• 제목/요약/키워드: multi detector CT

검색결과 79건 처리시간 0.02초

Comparison of effective dose for imaging of mandible between multi-detector CT and cone-beam CT

  • Jeong, Dae-Kyo;Lee, Sang-Chul;Huh, Kyung-Hoe;Yi, Won-Jin;Heo, Min-Suk;Lee, Sam-Sun;Choi, Soon-Chul
    • Imaging Science in Dentistry
    • /
    • 제42권2호
    • /
    • pp.65-70
    • /
    • 2012
  • Purpose : The aim of this study was to compare the effective dose for imaging of mandible between multi-detector computed tomography (MDCT) and cone-beam computed tomography (CBCT). An MDCT with low dose technique was also compared with them. Materials and Methods : Thermoluminescent dosimeter (TLD) chips were placed at 25 organ sites of an anthropomorphic phantom. The mandible of the phantom was exposed using 2 different types of MDCT units (Somatom Sensation 10 for standard-dose MDCT, Somatom Emotion 6 for low-dose MDCT) and 3 different CBCT units (AZ3000CT, Implagraphy, and Kavo 3D eXaM). The radiation absorbed dose was measured and the effective dose was calculated according to the ICRP 2007 report. Results : The effective dose was the highest for Somatom Sensation 10 (425.84 ${\mu}Sv$), followed by AZ3000CT (332.4 ${\mu}Sv$), Somatom Emotion 6 (199.38 ${\mu}Sv$), and 3D eXaM (111.6 ${\mu}Sv$); it was the lowest for Implagraphy (83.09 ${\mu}Sv$). The CBCT showed significant variation in dose level with different device. Conclusion : The effective doses of MDCTs were not significantly different from those of CBCTs for imaging of mandible. The effective dose of MDCT could be markedly decreased by using the low-dose technique.

이동 형 산업용 단층측정 장치를 위한 감마선 검출시스템 개발 (Development of Measurement System for Industrial Transportable Gamma Ray CT)

  • 김종범;정성희;문진호
    • 방사선산업학회지
    • /
    • 제6권3호
    • /
    • pp.231-237
    • /
    • 2012
  • This paper introduces a gamma-ray measurement system for a transportable tomography which is applicable for an industrial process diagnosis. The gamma-ray measurement system consists of pulse mode operating 72 channel CsI detectors, main AMP-pulse shaper, single channel analyzer, counter and control PC. The CsI crystal is coupled with a PIN diode which is connected to an amplifier and pulse shaper. For a compact design, the amplifier and pulse shaping circuit are included in a single package. 36 sets of CsI detectors are connected to a multi-channel counter through single channel analyzers. A computer controls and collects data from two multi-channel counters. This configuration results in 72 channel counting system in total. The CT rotator and radiation measurement system are controlled by a PC with LabVIEW program. Tomographic data were measured for a phantom by the measurement system and transportable gamma-ray CT. From the experimental data image reconstructions were performed by ML-EM algorithm. The result showed that the CsI detector system can be a suitable component for transportable gamma-ray CT system.

Usefulness of Mobile Computed Tomography in Patients with Coronavirus Disease 2019 Pneumonia: A Case Series

  • Ji Young Rho;Kwon-Ha Yoon;Sooyeon Jeong;Jae-Hoon Lee;Chul Park;Hye-Won Kim
    • Korean Journal of Radiology
    • /
    • 제21권8호
    • /
    • pp.1018-1023
    • /
    • 2020
  • The coronavirus disease (COVID-19) outbreak has reached global pandemic status as announced by the World Health Organization, which currently recommends reverse transcription polymerase chain reaction (RT-PCR) as the standard diagnostic tool. However, although the RT-PCR test results may be found negative, there are cases that are found positive for COVID-19 pneumonia on computed tomography (CT) scan. CT is also useful in assessing the severity of COVID-19 pneumonia. When clinicians desire a CT scan of a patient with COVID-19 to monitor treatment response, a safe method for patient transport is necessary. To address the engagement of medical resources necessary to transport a patient with COVID-19, our institution has implemented the use of mobile CT. Therefore, we report two cases of COVID-19 pneumonia evaluated by using mobile cone-beam CT. Although mobile cone-beam CT had some limitations regarding its image quality such as scatter noise, motion and streak artifacts, and limited field of view compared with conventional multi-detector CT, both cases had acceptable image quality to establish the diagnosis of COVID-19 pneumonia. We report the usefulness of mobile cone-beam CT in patients with COVID-19 pneumonia.

The Effects of a Vasodilator on Transluminal Attenuation Gradient at Coronary Computed Tomography Angiography

  • Moon Sung Kim;Eun-Ju Kang;Hyun Jin Kim;Moo Hyun Kim;Ki-Nam Lee
    • Korean Journal of Radiology
    • /
    • 제21권12호
    • /
    • pp.1285-1293
    • /
    • 2020
  • Objective: To evaluate the effects of vasodilators on contrast enhancement and transluminal attenuation gradient (TAG) of coronary arteries at coronary computed tomography angiography (CCTA). Materials and Methods: We retrospectively reviewed CCTA scans of patients who underwent double-acquisition CCTA; CCTA without a vasodilator, and CCTA during a intravenous (IV) infusion of nitrate. Among them, we enrolled 19 patients who had no significant atherosclerotic lesions or coronary spasms. In the control group, 28 patients were enrolled who showed normal coronary arteries on CCTA, which was acquired by a conventional method (sublingual vasodilator). We measured the TAG and Hounsfield units for each of the three major epicardial coronary arteries (reported as 'ProxHU') and then compared the results between the nitrate administration methods (CT without vasodilator [CTpre], CT with IV vasodilator [CTiv], and CT with sublingual vasodilator [CTsub]). Results: The mean TAG showed a significant difference between the coronary arteries (right coronary artery [RCA] > left anterior descending artery [LAD] > left circumflex artery [LCX], p < 0.05), while there was no difference in ProxHU of each coronary artery in all three types of nitrate administration methods (p > 0.05). The TAG of CTpre group showed steeper slope than those of vasodilator groups (CTiv and CTsub) on LAD and LCX ([LAD: CTpre = -22.1 ± 6.66, CTiv = -16.76 ± 5.78, and CTsub = -16.47 ± 5.78, p = 0.005], [LCX: CTpre = -31.26 ± 17.43, CTiv = -23.74 ± 14.06, and CTsub = -20.94 ± 12.15, p = 0.051]), while that of RCA showed no significant differences (p = 0.600). When comparing proxHU, CTiv showed higher proxHU than that of CTpre or CTsub, especially on LCX (CTpre = 426.7 ± 68.3, CTiv = 467.9 ± 84.9, and CTsub = 404.9 ± 63.3, p = 0.013). ProxHU showed a negative correlation with TAG on all three of methods (r = -0.280, p < 0.001). Conclusion: TAG in CCTA was significantly affected by vasodilator administration. Both TAG and ProxHU of coronary arteries tend to increase with vasodilator administration on CCTA.

비등방성 2차원 확산 기반 필터를 이용한 전산화단층영상 품질 개선 (Image Quality Improvement in Computed Tomography by Using Anisotropic 2-Dimensional Diffusion Based Filter)

  • 성열훈
    • 한국방사선학회논문지
    • /
    • 제10권1호
    • /
    • pp.45-51
    • /
    • 2016
  • 본 연구에서는 비등방성 2차원 확산 기반 필터를 이용하여 전산화단층영상(computed tomography, CT)의 노이즈 제거와 공간분해능을 향상하고자 하였다. 실험은 4-채널 다중검출기 전산화단층영상기기(4-channel multi-detector computed tomography, MDCT)를 이용하였으며, CT 영상품질 평가를 위해 미국 의학물리학자협의회(american association of physicists in medicine, AAPM) CT 성능 평가용 팬톰을 사용하였다. X-선 조사 조건은 120 kVp, 100 mAs로 고정한 후 ultra-high resolution으로 10 mm 축 방향 스캔 하였다. 본 연구에서 제안한 비등방성 2차원 확산 기반 필터는 원 영상에 각 픽셀에 가중치 1.2를 곱하고 0.4% 히스토그램 스트레칭을 통해 영상의 대조도를 증가시킨 후 비등방성 2차원 확산 필터를 적용하였다. 그 결과, 공간분해능은 원 영상에서 0.75 mm까지 구분되었지만 제안한 비등방성 2차원 확산 기반 필터 영상에서는 0.40 mm까지 구분되었다. 원 영상의 노이즈는 46.0, 제안한 비등방성 2차원 확산 기반 필터 영상의 노이즈는 33.5로 27.2%가 감소하였다. 우리가 제안한 비등방성 2차원 확산 기반 필터는 CT의 노이즈 제거와 공간분해능을 향상시킬 수 있었다.

복부 간 CT 검사에서 CareDose 4D 사용에 따른 선량 감소 및 화질 평가 (Dose Reduction and Image Quality Assessment of the CareDose 4D Technique on Abdomen Liver Computed Tomography)

  • 석종민;전우진;박영준;이진
    • 한국방사선학회논문지
    • /
    • 제11권3호
    • /
    • pp.109-115
    • /
    • 2017
  • 본 연구의 목적은 128 MDCT(Multi-detector computed tomography)의 CareDose 4D 선량감소 효과와 임상적 유용성을 평가하고자 시행되었다. Phantom과 임상 복부 검사 연구라는 두 가지 방법을 통해 128 MDCT CareDose 4D 시스템 적용 전후의 피사체 피폭선량과 영상 평가를 실시하였다. Phantom 연구에서는 CareDose 4D 적용 전후의 두 그룹에 대하여 중앙과 3, 6, 9, 12시의 방향으로 ROI(Region of interest)를 위치시켰고, 임상 연구에서는 간의 각 8구획에 대하여 CareDose 4D 적용 전 후 두 그룹에 대하여 ROI를 위치하여 CT Number, Noise, DLP(Dose length product)선량을 측정하였다. 측정결과 Phantom 및 임상연구에서 CT Number는 적용 전 후 값에 차이가 없었고(p>.05), 선량관련 CTDIvol(CT dose index volume) 측정값 및 유효선량은 CareDose 4D 적용 후가 낮았다 (p<.05). 결론적으로 CareDose 4D를 사용하면 영상의 화질을 저하시키지 않고 최적의 영상정보를 획득하면서 환자 선량이 감소되는 효과를 얻을 수 있다.

이온 전리함 및 TLD 법을 이용한 Multi-Detector Computed Tomography의 흡수선량 및 체표면 선량 평가 (Evaluation of Absorbed Dose and Skin Dose with MDCT Using Ionization Chamber and TLD)

  • 전경수;오영기;백종근;김옥배;김진희;최태진;정동혁;김정기
    • 한국의학물리학회지:의학물리
    • /
    • 제24권1호
    • /
    • pp.35-40
    • /
    • 2013
  • 최근 세기조절 방사선치료(Intensity Modulated Radiation Therapy, IMRT)와 같은 고 정밀 방사선 치료의 발전과 함께 두 경부 환자의 진단 및 치료 계획 그리고 추적관찰(follw-up)을 목적으로 한 CT 촬영 횟수가 크게 증가하고 있다. 이러한 CT 촬영의 증가와 MDCT와 같은 CT의 발전과 한 검사로 받는 피폭 선량이 상대적으로 다른 검사에 비하여 월등히 크기 때문에 환자 피폭 선량의 정확한 선량 평가가 요구된다. 본 연구에서는 두 경부용 물팬텀(cylindrical water phantom)을 자체 제작하여, 연필형 이온 전리함 및 30 cc 이온 전리함 그리고 LiF:Mg,Cu,P TL 분말을 사용한 열형광 선량 측정법(Thermoluminescent Dosimetry, TLD)을 이용하여 Multi Detector Computed Tomography, MDCT의 흡수 선량 및 체표면 선량을 비교 평가하였다. MDCT의 슬라이스 폭의 일정한 선량 균일성을 확인하기 위하여 콜리메이션 2 mm 단일 빔의 프로필을 1 mm 간격으로 80 mm 측정한 결과 빔의 폭이 12 mm이고 선량 분포는 80~100%로 빔의 출력은 +Y 방향으로 높게 나타났다. 물팬텀의 중심부에서 연필형 이온 전리함 및 30 cc 이온 전리함과 TLD의 흡수 선량은 각각 31.83 mGy, 33.58 mGy, 32.73 mGy로 TLD의 흡수 선량은 이온전리함으로 구한 흡수선량과 오차범위 내에서 일치하고 있음을 알 수 있었다. 체표면 10 mm 깊이에서의 TLD 선량은 33.92 mGy로 중심부보다 약 3.5% 높게 평가 되었다. 이러한 흡수선량은 두 경부 환자가 최초 진단을 위한 CT 촬영으로부터 치료계획 및 추적관찰을 목적으로 한 CT촬영까지 4회의 CT촬영을 할 경우, 이로 인한 피폭 선량이 약 14 cGy임을 알 수 있었다. 따라서 방사선치료를 위한 CT 촬영으로 인한 환자의 피폭이 적지않음을 확인하였고 가능한 한 피폭을 줄이려는 노력을 기울여야 할 것이다.

64 채널 Multi-Detector Computed Tomography를 이용한 관상동맥검사의 선량 : 검사 프로토콜 다변화에 따른 환자선량 감소 (Doses of Coronary Study in 64 Channel Multi-Detector Computed Tomography : Reduced Radiation Dose According to Varity of Examnination Protocols)

  • 김문찬
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제32권3호
    • /
    • pp.299-306
    • /
    • 2009
  • MDCT의 시간분해능 향상과 등방성 해상능(isotrophic resolution) 영상의 획득, 그리고 지능적인 심전도 동조를 바탕으로 하여 심혈관 질환의 효과적인 진단검사로 인정받고 있는 후향적 심전도 동조화(retrospective ECG gating) 하의 coronary CT angiography는 상대적으로 많은 환자선량을 제공함으로 인해 우수한 진단방법으로서의 장점을 반감시키고 있다. 이에 각 장치 제조사에서는 환자선량을 감소시키는 방법의 연구가 활성화되어 왔으며, 이의 일환으로 지능적인 cardiac dose modulation 기술과 전향적 심전도 동조화(prospective ECG gating)를 사용한 sequential scan이 도입되고 있다. 이에 본 연구에서는 64 채널 MDCT에서 54 kg, 163 cm인 여성 인체모형팬텀을 대상으로 하고 형광유리선량계를 사용하여 후향적 심전도 동조화 하의 coronary CT angiography 프로토콜에서 환자선량의 정량적 평가와 환자선량 감소를 위해 본원에서 선택적으로 적용하고 있는 5가지 검사 프로토콜을 적용하였을 경우의 effective dose와 중요 부위의 organ dose를 측정 비교하여 다음과 같은 결과를 얻었다. 1) Dose modulation없이 120 kVp와 210 mAs의 노출조건으로 retrospectively ECG gated helical scan으로 시행한 conventional coronary CT angiography 프로토콜의 effective dose는 17.8 mSv였으며, 심장의 organ dose는 103.8 mGy였다. 2) 관전압을 120 kVp에서 100 kVp로 낮추었을 경우 effective dose는 11.0 mSv로 conventional coronary CT에 비해 38.2%가 감소하였으며, 심장은 67.3 mGy로 45.2%가 감소하였다. 3) Cardiac dose modulation을 적용한 경우 effective dose는 13.3 mSv로 conventional coronary CT에 비해 25.3%가 감소하였으며, 심장은 80.0 mGy로 22.9%가 감소하였다. 4) 100 kVp의 저관전압과 cardiac dose modulation을 적용한 경우 effective dose는 8.1 mSv로 conventional coronary CT angiography에 비해 54.5%가 감소하였으며, 심장은 49.5 mGy로 52.3%가 감소하였다.

  • PDF

Evaluation of the Accuracy of Distance Measurements on 3D Volume-rendered Image of Human Skull Using Multi-detector CT: Effects of Acquisition Section Thickness and Reconstruction Section Thickness

  • Haijo Jung;Kim, Hee-Joung;Lee, Sang-Ho;Kim, Dong-Wook;Soonil Hong;Kim, Dong-Hyeon;Son, Hye-Kyung;Wonsuk Kang;Kim, Kee-Deog
    • 한국의학물리학회:학술대회논문집
    • /
    • 한국의학물리학회 2002년도 Proceedings
    • /
    • pp.457-460
    • /
    • 2002
  • The image quality of three-dimensional (3D) images has been widely investigated by the qualitative analysis method. A need remains for an objective and quantitative method to assess the image quality of 3D volume-rendered images. The purpose of this study was to evaluate the quantitative accuracy of distance measurements on 3D volume-rendered images of a dry human skull by using multi-detector computed tomography (MDCT). A radiologist measured five times the twenty-one direct measurement line items composed among twelve reference points on the skull surface with a digital vernier caliper. The water filled skull specimen was scanned with a MDCT according to the section thicknesses of 1.25, 2.50, 3.75, and 5.00 mm for helical (high quality; pitch 3:1) scan mode. MDCT data were reconstructed with its acquisition section thickness and with 1.25 mm section thickness for all scans. An observer also measured seven times the corresponding items on 3D volume-rendered images with measuring tools provided by volumetric analysis software. The quantitative accuracy of distance measurements on the 3D volume-rendered images was statistically evaluated (p-value < 0.05) by comparatively analyzing these measurements with the direct distance measurements. The accuracy of distance measurements on the 3D volume-rendered MDCT images acquired with 1.25, 2.50, 3,75 and 5.00 mm section thickness and reconstructed with its section thickness were 48%, 33%, 23%, and 14%, respectively. Meanwhile, there were insignificant statistical differences in accuracy of distance measurements among 3D volume-rendered images reconstructed with 1.25 mm section thickness for the each acquisition section thickness. MDCT images acquired with thick section thickness and reconstructed with thin section thickness in helical scan mode should be effectively used in medical planning of 3D volume-rendered images. The quantitative analysis of distance measurement may be a useful tool for evaluating the quantitative accuracy and the defining optimal parameters of 3D volume-rendered CT images.

  • PDF

CT 검사 시 스캔 범위 내 상지 유무에 따른 영상의 질 평가(LUNG MAN 포함) (Evaluation of Image Quality According to Presence or Absence of Upper limbs in Scan Field of View During CT Examinations (Including LUNG MAN))

  • 장위잉;정하오양;정강교;조유진;조평곤
    • 대한방사선기술학회지:방사선기술과학
    • /
    • 제40권4호
    • /
    • pp.567-573
    • /
    • 2017
  • 본 연구의 목적은 흉 복부 다중검출기전산화단층촬영(multi-detector computed tomography; MDCT)에서 상지를 머리 위로 위치 잡이 할 수 없는 경우 흉 복부에서 거리에 따른 인공유무를 평가하고자 하였다. 128-채널 MDCT로 흉 복부 CT를 위한 인체대상과 흉부 팬텀을 현재 임상에서 검사하고 있는 조건(120 kVp, 110 mAs, standard algorithm)으로 검사하였다. 인체 검사 시 한번은 팔을 머리 쪽으로 올리고 검사하고, 팔을 내린 후 동일한 조건으로 한 번 더 검사하였다. 흉부 팬텀 실험은 환자와 동일한 조건으로 검사를 하고, 상지팬텀을 흉 복부에서 일정한 거리(0, 3, 7 cm)를 두고 검사하였다. 목적하는 부위에 관심영역을 설정하여 CT 값, 노이즈, 신호 대 잡음비, 대조도 대 잡음비를 측정하여 평가하였다. 인체를 대상으로 획득한 영상에서 노이즈는 팔을 올렸을 때와 비교하여 팔을 내렸을 때 지방, 갈비뼈, 근육 모두에서 증가하였다(0.79, 47.8, 27%). 팬텀 영상에서도 상지를 아래로 내렸을 경우 근육, 폐 실질에서 노이즈가 증가하였다(31.2, 9.4%). 또한 상지의 위치가 흉 복부에서 멀어질수록(0, 3, 7 cm) 노이즈가 감소하였다. 근육에서 노이즈는 상지가 흉부와 붙어있을 경우(0 cm)를 기준으로 3 cm, 7cm 떨어졌을 때 5, 25.12% 감소하였고, 폐실질에서 5.6, 15.35% 감소하였다. 흉 복부 CT 촬영 시 갠트리 내 검사 이외의 부위(상지 등)가 위치할 경우 흉 복부로부터 약 3 cm 이상 거리를 유지시킨 후 검사를 진행하면 발생할 수 있는 인공음영을 최소화시킬 수 있을 것으로 사료된다.