• 제목/요약/키워드: multi-axle loads

검색결과 10건 처리시간 0.031초

변환영역 해석법을 통한 콘크리트 도로 포장의 다축 차량 하중에 대한 응력 분포 분석 (Stress Distribution in Concrete Pavements under Multi-Axle Vehicle Loads Obtained Using Transformed Field Domain Analysis)

  • 김성민;심재수;박희범
    • 콘크리트학회논문집
    • /
    • 제18권5호
    • /
    • pp.695-702
    • /
    • 2006
  • 본 연구는 콘크리트 포장에 복륜 단축, 복륜 복축, 복륜 삼축 등 복륜 다축 차량 하중이 작용할 때 포장의 응력 분포와 최대 응력을 변환영역에서의 해석법을 이용하여 분석하였다. 우선 변환영역에서의 해석법을 이용한 결과와 유한요소법을 이용한 결과를 비교하여 해석법의 정확성을 파악하였다. 그리고 종방향과 횡방향을 따라 응력의 분포형태를 분석하고, 콘크리트 슬래브의 두께, 콘크리트 탄성계수, 지반 탄성계수 등이 응력 분포에 미치는 영향을 분석하였다. 또한 하중 접지면적과 연관된 하중 접지압의 변화에 따른 콘크리트 포장의 응력 분포도 분석하였으며 콘크리트 포장에서 최대 응력이 어느 위치에서 발생하는지에 대한 연구도 수행하였다. 연구 결과 다축 하중에 의한 콘크리트 포장의 최대 응력은 콘크리트의 탄성계수가 증가할수록, 슬래브의 두께가 감소할수록, 그리고 지반 탄성계수가 감소할수록 증가하였다. 이러한 변수 등이 변할 때 축수에 따른 최대 응력 비율의 변화는 대체적으로 미소하지만 지반 탄성계수가 작을 때는 축수가 증가 할수록 최대 응력 비율이 급격히 증가한다. 횡방향의 최대 응력 발생 위치는 일반적으로는 접지압이 증가하면 바깥쪽에서 안쪽으로 이동하며 콘크리트 탄성계수나 슬래브 두께가 증가하거나 지반 탄성계수가 감소할 때도 최대 응력 발생 위치는 바깥쪽에서 안쪽으로 이동한다. 종방향 상의 최대 응력 위치는 하중 접지압에 영향을 받지 않으며 단축과 복축 하중일 경우는 축의 위치이며 삼축 하중일 경우에는 콘크리트 탄성계수나 슬래브 두께가 증가하던지 또는 지반 탄성계수가 감소하면 최대 응력이 생기는 종방향 위치가 양쪽 바깥축에서 중간축의 위치로 바뀌게 된다.

모서리부 차량 다축하중에 의한 콘크리트 도로 포장의 응력 분포 특성 (Stress Distribution of Concrete Pavements under Multi-Axle Vehicle Loads Applied at Pavement Edges)

  • 김성민;조병휘;이상훈
    • 한국도로학회논문집
    • /
    • 제8권4호
    • /
    • pp.13-24
    • /
    • 2006
  • 콘크리트 포장은 모서리(Edge) 부분에 차량 하중이 작용할 때 큰 응력을 받게 되며 이러한 응력은 포장의 거동 및 장기 공용성에 영향을 미친다. 따라서 본 연구는 콘크리트 포장의 유한요소 모델을 사용하여 콘크리트 포장의 모서리 부분에 복륜 단축, 복륜 복축, 복륜 삼축 등 복륜 다축 하중의 한쪽 차륜이 접하여 작용할 때 포장의 응력 분포와 최대 응력을 분석하기 위하여 수행되었다. 우선 종방향과 횡방향을 따라 응력의 분포 형태를 분석하였고, 콘크리트 슬래브의 두께, 콘크리트 탄성계수, 지반 탄성계수 등이 응력 분포에 미치는 영향을 분석하였다. 또한 하중 접지면적과 연관된 하중 접지압의 변화에 따른 콘크리트 포장의 응력 분포도 분석하였다. 그리고 콘크리트 포장에서 최대 응력이 어느 위치에서 발생하는지에 대한 연구도 수행하였다. 연구 결과 모서리부 하중에 의한 콘크리트 포장의 최대 응력은 콘크리트의 탄성계수가 증가할수록, 슬래브의 두께가 감소할수록, 그리고 지반 탄성계수가 감소할수록 증가하였다. 하중 접지압의 변화에 따른 최대 응력은 콘크리트 탄성계수와 지반 탄성계수의 크기에 따라서는 거의 일정한 변화를 보였으나 슬래브 두께는 얇아질수록 접지압에 따른 최대 응력의 변화가 뚜렷이 보였다. 최대 응력이 생기는 횡방향의 위치는 콘크리트 탄성계수와 지반 탄성계수에는 무관하게 일정하다. 하지만 슬래브의 두께는 두꺼워질수록 최대 응력의 횡방향 상 위치가 모서리에서 내부로 이동한다. 종방향의 최대 응력이 생기는 위치는 단축과 복축 하중일 경우는 축의 위치이며, 삼축 하중일 경우에는 콘크리트 탄성계수나 슬래브 두께가 증가하던지 또는 지반 탄성계수가 감소하면 최대 응력이 생기는 종방향 상 위치가 양쪽 바깥축에서 중간축의 위치로 바뀌게 된다.

  • PDF

변환영역 해석법을 이용한 덧씌우기 된 콘크리트 도로 포장의 다축차륜하중에 대한 거동 분석 (Behavior of Overlaid Concrete Pavements under Multi-Axle Vehicle Loads Obtained Using Transformed Field Domain Analysis)

  • 안주옥;김성민
    • 한국도로학회논문집
    • /
    • 제9권2호
    • /
    • pp.63-76
    • /
    • 2007
  • 본 연구에서는 콘크리트 포장에 덧씌우기를 하였을 때 다축차륜하중에 의한 응력분포특성을 분석하기 위하여 변환영역에서의 해석법을 개발하였다. 덧씌우기는 기존의 슬래브와 완전히 부착이 되었을 경우와 전혀 부착이 되지 않았을 때의 두 가지 극한 조건을 기준으로 분석을 하였다. 차륜하중은 복륜단축, 복륜복축, 복륜삼축 등 복륜다축하중을 고려하였으며 덧씌우기의 두께, 탄성계수, 포아송비 등이 응력분포에 미치는 영향을 분석하였다. 변환영역에서의 해석법을 이용하여 덧씌우기 포장을 분석하는 방법에 대하여 상세히 설명하였으며 해석결과의 정확성은 유한요소법을 이용한 해석결과와 비교하여 검증하였다. 해석을 수행한 결과 덧씌우기의 두께, 탄성계수, 포아송비의 증가는 기존 슬래브 하부의 최대인장응력을 감소시키며 감소 정도는 부착 덧씌우기가 비부착 덧씌우기에 비해 더 큰 것을 알 수 있었다. 또한 덧씌우기의 포아송비가 응력에 미치는 영향은 그리 크지 않은 것을 알 수 있었으며 부착과 비부착 덧씌우기 포장에서 덧씌우기의 두께 및 탄성계수의 증가에 따른 기존슬래브의 최대응력 감소특성도 분석하였다. 그리고 하중의 축수에 따른 부착과 비부착 덧씌우기 포장의 응력분포 및 최대응력특성도 분석하였다.

  • PDF

중앙부와 모서리부 다축 차량 하중에 의한 콘크리트 도로포장의 응력 상관관계 (Relationship between Concrete Pavement Stresses under Multi-Axle Interior and Edge Loads)

  • 김성민;조병휘;류성우
    • 한국도로학회논문집
    • /
    • 제8권3호
    • /
    • pp.143-153
    • /
    • 2006
  • 본 연구는 콘크리트 도로 포장에 복륜 단축, 복륜 복축, 복륜 삼축 등 복륜 다축 하중이 포장의 중앙부와 모서리부에 작용할 때 포장의 응력 분포 및 최대 응력의 차이를 분석하고 이러한 응력의 차이가 콘크리트 탄성계수, 슬래브 두께, 그리고 지반 탄성계수에 따라 어떠한 특성을 갖는지를 분석하기 위하여 수행되었다. 변환영역에서의 해석법을 이용하여 중앙부 하중에 의한 응력을 구하였으며 유한요소법을 이용하여 모서리부 하중에 의한 응력을 구하였다. 여러 가지 변수에 대하여 중앙부 하중에 의한 최대 응력과 모서리부 하중에 의한 최대 응력을 비교하였으며 이러한 최대 응력 비율을 예측할 수 있는 공식을 개발하였다. 이러한 공식을 이용하여 중앙부 하중에 의한 최대 응력에서 모서리부 하중에 의한 최대 응력을 예측하여 최대 응력 비율 예측 공식의 정확성을 검증하였다. 연구결과 중앙부와 모서리부 하중에 의한 콘크리트 포장의 최대 응력 변화 경향은 매우 비슷하였으며 종방향 상의 최대 응력 발생 위치는 일치하였다. 모서리부 하중에 의한 최대 응력을 중앙부 하중에 의한 최대 응력으로 나눈 최대 응력 비율은 하중 축 수가 많아질수록 감소하며, 콘크리트 탄성계수가 증가, 슬래브 두께가 증가, 지반 탄성 계수가 감소, 그리고 하중 접지압이 증가할수록 커지게 된다.

  • PDF

노반재료의 소성침하 예측식을 이용한 강화노반 두께 산정 (Estimation of Reinforced Roadbed Thickness based on Experimental Equation)

  • 신은철;양희생;최찬용
    • 한국철도학회:학술대회논문집
    • /
    • 한국철도학회 2008년도 춘계학술대회 논문집
    • /
    • pp.1747-1755
    • /
    • 2008
  • Design of the reinforced roadbed thickness is concerned with safe operation of trains at specified levels of speed, axle load and tonnage. There are two methods for evaluating it. One is using an experimental equation and the other is using elastic theory with considering axle load, material properties of subsoils and allowable elastic settlement. Multi-layered theory is used to determine reinforced roadbed thickness by RTRI. Although their reinforced roadbed thickness is designed with an objective of achieving a minimum standard 2.5mm of settlement on the subgrade surface, it is hardly applied to real design. Li(1994) has suggested the experimental model which design approach is to limit plastic strain and deformations for the design period. It is worth due to adopting soil equivalent number of repeated load application. Moreover, it has been a more advanced method than existing design methods because including resilient modulus of subsoil beneath track, soil deviator stress caused by train axle loads and MGT. In this paper, it is analyzed under domestic track conditions to estimate the reinforced roadbed thickness with different soil types.

  • PDF

도로자산관리를 위한 포장종합평가지수의 속성과 변화과정의 모델링 (Internal Property and Stochastic Deterioration Modeling of Total Pavement Condition Index for Transportation Asset Management)

  • 한대석;도명식;김부일
    • 한국도로학회논문집
    • /
    • 제19권5호
    • /
    • pp.1-11
    • /
    • 2017
  • PURPOSES : This study is aimed at development of a stochastic pavement deterioration forecasting model using National Highway Pavement Condition Index (NHPCI) to support infrastructure asset management. Using this model, the deterioration process regarding life expectancy, deterioration speed change, and reliability were estimated. METHODS : Eight years of Long-Term Pavement Performance (LTPP) data fused with traffic loads (Equivalent Single Axle Loads; ESAL) and structural capacity (Structural Number of Pavement; SNP) were used for the deterioration modeling. As an ideal stochastic model for asset management, Bayesian Markov multi-state exponential hazard model was introduced. RESULTS:The interval of NHPCI was empirically distributed from 8 to 2, and the estimation functions of individual condition indices (crack, rutting, and IRI) in conjunction with the NHPCI index were suggested. The derived deterioration curve shows that life expectancies for the preventive maintenance level was 8.34 years. The general life expectancy was 12.77 years and located in the statistical interval of 11.10-15.58 years at a 95.5% reliability level. CONCLUSIONS : This study originates and contributes to suggesting a simple way to develop a pavement deterioration model using the total condition index that considers road user satisfaction. A definition for level of service system and the corresponding life expectancies are useful for building long-term maintenance plan, especially in Life Cycle Cost Analysis (LCCA) work.

밀도추정함수와 평균보정계수를 이용한 BWIM 알고리즘의 현장실험 적용 (Application for a BWIM Algorithm Using Density Estimation Function and Average Modification Factor in The Field Test)

  • 한아름샘;신수봉
    • 한국구조물진단유지관리공학회 논문집
    • /
    • 제15권2호
    • /
    • pp.70-78
    • /
    • 2011
  • 본 논문은 변형률 계측데이터를 사용하는 신뢰성 및 정확성을 증진된 BWIM(Bridge Weigh-In-Motion) 알고리즘을 개발하고, 이를 교량에 대한 다양한 실험을 통해 검증하고자 하는 것이다. 본 논문에서는 밀도추정함수와 평균보정계수를 이용한 BWIM 알고리즘을 제시한다. 밀도추정함수는 다축하중을 추정할 때 신뢰할 수 있게 적용할 수 있음을 입증하였으며, 평균보정계수는 이론 계산된 모멘트와 계측된 변형률에서 계산한 모멘트 사이의 전반적인 오차를 최소화하기 위해 적용된다. 개발된 알고리즘은 수치예제, 실내모형실험 그리고 다주형 합성교량에 대한 현장실험을 통해 성공적으로 검증하였다.

신뢰도 기반 활하중모델에 의한 강합성 사장교의 충격계수 평가 (Evaluation of Impact Factor in Composite Cable-Stayed Bridges under Reliability-based Live Load Model)

  • 박재봉;박용명;김동현;이종한
    • 한국강구조학회 논문집
    • /
    • 제25권4호
    • /
    • pp.335-346
    • /
    • 2013
  • AASHTO LRFD 및 도로교한계상태설계기준에서는 신뢰도 기반 활하중 모델로부터 결정된 트럭하중과 차로하중을 동시에 재하하도록 하고 있으며, 트럭하중은 충격계수를 고려하되 차로하중은 충격계수를 적용하지 않도록 규정하고 있다. 본 연구에서는 중앙경간 230m, 400m 및 540m의 멀티케이블 강합성 사장교를 대상으로 트럭하중과 차로하중이 동시에 주행하는 경우에 대해 차량-교량 상호작용 해석을 수행하고 케이블과 보강거더의 충격계수를 평가하였다. 트럭하중은 6-자유도의 차량 모델을 사용하였으며, 차로하중은 일련의 1축 차량이 연행해서 주행하는 것으로 모사하였다. 교량의 감쇠비가 충격계수에 미치는 영향을 평가하였으며, 충격에 영향을 미치는 주요 인자인 노면조도와 주행속도를 해석변수로 고려하였다. 노면조도는 ISO 8608 규정에 근거하여 랜덤 생성하였으며, 차량-교량 상호작용해석 시 노면조도는 트럭하중에만 적용하였다. 한편, 사장교의 충격계수 평가를 위해 실무에서 사용되고 있는 영향선 기법에 의한 충격계수를 동적 상호작용 해석에 의한 결과와 비교하였다.

장래교통수요예측을 고려한 도로 유지관리 방안 (Road Maintenance Planning with Traffic Demand Forecasting)

  • 김정민;최승현;도명식;한대석
    • 한국도로학회논문집
    • /
    • 제18권3호
    • /
    • pp.47-57
    • /
    • 2016
  • PURPOSES : This study aims to examine the differences between the existing traffic demand forecasting method and the traffic demand forecasting method considering future regional development plans and new road construction and expansion plans using a four-step traffic demand forecast for a more objective and sophisticated national highway maintenance. This study ultimately aims to present future pavement deterioration and budget forecasting planning based on the examination. METHODS : This study used the latest data offered by the Korea Transport Data Base (KTDB) as the basic data for demand forecast. The analysis scope was set using the Daejeon Metropolitan City's O/D and network data. This study used a traffic demand program called TransCad, and performed a traffic assignment by vehicle type through the application of a user equilibrium-based multi-class assignment technique. This study forecasted future traffic demand by verifying whether or not a realistic traffic pattern was expressed similarly by undertaking a calibration process. This study performed a life cycle cost analysis based on traffic using the forecasted future demand or existing past pattern, or by assuming the constant traffic demand. The maintenance criteria were decided according to equivalent single axle loads (ESAL). The maintenance period in the concerned section was calculated in this study. This study also computed the maintenance costs using a construction method by applying the maintenance criteria considering the ESAL. The road user costs were calculated by using the user cost calculation logic applied to the Korean Pavement Management System, which is the existing study outcome. RESULTS : This study ascertained that the increase and decrease of traffic occurred in the concerned section according to the future development plans. Furthermore, there were differences from demand forecasting that did not consider the development plans. Realistic and accurate demand forecasting supported an optimized decision making that efficiently assigns maintenance costs, and can be used as very important basic information for maintenance decision making. CONCLUSIONS : Therefore, decision making for a more efficient and sophisticated road management than the method assuming future traffic can be expected to be the same as the existing pattern or steady traffic demand. The reflection of a reliable forecasting of the future traffic demand to life cycle cost analysis (LCCA) can be a very vital factor because many studies are generally performed without considering the future traffic demand or with an analysis through setting a scenario upon LCCA within a pavement management system.