• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2004.10a
• /
• pp.1190-1193
• /
• 2004

The purpose of this study is to evaluate the possibility of identifying joint damping property through commercially available isokinetic ergometer (BIODEX). The proposed method is to estimate the damping torque of the knee joint from the difference between the external joint torque for maintaining isokinetic movement and the gravity torque of the lower leg. The damping torque was estimated at various joint angular velocities, from which the damping property would be derived. Measurement setup was composed of the BIODEX system with an external force sensor and Labview system. Matlab was used in the analysis of the damping property. The experimental result showed that the small variation in angular velocity due to acceleration and deceleration of the crank arm resulted in greater change of inertial torque than the damping torque, so that the estimation of damping property from the isokinetic movement is difficult.

• Journal of the Korean Operations Research and Management Science Society
• /
• v.18 no.2
• /
• pp.105-130
• /
• 1993

This study deals with finding a schedule for the movement of a material handling device (elevator) in a manufacturing plant. Two different algorithm (Traveling Salesman Technique and Greedy Algorithm) are used in the scheduling of the elevators using a simulation technique to determine the proper method of scheduling the elevator movement. Based on the simulation analysis, we have found that the Greedy algorithm serves better than the algorithm based on Traveling Salesman technique for scheduling the movement of a material handling device in the manufacturing plant.

• The Journal of the Korea Contents Association
• /
• v.8 no.9
• /
• pp.226-233
• /
• 2008

The objective of this study is to use the Korean Automobile Industry to exemplify typical problems with Korean capitalism by studying the structural characteristics of the Asian New Industrialization movement and analyzing the establishment and reorganization of the Korean Big Three System. Through comparative analysis taken from previous research, it was found that the Asian New Industrialization movement emphasized not only exports also but also included the importing of parts to Japan. Additionally, the pattern of development, technical accumulation, and other characteristics of the automobile industry were analyzed from the perspective of the Asian New Industrialization movement. Since the start of this movement is closely associated with the history of Korean capitalism, we have also analyzed the structural characteristics of the Korean New Industrialization movement. Through this analysis, that the study clearly shows that the Korean Automobile Industry has the framework characteristics of the Asian New Industrialization movement.

• Journal of Korean Institute of Industrial Engineers
• /
• v.39 no.6
• /
• pp.577-586
• /
• 2013

In a shipyard, it is hard to predict block movement due to the uncertainty caused during the long period of shipbuilding operations. For this reason, block movement is rarely scheduled, while main operations such as assembly, outfitting and painting are scheduled properly. Nonetheless, the high operating costs of block movement compel task managers to attempt its management. To resolve this dilemma, this paper proposes a new block movement analysis framework consisting of the following operations: understanding the entire process, log clustering to obtain manageable processes, discovering the process model and detecting exceptional processes. The proposed framework applies fuzzy mining and trace clustering among the process mining technologies to find main process and define process models easily. We also propose additional methodologies including adjustment of the semantic expression level for process instances to obtain an interpretable process model, definition of each cluster's process model, detection of exceptional processes, and others. The effectiveness of the proposed framework was verified in a case study using real-world event logs generated from the Block Process Monitoring System (BPMS).

• Journal of the Society of Naval Architects of Korea
• /
• v.44 no.6
• /
• pp.647-656
• /
• 2007

Simulation model of outdoor block movement of shipyard is implemented in this paper. The load of the outdoor workshops in a shipyard influences a mid-term planning and scheduling of the shipyard. Since the load analysis is expected in advance before confirming the planning and scheduling, a discrete event simulation (DES) may be a good solution. The accuracy of DES is up to the accurate modeling of Products, Processes, and Resources (PPR) included in a system. PPR in the outdoor system are clearly defined and the simulation model for the outdoor logistics is implemented by modeling the selective PPR with the help of a DES tool which is programmable by users. The simulation model is verified by comparing the results with the real shipyard data. The outputs through the simulation are discussed.

• Journal of the Korea Institute of Military Science and Technology
• /
• v.14 no.2
• /
• pp.173-180
• /
• 2011

SRMD system which protects MBT from the threats in a short range is composed of 2 radars, 2 IRTs 1 CCU and 2 countermeasures. To analyze the performance of this system, there is a need to make the model of MBT on which this system is loaded. In this paper, a method of MBT movement modeling is proposed to fulfill the above need. The methods of the coordinate system transformation among the components and the modeling of a hull's traveling and a turret's turning are proposed. The method of the modeling of a pose variation caused by the vibrations is proposed and the results of the modeling are presented.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.15 no.5
• /
• pp.2989-2995
• /
• 2014

This study was to performed to get the reference data of the kinematic parameters for normal subjects according to the arm movement type. Forty-five normal subjects participated in this study and preformed four sequence according to the arm movement type : normal arm movement, one arm movement, no arm movement, fitness arm movement. The study data was collected from June to August 2010. The kinematic data were measured using Vicon motion system 6MX3 cameras while each subjects walked through a 10m walkway. There were significant differences according arm movement type in the kinematic parameters such as range of motion (ROM) of the right pelvic, hip in sagittal plane, and ROM of the pelvic, hip, lumbar in coronal plane and ROM of the pelvic, thoracic, lumbar in transverse plane. This study can be utilized as the basic reference data in gait analysis for patients with pathologic gaits.

• Structural Engineering and Mechanics
• /
• v.50 no.1
• /
• pp.105-119
• /
• 2014

This study presents a steel container crane movement analysis and assessment based on structural health monitoring (SHM). The accelerometers are used to monitor the dynamic crane behavior and a 3-D finite element model (FEM) was designed to express the static displacement of the crane under the different load cases. The multi-input single-output nonlinear autoregressive neural network with external input (NNARX) model is used to identify the crane dynamic displacements. The FEM analysis and the identification model are used to investigate the safety and the vibration state of the crane in both time and frequency domains. Moreover, the SHM system is used based on the FEM analysis to assess the crane behavior. The analysis results indicate that: (1) the mean relative dynamic displacement can reveal the relative static movement of structures under environmental load; (2) the environmental load conditions clearly affect the crane deformations in different load cases; (3) the crane deformations are shown within the safe limits under different loads.

• The Journal of Korea CHUNA Manual Medicine
• /
• v.5 no.1
• /
• pp.223-235
• /
• 2004

Until now, there have been no study about kinematic analysis of trunk with meridian muscular system. The purpose of this article is to contribute to the knowledge of meridian muscles of trunk that are related with breathing and basic movements. We research into respiration mechanics analysis and basic trunk movement analysis. And we suggest that the studies of the therapy that apply meridian muscles in trunk and respiration abnormality are more necessary.

• Smart Media Journal
• /
• v.12 no.9
• /
• pp.116-123
• /
• 2023

In this study, I will describe the difference in operating methods centered on the game operating system between beginners and expert groups in MORPG PC games and focus on the methodology to analyze them. First of all, a hypothesis was established to distinguish between beginners and expert groups based on the manipulation system of character movements commonly used in MORPG, and through this distinction, it was analyzed whether finger movement data and key stroke data related to the manipulation system can be significantly used in the future. Based on these analysis results, it was found that the analysis methodology that combines finger motion data and key stroke analysis is meaningful as a user test methodology for the PC MORPG game operating system in the future.