasing intention. We also examine the differences between Korean and Indonesian markets concerning the relationships of these key successfactors. The structural model is tested with the data form each of the sub-samples (i. e. Korean and Indonesian users taken separately). Properties of the casual paths, including standardized path coefficients, the significance of difference, and variance explained for trust, satisfaction, commitment and repurchasing in the hypothesized model, are presented. This study indicated that hardware (sound quality, LCD display, design) user interface (GUI, Menu, Key pad) and extra functions (camera phone, wireless internet, MP3 player) are the three important factors effecting the trust and the satisfaction. The proposed model has been newly tested from the technological prospective in order to get the more practical result. Following the model test, we conduct a test of the differences in path coefficients between Korean and Indonesian users. MSEM show that, compared to Korean market, Indonesian had more emphasized on extra-function for the mobile phone as well as giving more influence to the satisfaction from the brand image. It means Korean market consider the extra-function as basic or no-premium points. And the satisfaction has been effected by switching-cost in Korea but the trust in Indonesia. Other interesting result from the structural weight invariance indicate that, compared to Korean market, the brand-image has effected the satisfaction in addition to placing more the trust on determining the commitment in Indonesia.

• Journal of Korea Society of Industrial Information Systems
• /
• v.21 no.1
• /
• pp.35-42
• /
• 2016

Various events of stop, playback, capture, and zoom-in/out in playing video is available in the monitor of a small size such as smart phones. However, if the size of the display increases, then the cost of the touch recognition is increased, thus provision of a touch event is not possible in practice. In this paper, we propose a video event control system that recognizes a touch inexpensively from the depth information, then provides the variety of events of the toggle, the pinch-in / out by the single or multi-touch. The proposed method finds a touch location and the touch path by the depth information from a depth camera, and determines the touch gesture type. This touch interface algorithm is implemented in a small single-board system, and can control the video event by sending the gesture information through the UART communication. Simulation results show that the proposed depth touch method can control the various events in a large screen.

• Publications of The Korean Astronomical Society
• /
• v.22 no.4
• /
• pp.201-209
• /
• 2007

We have preliminarily designed two infrared optical systems of the multi-purpose infrared camera system (MIRIS) which is the main payload of STSAT-3. Each optical system consists of a Cassegrain telescope, a field lens and a 1:1 re-imaging lens system that is essential for providing a cold stop. The Cassegrain telescope is identical for both of two infrared cameras, but the field correction lens and re-imaging lens system are different from each other because of different bands of wavelength. The effective aperture size is 100mm in diameter and the focal ratio is f/5. The total length of the optical system is 300mm and the position of the cold stop is 25mm from the detector focal plane. The RMS spot size is smaller than $40{\mu}m$ over the whole detector plane.

• The Bulletin of The Korean Astronomical Society
• /
• v.39 no.1
• /
• pp.50.1-50.1
• /
• 2014

The Multi-purpose InfraRed Imaging System (MIRIS) is the main payload of Science and Technology Satellite 3 (STSAT-3), which was launched onboard Dnepr rocket from Russian Yasny Launch Base in November 2013. The MIRIS is an infrared (IR) camera, and the telescope has to be cooled down to below 200K in order to reduce thermal background noise. For the effective cooling and low-power consumption, we applied passive cooling method to the thermal design of the MIRIS. We also conducted thermal analysis and tested for the passive cooling before the launch of STSAT-3. After the launch, we have received State-of-Health (SOH) data from the satellite on orbit, including temperature monitoring results. It is important that the temperature of the telescope was shown to be cooled down to below 200K. In this paper, we present both the temperature data of the MIRIS on orbit and the thermal analysis results in the laboratory. We also compare these results and discuss the verification of the passive cooling.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2018.10a
• /
• pp.396-399
• /
• 2018

In this paper, we propose a motion recognition system for identification and interaction with simulator used in the realistic biathlon simulator. The proposed system tried to improve the motions data which is obstructed by the obstacles or overlapping joints and the motion due to the fast motion in the process of recognizing the various motion patterns in the biathlon. In this paper, we constructed a multi-camera motion recognition system based on IoT devices, and then we applied a skeletal area interpolation method for normal motion identification. We designed a system that can increase the recognition rate of motion from the biathlon. The proposed system can be applied to the analysis of snow sports motion and it will be used to develop realistic biathlon simulator system.

• Steel and Composite Structures
• /
• v.23 no.6
• /
• pp.727-736
• /
• 2017

The application of carbon fiber reinforced polymer (CFRP) in steel structures primarily includes two categories, i.e., the bond-critical application and the contact-critical application. Debonding failure and buckling failure are the main failure modes for these two applications. Conventional electrometric techniques may not provide precise results because of the limitations associated with single-point contact measurements. A nondestructive full-field measurement technique is a valuable alternative to conventional methods. In this study, the digital image correlation (DIC) technique was adopted to investigate the bond behavior and buckling behavior of CFRP-steel composite members. The CFRP-to-steel bonded joint and the CFRP-strengthened square hollow section (SHS) steel column were tested to verify the suitability of the DIC technique. The stereo-DIC technique was utilized to measure continuous deformation. The bond-slip relationship of the CFRP-to-steel interface was derived using the DIC data. Additionally, a multi-camera DIC system consisting of four stereo-DIC subsystems was proposed and applied to the compressive test of CFRP-strengthened SHS steel column. The precise buckling location and CFRP delamination of the CFRP-strengthened SHS steel column were identified. The experimental results confirm that the stereo-DIC technique can provide effective measurements for investigating the behaviors of CFRP-steel composite members.

• The Journal of Natural Sciences
• /
• v.5 no.1
• /
• pp.87-93
• /
• 1992

A robotically assisted field material handling system designed for loading and unloading of a planar pallet with a forklift in unstructured field environment is presented. The system uses combined acoustic/visual sensing data to define the position/orientation of the pallet and to determine the specific locations of the two slots of the pallet, so that the forklift can move close to the slot and engage it for transport. In order to reduce the complexity of the material handling operation, we have developed a method based on the integration of 2-D range data of Poraloid ultrasonic sensor along with 2-D visual data of an optical camera. Data obtained from the two separate sources complements each other and is used in an efficient algorithm to control this robotically assisted field material handling system . Range data obtained from two linear scannings is used to determine the pan and tilt angles of a pallet using least mean square method. Then 2-D visual data is used to determine the swing angle and engagement location of a pallet by using edge detection and Hough transform techniques. The limitations of the pan and tilt orientation to be determined arc discussed. The system developed is evaluated through the hardware and software implementation. The experimental results are presented.

• Journal of the Korean Solar Energy Society
• /
• v.33 no.5
• /
• pp.51-59
• /
• 2013

It is usual to evaluate the performance of the cool roof by measuring in-site rooftop temperature using thermal infra-red camera. The principal advantage of rooftop thermal infrared image acquired in oblique vantage point of super high-rise building as a remote sensor is to provide, in a cost-effective manner, area-wide information required for a scattered rooftop target with different colors, utilizing wide view angle and multi-temporal data coverage. This research idea was formulated by incorporating the concept of traditional remote sensing into rooftop temperature monitoring. Correlations between infrared image of super high-rise building and in-situ data were investigated to compare rooftop surface temperature for a total of four different rooftop locations. The results of the correlations analyses indicate that the rooftop surface temperature by the infrared images of super high-rise building alone could be explained yielding $R^2$ values of 0.951. The visible permanent record of the oblique thermal infra-red image was quite useful in better understanding the nature and extent of rooftop color that occurs in sampling points. This thermal infrared image acquired in oblique vantage point of super high-rise made it possible to identify area wide patterns of rooftop temperature change subject to many different colors, which cannot be acquired by traditional in-site field sampling. The infrared image of super high-rise building breaks down the usual concept of field sampling established as a conventional cool roof performance evaluation technique.

• Journal of Institute of Control, Robotics and Systems
• /
• v.15 no.2
• /
• pp.211-217
• /
• 2009

This paper proposes a way of expanding the use area of localization technique by using a beacon. In other words, we have developed the auto-calibration algorithm that recognizes the location of this beacon by attaching the beacon on an arbitrary position and by using the information of existing beacon under this situation. By doing so, the moving robot can overcome the limitation that the localization of moving robot is only possible within the area that has installed the existing beacon since the beacon cannot be installed on the accurate location when passing through a danger zone or an unknown zone. Accordingly, the moving robot can slowly move to the unknown zone according to this auto-calibration algorithm and can recognize its own location at a later time in a safe zone. The localization technique is essentially needed in using a moving robot and it is necessary to guarantee certain degree of reliability. Generally, moving robots are designed in a way to work well under the situation that the surroundings is well arranged and the localization techniques of using camera, laser and beacon are well developed. However due to the characteristics of sensor, there may be the cases that the place is dark, interfering radio waves, and/or difficult to install a beacon. The effectiveness of the method proposed in this paper has been proved through an experiment in this paper.