• Journal of Korean Institute of Industrial Engineers
• /
• v.40 no.1
• /
• pp.60-83
• /
• 2014

This paper aims to propose a research framework of analyzing voting activities of a national assembly on the basis of member-level voting similarity and provides a case study in the $18^{th}$ national assembly in South Korea. First, we propose a bill contentiousness measure that gives a higher score to bills for which ayes and noes are more diversified in both conservative and progressive parties. Based on the bill contentiousness measure, the top 5%, 10%, and 20% bills were identified and used for further analyses. Moreover, we propose a member-level voting similarity measure that compensates for the lower frequency of noes, and evaluate the pair-wise voting similarities for all lawmakers. Then, voting similarity differences to the affiliated/non-affiliated parties were analyzed for the members in the two major parties according to some internal/external key factors. Finally, similar voting groups were identified and their affiliations were investigated based on the multi-dimensional scaling (MDS) and network analysis techniques. A case study on the $18^{th}$ national assembly of South Korea showed that the cohesion of the members in the 'Hanara' party becomes higher than that of the 'Minju' party as the bill contentiousness increases, whereas the number of elected, local constituency versus proportional representation, and the competition intensity in a local constituency were found to be partially influential to the voting activities of lawmakers. In addition, MDS and network analysis showed that there is a distinctive difference between two parties when all bills are analyzed, whereas the diversity of parties increases in the same group as the bill contentiousness increases.

• Proceedings of the KSME Conference
• /
• 2007.05a
• /
• pp.1213-1218
• /
• 2007

The brake judder comes from non-uniformities in the tire/wheel assembly caused by mechanical effects such as a brake torque variation (BTV). A disc thickness variation (DTV) related with the kinematic behavior of the disc was investigated a main source of BTV. In this study, a dynamic model with brake corner assembly of full vehicle using MSC.ADAMS was correlated by experiment of judder phenomenon. Judder was generated and correlated systematically by judder experiment in chassis and brake dynamometer from variation in the thickness of the disc. Also it has been found a judder transfer path and variation of the braking pressure. Through analysis of transfer function and movement of subsystem caused by BTV generation, design parameters have been found. Based on the results obtained from parameter study of suspension module, the effective design process and developed model with brake corner assembly was suggested for vibration reduction of steering wheel caused by the judder phenomenon.

• Journal of the Korean Society of Manufacturing Technology Engineers
• /
• v.20 no.4
• /
• pp.509-515
• /
• 2011

When a manufacturing system is designed, various kinds of evaluation methods are used for selecting the best alternative. Net present value, inner rate of return and payback period are popular quantitative measures for the economic assessment, but other qualitative measures should be considered for evaluation. The analytic hierarchy process(AHP) has been used as the popular method for the multi criteria decision making problem that considers both quantitative and qualitative criteria. This paper explains the process of economic assessment, and how to use the AHP for evaluating the designs of the assembly lines for lens module installed in mobile phone.

• Journal of Microbiology and Biotechnology
• /
• v.17 no.10
• /
• pp.1695-1699
• /
• 2007

Ferritin is an iron storage protein found in most living organisms as a natural assembled macromolecule. For studying the functional ability of the ferritin assembly, human H- and L-ferritins were expressed and purified from Pichia pastoris strain GS115. The recombinant H- and L-ferritins showed a globular form with transmission electron microscopy. The rate of iron uptake for H-ferritin was significantly faster than that for the L-ferritin in vitro. By gel permeation chromatography analysis, recombinant ferritins were confirmed as multimeric subunits with high molecular weight and it was indicated that assembled subunits were able to store iron in vivo.

• 한국전산유체공학회:학술대회논문집
• /
• 2004.10a
• /
• pp.151-154
• /
• 2004

The HANARO, a multi-purpose research reactor of 30 MWth open-tank-in-pool type, has been under normal operation since its initial criticality in February, 1995. Many experiments should be safely performed to activate the utilization of the HANARO. A flow simulated test facility has been developed for the verification of structural integrity of those experimental facilities prior to loading In the HANARO. This test facility is composed of three major parts; a half-core structure assembly, flow circulation system and support system. The half-core structure assembly is composed of plenum, grid plate, core channel with flow tubes, chimney and dummy pool. The flow channels are to be filled with flow orifices to simulate similar flow characteristics to the HANARO. This paper describes an analysis of the flow distribution of the cote channel and compares with the test results. As results, the analysis showed similar flow characteristics compared with those in the test results.

• IE interfaces
• /
• v.22 no.2
• /
• pp.165-173
• /
• 2009

This paper considers a two-component assembly system that makes different types of purchasing contracts by component type and studies the issue of coordinating those contracts. Acquisition of type 1 component is based on the long-term contract. In contrast, type 2 component is intermittently purchased under the sort-term contract. We identify the structural properties of the optimal short-term contract and investigate how the changes in system parameters affect the optimal performance. To provide managerial insights, we compare the short-term and long-term contracts for type 2 component and discuss the conditions that make the short-term contract preferable to the long-term contract. We also present a result which shows that coordinating the contracts of type 1 and type 2 components can be significantly profitable over uncoordinating them.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.404-405
• /
• 2006

Microarray-based DNA chips provide an architecture for multi-analyte sensing. In this paper, we report a new approach for DNA chip microarray fabrication. Multifunctional DNA chip microarray was made by immobilizing many kinds of biomaterials on transducers (particles). DNA chip microarray was prepared by randomly distributing a mixture of the particles on a chip pattern containing thousands of m-scale sites. The particles occupied a different sites from site to site. The particles were arranged on the chip pattern by the random fluidic self-assembly (RFSA) method, using a hydrophobic interaction for assembly.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2004.11a
• /
• pp.472-475
• /
• 2004

Microarray-based DNA chips provide an architecture for multi-analyte sensing. In this paper, we report a new approach for DNA chip microarray fabrication. Multifunctional DNA chip microarray was made by immobilizing many kinds of biomaterials on transducers (particles). DNA chip microarray was prepared by randomly distributing a mixture of the particles on a chip pattern containing thousands of m-scale sites. The particles occupied a different sites from site to site. The particles were arranged on the chip pattern by the random fluidic self-assembly (RFSA) method, using a hydrophobic interaction for assembly.

• Nuclear Engineering and Technology
• /
• v.53 no.10
• /
• pp.3207-3216
• /
• 2021

Three-dimensional structures of a vortical flow field and heat transfer characteristics in a partially blocked 7-pin fuel assembly mock-up of sodium-cooled fast reactor have been investigated through a numerical analysis using a commercial computational fluid dynamics code, ANSYS CFX. The simulation with the SST turbulence model agrees well with the experimental data of outlet and cladding wall temperatures. From the analysis on the limiting streamline at the wall, multi-scale vortexes developed in axial direction were found around the blockage. The vortex core has a high cladding wall temperature, and the attachment line has a low cladding wall temperature. The small-scale vortex structures significantly enhance the convective heat transfer because it increases the turbulent mixing and the turbulence kinetic energy. The large-scale vortex structures supply thermal energy near the heated cladding wall surface. It is expected that control of the vortex structures in the fuel assembly plays a significant role in the convective heat transfer enhancement. Furthermore, the blockage plate and grid spacer increase the pressure drop to about 36% compared to the bare case.

• The Bulletin of The Korean Astronomical Society
• /
• v.44 no.2
• /
• pp.59.1-59.1
• /
• 2019

I will compute the rate of merger events in the multi-scale initial conditions to forecast special events driving the anisotropic assembly of dark matter halos and understand their impact on galaxy formation. Beyond halo mergers, I consider all sets of mergers, including wall and lament mergers, as they impact the geometry of galactic infall. Their one- and two-points statistics are computed as a function of cosmic time. I establish the relation between merger rates and connectivity, which is then used to assess the impact the large scale structures on assembly bias. The anisotropy of the cosmic web, as encoded in this theory, is a signi cant ingredient to describe jointly the physics and dynamics of galaxies in their environment, e.g. in the context of intrinsic alignments or morphological diversity.