• Nuclear Engineering and Technology
• /
• 제44권2호
• /
• pp.207-224
• /
• 2012

This article discusses selects of some outstanding problems in nuclear reactor analysis, with proposed approaches thereto and numerical test results, as follows: i) multi-group approximation in the transport equation, ii) homogenization based on isolated single-assembly calculation, and iii) critical spectrum in Monte Carlo depletion.

• 한국철도학회:학술대회논문집
• /
• 한국철도학회 1999년도 추계학술대회 논문집
• /
• pp.368-375
• /
• 1999

This paper describes the evaluation methods and criteria used verify field performance of automatic multi-coupler for the PMC rolling stock. Automatic multi-coupler was designed and manufactured by KRRI , Woojin electric machinery CO., and Yujinchajeon MFG.CO., LTD in 1999. Through field performance test of PMC rolling stock, vibration, brake system, assembly and disassembly of complex train were measured on the condition of service operation. As a result, test results meet the criteria proposed by KNR and KRRI.

• 산업경영시스템학회지
• /
• 제20권44호
• /
• pp.1-12
• /
• 1997

In this paper a new heuristic algorithm has been developed and presented for minimizing the total completion time of a scheduling problem in a multi stage automated machining and assembly systems. The proposed Higher Ratio First(HRF) algorithm is based on the idea that jobs with higher processing time ratio should be a higher priority. The heuristic algorithm is implemented on the various problem cases by number of jobs and machines. The proposed algorithm provided smaller makespan than the makespan applied by three previously documented heuristics. The results obtained show a superior solution by the new heuristic over previous heuristics on all problem sizes.

• 대한산업공학회지
• /
• 제20권4호
• /
• pp.23-35
• /
• 1994

Efficient operation of a component placement machine with a multi-head in a PCB assembly process is considered. The problem consists of two subproblems, which are the optimal allocation of the component tape reels in the rack and the optimal mounting sequence of the components on a printed circuit board. We analyze the problem and propose a heuristic algorithm to solve it. The heuristic can be used for the one head case too. Computational experiences on some real world problems show the effectiveness of the heuristic in terms of speed and solution quality.

• Applied Science and Convergence Technology
• /
• 제24권1호
• /
• pp.9-15
• /
• 2015

The practical pumping speed of a dry pump is considerably lower than the intrinsic speed because of back-streaming through finite gaps of the rotor assembly. The maximum compression ratio and the ultimate pressure of the pump are also directly influenced by the back-streaming rate. Therefore, information on the gap conductance, which determines the back-streaming characteristics of the rotor assembly, is the most important key for estimating the pumping performance of a dry pump. In this paper, the feasibility of calculating analytically the pumping performance of a multi-stage Roots pump, one of the most popular types of dry pumps, by quantifying the gap conductance in a rational way, is discussed.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2002년도 춘계학술대회논문집
• /
• pp.554-558
• /
• 2002

A magnetostrictive sensor is used to measure stress waves propagating in a ferromagnetic cylinder without physical contact. The performance of a magnetostrictive sensor is affected most significantly by the bias magnetic field applied around the measurement location. The goal of this paper is to carry out the topology optimization of the bias magnet and yoke assembly to maximize the sensor output for traveling bending waves. We will use the multi-resolution topology optimization strategy to find the assembly of the bias magnet and the yoke that is easy to realize. The effectiveness of the present design is confirmed by an actual measurement of the sensor signal with the proposed bias magnet and yoke configuration.

• 한국경영과학회:학술대회논문집
• /
• 한국경영과학회/대한산업공학회 1999년도 춘계공동학술대회:정보화시대의 지식경영
• /
• pp.295-295
• /
• 1999

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1992년도 하계학술대회 논문집 A
• /
• pp.422-424
• /
• 1992

In this paper, we are designed a hierachical system controller and builed a robot system for high precision assembly consisting in multi-arms and multi-sensor. For the control of a multi-arms robot system, the robot system are consisted of cell controller, station controller and device. The Operating System of a cell controller is VxWorks for real-time multi-processing. Using by C-language, we are proposed a multi-arms robot control language based a RCCL, and this control language is partially implemented and tested in multi-robot control system.

• Nuclear Engineering and Technology
• /
• 제51권8호
• /
• pp.1871-1885
• /
• 2019

The deterministic MOC code STREAM of the Computational Reactor Physics and Experiment (CORE) laboratory of Ulsan National Institute of Science and Technology (UNIST), was initially designed for the calculation of pressurized water reactor two- and three-dimensional assemblies and cores. Since fast reactors play an important role in the generation-IV concept, it was decided that the code should be upgraded for the analysis of fast neutron spectrum reactors. This paper presents a coupled code - TULIP/STREAM, developed for the fast reactor assembly and core calculations. The TULIP code produces self-shielded multi-group cross-sections using a one-dimensional cylindrical model. The generated cross-section library is used in the STREAM code which solves eigenvalue problems for a two-dimensional assembly and a multi-assembly whole reactor core. Multiplication factors and steady-state power distributions were compared with the reference solutions obtained by the continuous energy Monte-Carlo code MCS. With the developed code, a sensitivity study of the number of energy groups, the order of anisotropic P_N scattering, and the multi-group cross-section generation model was performed on the k_eff and power distribution. The 2D core simulation calculations show that the TULIP/STREAM code gives a k_eff error smaller than 200 pcm and the root mean square errors of the pin-wise power distributions within 2%.

• Composites Research
• /
• 제32권5호
• /
• pp.243-248
• /
• 2019

As demand of light weight in the automotive industry has increased, the cowl cross member has been investigated using various methods to change the material. Conventionally, a cowl cross member has been made of steel and aluminum, but recently researchers tested multi-material such as aluminum and plastic. We studied a new model of the cowl cross member made of composite and non ferrous materials. For products with a high degree of freedom in design, generally, the method of topology optimization is advantageous and for the partial bracket part of the cowl cross member had a degree of freedom in the design, a topology optimization is appropriate. Considering the characteristics of the cowl cross members, we need research to minimize the weight while having the performance of noise, vibration and harshness(NVH). Taking the mounting status of the product into consideration, we used an assembly model to optimize the cowl cross member. But this method took too much time so we considered simple cowl cross member assemble conditions using the direct matrix input method(DMI) with the Craig-Bampton Nodal Method. This method is capable of considering the status of the assembly without assembling the model, which reduced the solving time and increased the accuracy comparison with a cowl cross member without DMI.