• 한국의류학회지
• /
• 제26권10호
• /
• pp.1436-1442
• /
• 2002

In this paper, the effect of the loess and mud of an inorganic substance dyed on cotton knitting fabrics have been studied The structure and chemical composition of loess and mud was analyzed. And the Far-Infrared emissivity and emission power, colorfastness, anti-bacterial properties cotton knitting fabrics dyed with loess and mud were also evaluated. The structure and chemical composion of loess and mud was almost identical structure and to be alike main components were SiO$_2$, Al$_2$0$_3$ and Fe$_2$O$_3$. The cotton hitting fabrics dyed with loess and mud have good colorfastness and anti-bacterial properties. when the dyed fabrics was after-treated with diphenyl ether, the anti-bacterial property were improved. Far-Infrared emissivity and emission power cotton knitting fabrics dyed with loess and mud have very good.

• 한국가정과학회지
• /
• 제5권2호
• /
• pp.93-99
• /
• 2002

In this paper, the effect of the mud of an inorganic substance dyed on cotton knitted fabrics have been studied. The structure and chemical composition of mud was analyzed. And the far-infrared emissivity and emission power, colorfastness, anti-bacterial properties cotton knitted fabrics dyed with mud were also evaluated. The structure and chemical composition of mud was almost identical structure and to be alike main components were SiO2, A1203 and Fe203. The cotton knitted fabrics dyed with mud have good components and anti-bacterial properties. when the dyed fabrics was after-treated with diphenyl ether, the anti-bacterial property were improved. Far-infrared emissivity and emission fewer cotton knitted fabrics dyed with mud have very good.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2019년도 추계 학술논문 발표대회
• /
• pp.23-24
• /
• 2019

In this paper, the compressive strength characteristics of cement paste were compared with the addition of liquefied red mud with the addition of nitric acid in order to improve the strength of the deteriorated cement. The results showed that the compressive strength with between 7 days and 28 days was greater than that of liquefied red mud. The ratio of daily compressive strength of the liquefied red mud is higher than that of the Plain with a 1 percent addition rate, and the ratio of compressive strength is lower than that of the Plain on the 28 days. Therefore, the compressive strength of neutralization liquefied red mud compared to liquidated red mud was relatively high, and the compressive strength of the red mud was shown to be improved to a level almost similar to that of Plain.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2022년도 봄 학술논문 발표대회
• /
• pp.21-22
• /
• 2022

In order to improve the strength degradation of the cement-based material to which strong alkaline liquid red mud was added, the liquid red mud was neutralized with sulfuric acid and added to the cement paste to examine the mechanical properties according to the amount added. As a result of measuring the compressive strength, the strength was higher when the red mud was neutralized with sulfuric acid and added to the cement paste than the cement paste to which the liquid red mud was added. As a result of hydration heat measurement, when red mud was neutralized with sulfuric acid and added to the cement paste, an initial strength higher than that of liquid red mud was expressed.

• 한국산학기술학회논문지
• /
• 제11권6호
• /
• pp.2300-2305
• /
• 2010

대한민국 대표 축제로 자리 잡은 보령머드축제의 핵심 프로그램인 머드 셀프마사지 행사의 재미와 다양성을 부여하기 위하여, 색상이 함유된 머드에 관한 연구를 수행하였다. 머드 고유의 낮은 명도를 조절하고, 황색계열의 색상발현도를 연구하였던 일차적인 연구를 기반으로 하여, 한국의 전통 색을 근간으로 하는 다양한 색상의 유색머드 개발을 하고자, 무기색소(적색산화철, 울트라마린핑크, 울트라마린블루, 크롬옥사이드 그린)를 첨가하여, 각각의 색상발현도를 색차계, 육안검사, 사용감 등으로 판단하였다. 결정된 색상은 물에 젖음 시 발색정도와 세척상태를 검토하여 보령머드 축제 프로그램인 머드 셀프마사지 행사에 사용하여 축제의 다양성을 높이고, 또한 한국의 전통 색을 나타낼 수 있는 유색머드를 개발하고자 하였다.

• 청정기술
• /
• 제15권1호
• /
• pp.38-41
• /
• 2009

적니(red mud)는 보오크싸이트로부터 수산화알루미늄/알루미나를 제조하는 Bayer 공정에서 부산물로 발생되는 폐기물이다. 본 연구에서는 적니로부터 철과 알루미늄을 염산으로 침출시켜 폐수처리용 응집제를 제조하였다. 적니응집제를 합성폐수에 투입한 후 조절된 pH가 증가함에 따라 중금속이온 제거율이 증가하였다. 적니응집제 제조 시에 적니의 양이 증가할수록 Fe의 침출효율은 낮아졌으나, 적니응집제의 pH는 적니의 양이 증가할수록 높아졌다. 적니응집제와 물을 혼합한 용액을 다시 적니와 반응시켜 Fe 및 Al의 농도가 더 증가되고, pH가 향상된 침출액을 얻었다. 이 침출액의 pH는 다른 응집제 $FeCl_3$와 $Fe_2(SO_4)_3$의 pH와 비슷한 값을 보였다.

• 한국양식학회지
• /
• 제9권3호
• /
• pp.293-300
• /
• 1996

Validities of several gene transfer methods including microinjection, electroporation and lipo-fection with luciferase gene (pRSVL), and effectiveness of mud loach expression vector which contains ARS from mud loach on production of transgenic mud loach were evaluated. Microiniection revealed the $0\~8\%$ of transgene incidence in 2-week-old fish with significant mosaicism. Electroporation and lipofection of mud loach sperm also successfully introduced the transgene into sperm cells, and transferred the foreign DNA into zygote. Gene transfer by electroporation and lipofection showed a range of $0\~28\%$ and $0\~48.1\%$ of transgene incidence, respectively in newly hatched larvae, altough most DNA introduced were gradually degraded with the development of fish. Microinjections of mud loach expression vector caused a significantly reduced survival rate of mud loach embryos with severe teratogenic effects, and ARS/Luc transgene could not be detected in normally developed fish after microinjection.

• 대한기계학회논문집 C: 기술과 교육
• /
• 제4권2호
• /
• pp.85-92
• /
• 2016

LNG선의 발라스트 탱크에 해수를 유입할 때 해수에 부유하고 있는 해저면의 머드 입자가 탱크 안으로 유입되고 탱크내에 침전되는 문제가 발생한다. 탱크에서 해수를 배출 할 때에 침전된 머드를 함께 제거할 수 있도록 발라스트 탱크 내에 머드 플러싱 시스템을 적용하였다. 본 연구에서는 플러싱 시스템의 머드 제거 효과를 평가하기 위해 입자 크기 분석기를 통해 머드의 입자 크기를 측정 하였으며, 입자 크기와 전단 응력의 관계를 바탕으로 수치해석을 통해 머드의 부유 성능을 평가하였다. 탱크내 머드 플러싱 배관 시스템을 최적화하여 탱크내 머드 부유 성능을 극대화하였다.

• 한국농공학회논문집
• /
• 제55권3호
• /
• pp.35-40
• /
• 2013

The present study was conducted to investigate the adsorption potential of red mud for fluoride removal. Different operation parameters such as the effect of contact time, initial concentration, pH, competing anions, seawater, adsorbent dose amount, and adsorbent mixture were studied. Nearly 3 hr was required to reach sorption equilibrium. Equilibrium sorption data were described well by Langmuir model and the maximum adsorption capacity of red mud was 5.28 mg/g. The fluoride adsorption at pH 3 was higher than in the pH range 5-9. The presence of anions such as sulfate, nitrate, phosphate, and bicarbonate had no significant effect on fluoride adsorption onto red mud. The fluoride removal by red mud was greater in seawater than deionized water, resulting from the presence of calcium and magnesium ion in seawater. The use of red mud alone was more effective for the removal of fluoride than mixing red mud with other industrial waste such as oyster shells, lime stone, and steel slag. This study showed that red mud has a potential application in the remediation of fluoride contaminated soil and groundwater.

• 한국재료학회지
• /
• 제29권11호
• /
• pp.664-669
• /
• 2019

In this paper, a water-based green polymer mud is synthesized by simple compounding method. Effects of different kinds of tackifiers, their molecular weight on the viscosity of polymer mud and the effects of different fluid loss additives on mud fluid loss are studied. The results show that when polystyrene and anionic polyacrylamide with molecular weight of 8 ~ 10 million are used as the main thickening ingredient, polymer mud with high viscosity and high stability can be obtained. When the prepared polymer mud is formulated as NPAM: PEO: Hydroxypropyl cellulose(HPC) : Water = 42:10:10:100000 (unit: kg), the viscosity can reach 20.6 s, the filtration loss in 7.5 min is 24 mL, and the sand content is only 0.1 %. Compared with traditional bentonite mud, the green environment-friendly polymer mud has the advantages of small amount of waste, low environmental pollution, and low pulping cost, and can meet the construction needs for most topography and geomorphology drilling engineering.