• Journal of Advanced Navigation Technology
• /
• v.12 no.3
• /
• pp.220-226
• /
• 2008

This paper proposes the Reconfigurable Doherty Amplifier(RDA) with asymmetric structure which has ${\lambda}/4$ impedance transformer for modulating the load impedance in peaking amplifier path. This structure is possible to implement a compact size for N-stage multi Doherty amplifier and to get almost same characteristics that is compared to conventional Doherty amplifier. To realize the high efficiency amplifier, we were implemented 45 Watts power amplifier at transmitter band of Wideband Code Division Multiple Access(WCDMA) base-station. As a result, in case of WCDMA 1 Frequency Allocation(FA) input signals, this amplifier has obtained a 26.3% Power Added Efficiency(PAE) at 8 dB back-off point from P1dB and an Adjacent Channel Leakage Power(ACLR) is -40.4 dBc at center frequency ${\pm}5MHz$ deviation.

• Journal of Chest Surgery
• /
• v.49 no.6
• /
• pp.435-442
• /
• 2016

Background: Blunt traumatic cardiac rupture is rare. However, such cardiac ruptures carry a high mortality rate. This study reviews our experience treating blunt traumatic cardiac rupture. Methods: This retrospective study included 21 patients who experienced blunt traumatic cardiac rupture from 1999 to 2015. Every patient underwent surgery. Several variables were compared between survivors and fatalities. Results: Sixteen of the 21 patients survived, and 5 (24%) died. No instances of intraoperative mortality occurred. The most common cause of injury was a traffic accident (81%). The right atrium was the most common location of injury (43%). Ten of the 21 patients were suspected to have cardiac tamponade. Significant differences were found in preoperative creatine kinase-myocardial band (CK-MB) levels (p=0.042) and platelet counts (p=0.004) between the survivors and fatalities. The patients who died had higher preoperative Glasgow Coma Scale scores (p=0.007), worse Trauma and Injury Severity Scores (p=0.007), and higher Injury Severity Scores (p=0.004) than those who survived. Conclusion: We found that elevated CK-MB levels, a low platelet count, and multi-organ traumatic injury were prognostic factors predicting poor outcomes of blunt cardiac rupture. If a patient with blunt traumatic cardiac rupture has these factors, clinicians should be especially attentive and respond promptly in order to save the patient's life.

• Journal of Biomedical Engineering Research
• /
• v.28 no.3
• /
• pp.429-440
• /
• 2007

A coded excitation has been studied to improve the performance for ultrasound imaging in term of SNR, imaging frame rate, contrast to tissue ratio, and so forth. However, it requires a complicated arbitrary waveform transmitter for each active channel that is typically composed of a multi-bit Digital-to-Analog Converter (DAC) and a linear power amplifier (LPA). Not only does the LPA increase the cost and size of a transmitter block, but it consumes much power, increasing the system complexity further and causing a heating-up problem. This paper proposes an optimized 1.5bit fourth order sigma-delta modulation technique applicable to design an efficient arbitrary waveform generator with greatly reduced power dissipation and hardware. The proposed SDM can provide a required SQNR with a low over-sampling ratio of 4. To this end, the loop coefficients are optimized to minimize the quantization noise power in signal band while maintaining system stability. In addition, the decision level for the 1.5 bit quantizer is optimized for a given input waveform, which results in the SQNR improvement of more than 5dB. Computer simulation results show that the SQNR of a FM(frequency modulated) signal generated by using the proposed method is about 26dB, and the peak side-lobe level (PSL) of its compressed waveform on receive is -48dB.

• Journal of Satellite, Information and Communications
• /
• v.1 no.2
• /
• pp.16-24
• /
• 2006

As a multi-mission GEO satellite, COMS system is being developed jointly by KARI, ETRI, KORDI, KMA, and industries from both abroad and domestic. EADS ASRTIUM is the prime contractor for manufacturing the COMS. ETRI is developing the COMS Ka-band payload and SGCS with the fund from MIC. COMS Satellite Ground Control System (SGCS) will be the only system for monitor and control of the satellite in orbit. In order to fulfill the mission operations of the three payloads and spacecraft bus, COMS SGCS performs telemetry reception and processing, satellite tracking and ranging, command generation and transmission, satellite mission planning, flight dynamics operations, and satellite simulation, By the proper functional allocations, COMS SGCS is divided into five subsystems such as TTC, ROS, MPS, FDS, and CSS. In this paper, functional design of the COMS SGCS is described as five subsystems and the interfaces among the subsystems.

• Structural Monitoring and Maintenance
• /
• v.5 no.2
• /
• pp.297-311
• /
• 2018

Plate and shell structure is widely applied in engineering, i.e. building roofs, aircraft wings, ship platforms, and satellite solar arrays. Its vibration problem has become increasingly prominent due to the tendency of lightening, upsizing and flexibility. As a new smart material with great actuating force and toughness, macro-fiber composite (MFC) is composed of piezoelectric fiber and epoxy resin basal body, which can be directly pasted onto the surface of plate and shell and is suitable for vibration control. This paper deduces the actuation equation of MFC coupled plate in different boundary conditions, an equivalent finite element modeling method is proposed which uses MFC actuating force as the applied excitation, and on this basis the active control simulation and experiment of MFC over plate and shell structure vibration are accomplished. The results indicate that MFC is able to implement effective control over plate and shell structure vibration in multi-band range. The comparison between experiment and simulation proves that the actuation equation deduced herein, effective and practicable, can be applied into the simulation calculation of MFC vibration control over plate and shell structure.

• Journal of Satellite, Information and Communications
• /
• v.12 no.1
• /
• pp.6-12
• /
• 2017

Recently, the demand for SAR imaging is growing to monitor natural disasters or military sites to foresee topographic changes, where optical sensing is not easily available. High-resolution SAR images are useful in exploring topography and monitoring artificial land objects in all weather conditions. In this paper,high resolution SAR images acquired from KOMPSAT-5 are exploited for the applications of change detection and classification. In order to detect change areas, amplitude change detection (ACD) and coherence change detection (CCD) algorithms are employed and their performances are compared in practical applications. For enhanced performance, the potential of small scaled change detection is explored by combining multi-temporary SAR images. The k-means and SVM methods are applied for land classifications and their performances are compared by applying to the real spaceborne SAR images.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.20 no.12
• /
• pp.2417-2424
• /
• 2016

Small size and light weight is very important for components used in radar mounted platform such as airborne radar. Recently, the active phased array radar is developed as an array of antennas for thousands of transmit/receive modules to be used as a multi-function radar that can detect and track targets. In this case, the size and weight of the transmit/receive modules are critical factor for developing the radar. In this paper, we developed a compact transmit/receive module using the 10W RF MEMS switch domestically localizing and reduced the circuit area to about 86.5% compared to using a circulator. The developed module satisfies not only electrical requirements but also MIL-STD's environmental specifications. So it can be used in a military device. It can be used at adaptive tunable receivers, reconfigurable smart active antennas and wide band beam electrical steering antennas.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.2A
• /
• pp.201-206
• /
• 2006

A SPST Switch MMIC which used for Microwave Switch Matrix(MSM) of communications satellite payload with multi-beam function has been designed and fabricated. New RE FET switch configuration has been devised to improve power characteristics and isolation. Input and output return losses are better than another switches reported previously for both On and Off states. The MMIC chips were fabricated in 0.15um GaAs pHEMT process and measured insertion loss less than 2.0dB and isolation more than 63dB in the frequency range of 3GHz$\∼$4GHz. Output 3rd order interceptpoint above 32dBm has been recorded and the value is very high even though the unit pHEMT has gate width of 0.2mm and only four pHEMT are used in the MMTC.

• Journal of KIISE:Information Networking
• /
• v.37 no.3
• /
• pp.217-227
• /
• 2010

To apply active RFID technology in the various kinds of industry, it needs to quickly transmit a large amount of data. ISO/IEC 18000-7 standard uses the 433.92MHz as single channel system and its transmit rate is just 27.8kbps, that is insufficient for a large amount of data transmission. To solve this problem, we designed a new data transmission protocol using 2.4GHz band. The feature of designed protocol is not only making over 255bytes data messages using the Burst Read UDB but also efficiently transmitting it. To implement this protocol, we use Texas Instruments's SmartRF04 develop kit and CC2500 transceiver as RF module. As an evaluation of 63.75kbytes data transmission, we demonstrate that transmission time of Burst Read UDB has improved as 17.95% faster than that of Read UDB in the ISO/IEC 18000-7.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.959-962
• /
• 2006

Public education is undoubtedly a very important aspect for a country to develop space program. People have the rights to understand how the tax they paid is being used. This paper addresses the effectiveness of FORMOSAT-2 on public education in Taiwan. As the first remote sensing satellite of the National Space Organization (NSPO) of Taiwan, FORMOSAT-2 is a small satellite of 746 kg mass for two remote sensing missions: Earth and upward lightning observations. The mission orbit is sun-synchronous of 888 km altitude for exactly 14 revolutions per day. For earth observation, the payload is an advanced high resolution remote sensing instrument (RSI) with ground sampling distance (GSD) 2 m in panchromatic (PAN) band and 8 m in four multi-spectral (MS) bands. For upward lightning observation, the payload is an imager of sprites and upper atmospheric lightning (ISUAL). After more than two years of Earth observation started in June 2004, the effectiveness of FORMOSAT-2 images on public education in Taiwan is very promised. Five domestic universities and one private company in Taiwan have signed contracts respectively with NSPO to take the roles of satellite image investigator and distributor. A private company has signed contract with NSPO to generate and provide URMAP (= your map) in its website for general public applications by using FORMOSAT-2 images. The Newtonkids Book Company used FORMOSAT-2 images to publish a kind of calendar for children education purpose. Besides, a science team in National Cheng Kung University (NCKU) is doing the research work on the 3820 (up to 30 June 2006) transient luminous events (TLEs) observed by FORMOSAT-2.