• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.22 no.12
• /
• pp.1653-1658
• /
• 2018

This study aims to analyze the cases of VR space to improve the regulations. The space is divided according to the multi-use business act when the VR simulator and the VR game are simultaneously installed in a single space. It is necessary to amend the rules of the Tourism Promotion Act so that it can operate at a certain area of the youth game room subject to the Game Industry Law. Amendments that do not compartmentalize a space partition in the Multi-use Business Act should be carried out simultaneously. This is safer alternative by collective management rather than by the safety applied within a limited space by eliminating the compartment by industry. This is a legal amendment that allows VR simulator and VR game to be operated in the same space even in small sized amusement facilities such as other amusement facilities. This regulatory improvement plan is expected to help the activation of small sized VR theme parks.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.45 no.5
• /
• pp.71-81
• /
• 2008

In this paper, we propose a novel Globally Asynchronous, Locally Dynamic System(GALDS) bus and demonstrate its performance. The proposed GALDS bus is the bidirectional multitasking bus with the segmented bus architecture supporting the concurrent operation of multi-masters and multi-slaves. By analyzing system tasks, the bus architecture chooses the optimal frequency for each If among multiples of bus frequency and thus we can reduce the overall power consumption. For efficient data communications between IPs operating in different frequencies, we designed an asynchronous and bidirectional FIFO based on an asynchronous wrapper with hand-shaking interface. In addition, since systems can be easily expandable by inserting bus segments, the proposed architecture has advantages in IP reusability and structural flexibility As a test example, a four-segment bus haying four masters and four slaves were designed by using Verilog HDL. We demonstrate multitasking operations with read/write data transfers by simulation when the ratios of operation frequency are 1:1, 1:2, 1:4 and 1:8. The data transfer mode is a 16 burst increment mode compatible with Advanced Microcontroller Bus Architecture(AMBA). The maximum operation latency of the proposed GALDS bus is 22 clock cycles for the bus write operation, and 44 clock cycles for read.

• The Transactions of the Korea Information Processing Society
• /
• v.13 no.7
• /
• pp.335-347
• /
• 2024

Open-vocabulary 3D point cloud instance segmentation (OV-3DIS) is a challenging visual task to segment a 3D scene point cloud into object instances of both base and novel classes. In this paper, we propose a novel model Open3DME for OV-3DIS to address important design issues and overcome limitations of the existing approaches. First, in order to improve the quality of class-agnostic 3D masks, our model makes use of T3DIS, an advanced Transformer-based 3D point cloud instance segmentation model, as mask proposal module. Second, in order to obtain semantically text-aligned visual features of each point cloud segment, our model extracts both 2D and 3D features from the point cloud and the corresponding multi-view RGB images by using pretrained CLIP and OpenSeg encoders respectively. Last, to effectively make use of both 2D and 3D visual features of each point cloud segment during label assignment, our model adopts a unique feature ensemble method. To validate our model, we conducted both quantitative and qualitative experiments on ScanNet-V2 benchmark dataset, demonstrating significant performance gains.

• Journal of Broadcast Engineering
• /
• v.14 no.4
• /
• pp.450-462
• /
• 2009

So far, many methods for segmenting single images or video have been proposed, but few methods have dealt with multiple images with analogous content. These images, which we term consistent scene images, include concurrent images of a scene and gathered images of a similar foreground, and may be collectively utilized to describe a scene or as input images for multi-view stereo. In this paper, we present a method to segment these images with minimum user input, specifically, manual segmentation of one image, by iteratively propagating information via multi-level cues with adaptive confidence depending on the nature of the images. Propagated cues are used as the bases to compute multi-level potentials in an MRF framework, and segmentation is done by energy minimization. Both cues and potentials are classified as low-, mid-, and high- levels based on whether they pertain to pixels, patches, and shapes. A major aspect of our approach is utilizing mid-level cues to compute low- and mid- level potentials, and high-level cues to compute low-, mid-, and high- level potentials, thereby making use of inherent information. Through this process, the proposed method attempts to maximize the amount of both extracted and utilized information in order to maximize the consistency of the segmentation. We demonstrate the effectiveness of the proposed method on several sets of consistent scene images and provide a comparison with results based only on mid-level cues [1].

• Structural Engineering and Mechanics
• /
• v.63 no.3
• /
• pp.329-345
• /
• 2017

This paper devoted to study dynamic interaction between crack and inclusion or void by developing the eXtended Finite Element Methods (XFEM). A novel XFEM approximation is presented for these structures containing multi discontinuities (void, inclusion, and crack). The level set methods are used so that elements that include a crack segment, the boundary of a void, or the boundary of an inclusion are not required to conform to discontinuous edges. The investigation covers the effects of a single circular or elliptical void / stiff inclusion, and multi stiff inclusions on the crack propagation path under dynamic loads. Both the void and the inclusion have a significant effect on the dynamic crack propagation path. The crack initially curves towards into the void, then, the crack moves round the void and propagates away the void. If a large void lies in front of crack tip, the crack may propagate into the void. If an enough small void lies in front of crack tip, the void may have a slight or no influence on the crack propagation path. For a stiff inclusion, the crack initially propagates away the inclusion, then, after the crack moves round the inclusion, it starts to propagate along its original path. As ${\delta}$ (the ratio of the elastic modulus of the inclusion to that of the matrix) increases, a larger curvature of the crack path deflection can be observed. However, as ${\delta}$ increases from 2 to 10, the curvature has an evident increase. By comparison, the curvature has a slight increase, as ${\delta}$ increases from 10 to 1000.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.38 no.5
• /
• pp.576-582
• /
• 2001

The Multi-Band Excitation(MBE) speech coder uses a different approach for the representation of the excitation signal. It replaces the frame-based single voiced/unvoiced classification of a classical speech coder with a set of such decision over harmonic intervals in the frequency domain. This enables each speech segment to be a mixture of voiced and unvoiced, and improves the synthetic speech quality by reducing decision errors that might occur on the frame-based single voiced and unvoiced decision process when input speech is degraded with noise. The IMBE-LP, improved version of MBE with linear prediction, represents the spectral information of MBE model with linear prediction coefficients to obtain low bit rate of 2.4 kbps. In this Paper, we proposed a variable rate IMBE-LP vocoder that has lower bit rate than IMBE-LP without degrading the synthetic speech quality. To determine the LP order, it uses the spectral band information of the MBE model that has something to do with he input speech's characteristics. Experimental results are riven with our findings and discussions.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.97-111
• /
• 2000

The purpose of this study were to segment the hair care cosmetics market according to the benefits sought, to categorize the information sources on the hair care cosmetics, and to characterize the profiles of the segmentized groups of university students. Self-administered questionnaires were distributed to 457 university students in Chonbuk province from Jul. 10 to Jul. 21, 1999. Frequencies and percentages were calculated, and factor analysis, cluster analysis, one-way ANOVA, and $\chi$$^2$-test were used. The results were: 1. University student's benefit variables on hair care cosmetics were classified into special function, fashion, practicality, brand, fragrance, styling, nutritional reinforcement, and economy. And they were segmentized into the feeling pursuit, the multi-benefit pursuit, the practicality pursuit, the benefit unconscious, and the function pursuit. The information sources were classified into marketer-dominated sources, neutral sources and consumer -dominated sources. 2. The feeling pursuit strongly sought for fashion, brand and fragrance pursuit, but considered economy less, chiefly used the marketer-dominated and neutral information sources, and showed much interests in hair care cosmetics, and were consisted of women dominantly. The multi-benefits pursuit sought for various kinds of benefits from hair care cosmetics, depended heavily on various kinds of information sources, were well aware of their hair types and instructions on the hair care cosmetics label, and were consisted of women dominantly. The practicality pursuit highly sought for practicality, but low on the fashion, were not aware of their hair style, haler care, hair health status and hair type, and almost half of them are men. The benefit unconscious showed low concern about, all kinds of benefits and hair care cosmetics, and were consisted of more men than women. The function pursuit highly sought for special function and nutritional reinforcement, mainly depended on the consumer-dominated sources. and showed low concern about their hair style and hair care.

• Proceedings of the KSRS Conference
• /
• 2005.10a
• /
• pp.237-240
• /
• 2005

Calibration and Validation are major element of any space borne Earth Observation Mission. These activities are the major objective of the commissioning phases but routine activities shall be maintained during the whole mission in order to maintain the quality of the product delivered to the users or at least to fully characterise the evolution with time of the product quality. With the launch of ERS-l in 1991, the European Space Agency decided to put in place a group dedicated to these activities, along with the daily monitoring of the product quality for anomaly detection and algorithm evolution. These four elements are all strongly linked together. Today this group is fully responsible for the monitoring of two ESA missions, ERS-2 and Envisat, for a total of 12 instruments of various types, preparing itself for the Earth Explorer series of five. other satellites (Cryosat, Goce, SMOS, ADM-Aeolus, Swarm) and at various levels in past and future Third Party Missions such as Landsat, J-ERS, ALOS and KOMPSAT. The Joint proposal by the European Union and the European Space Agency for a 'Global Monitoring for Environment and Security' project (GMES), triggers a review of the scope of these activities in a much wider framework than the handling of single missions with specific tools, methods and activities. Because of the global objective of this proposal, it is necessary to put in place Multi-Mission Calibration and Validation systems and procedures. GMES Calibration and Validation activities will rely on multi source data access, interoperability, long-term data preservation, and definition standards to facilitate the above objectives. The scope of this presentation is to give an overview of the current Calibration and Validation activities at ESA, and the planned evolution in the context of GMES.

• Korean Journal of Materials Research
• /
• v.21 no.2
• /
• pp.89-94
• /
• 2011

In this work, fabrication and electrochemical analysis of an individual multi-walled carbon nanotube (MWNT) electrode are carried out to confirm the applicability of electrochemical sensing. The reactive ion etching (RIE) process is performed to obtain sensitive MWNT electrodes. In order to characterize the electrochemical properties, an individual MWNT is cut by RIE under oxygen atmosphere into two segments with a small gap: one segment is applied to the working electrode and the other is used as a counter electrode. Electrical contacts are provided by nanolithography to the two MWNT electrodes. Dopamine is specially selected as an analytical molecule for electrochemical detection using the MWNT electrode. Using a quasi-Ag/AgCl reference electrode, which was fabricated by us, the nanoelectrodes are subjected to cyclic voltammetry inside a $2{\mu}L$ droplet of dopamine solution. In the experiment, RIE power is found to be a more effective parameter to cut an individual MWNT and to generate "broken" open state, which shows good electrochemical performance, at the end of the MWNT segments. It is found that the pico-molar level concentration of analytical molecules can be determined by an MWNT electrode. We believe that the MWNT electrode fabricated and treated by RIE has the potential for use in high-sensitivity electrochemical measurement and that the proposed scheme can contribute to device miniaturization.

• The KIPS Transactions:PartB
• /
• v.17B no.5
• /
• pp.355-362
• /
• 2010

Face tracking is to estimate the motion of a non-rigid face together with a rigid head in 3D, and plays important roles in higher levels such as face/facial expression/emotion recognition. In this paper, we propose an AAM-based face tracking algorithm. AAM has been widely used to segment and track deformable objects, but there are still many difficulties. Particularly, it often tends to diverge or converge into local minima when a target object is self-occluded, partially or completely occluded. To address this problem, we utilize the scale invariant feature transform (SIFT). SIFT is an effective method for self and partial occlusion because it is able to find correspondence between feature points under partial loss. And it enables an AAM to continue to track without re-initialization in complete occlusions thanks to the good performance of global matching. We also register and use the SIFT features extracted from multi-view face images during tracking to effectively track a face across large pose changes. Our proposed algorithm is validated by comparing other algorithms under the above 3 kinds of occlusions.